26 March 2015 in Nanoscale
The surface state of graphene quantum dots (GQDs) is related to the hybridization structure of the edge groups and the connected graphene core. Efficient edge groups for green emission are mainly carboxyl, carbonyl and amide.
15 February 2016 in Journal of Materials Chemistry C
Graphene quantum dots (GQDs) with a variety of functional groups are studied by adjusting the pH of the solvents and through reduction using chemical methods. Our study suggests that the –CO–OH and –CO–N(CH3)2 groups could contribute to the green fluorescence emission (peak at 500–520 nm), and the –CO–N(CH3)2 group could form the green fluorescence emission state more effectively. Additionally, –OH groups and free zigzag sites may contribute to the blue fluorescence emission (peak at around 420 nm). The edge states and functional groups commonly constitute fluorescence emission centers. Additionally, both blue and green fluorescence emission centers corresponding to the molecule-like states could be quenched using the electron acceptor methyl viologen, which barely affects the intrinsic state of the carbon honeycomb flat structure.
6 September 2021 in IEEE Journal of Solid-State Circuits
This article presents a millimeter-wave (mmW) frequency synthesizer based on a new charge-sharing locking (CSL) technique. A charge-preset capacitor is introduced for charge sharing with a resonant LC -tank for phase correction, while the resulting charge residue on the sharing capacitor is processed by a digital frequency-tracking loop (FTL) against the process, voltage, and temperature (PVT) variations. Furthermore, a general phase noise (PN) theory of CSL, with injection locking (IL) being a special case, is proposed based on a unified multirate ${z}$ -domain model, supporting any frequency division ratio ${N}$ and CSL (or IL) strength $\beta $ . The new theory sheds light not only on all IL-like PN phenomena (chiefly, its “loop” bandwidth being up to half of the reference frequency, and the oscillator PN increasing 3 dB beyond the “loop” cutoff frequency) but also on how to choose the CSL bandwidth via the sharing capacitor in order to optimize the rms jitter performance. The prototype in 28-nm CMOS achieves 77-fs rms jitter in 21.75—26.25 GHz while consuming 16.5 mW for mmW quadrature frequency generation.
11 August 2021 in IEEE Journal of Solid-State Circuits
This article presents a low-power fractional- ${N}$ all-digital phase-locked loop (ADPLL) employing a reference-waveform oversampling (ROS) phase detector (PD) that increases its effective rate four times, thus leading to lower jitter and settling time. The proposed ROS-PD adopts a bottom-plate sampling with a voltage zero-forcing technique, which yields high power efficiency and supports fractional phase compensation in the voltage domain through a programmable DAC. The PD output is then amplified by a low-noise gated amplifier and digitized by a low-power successive approximation register analog-to-digital converter (SAR-ADC). Leveraging the benefits of digital architecture, gain mismatches from the waveform estimator are calibrated by means of an LMS algorithm, consequently lowering fractional spurs. The proposed ADPLL is implemented in TSMC 28-nm LP CMOS. The prototype generates a 2.0–2.3-GHz carrier with an rms jitter of 414 fs while consuming only 1.15 mW. This corresponds to a state-of-the-art ADPLL FoM jitter of −247 dB in a fractional- ${N}$ mode. Due to the wide (largely linear) monotonic range and $4\times $ oversampling rate from a 48-MHz reference, without any additional circuitry, the proposed ADPLL can settle within $3~\mu \text{s}$ in face of a 70-MHz frequency step.
17 July 2020 in IEEE Journal of Solid-State Circuits
We present a new analog-to-digital converter (ADC)-based architecture of a phase-tracking receiver (PT-RX) optimized for ultra-low-power (ULP) and ultra-low-voltage (ULV) operations for the Internet of Things (IoT). The RX employs a type-II loop configuration that offers improved stability compared with the previous type-I PT-RX solutions. In addition, the type-II loop is also very tolerant of long run-lengths of consecutive ``1'' or ``0'' symbol sequences. Fabricated in 28-nm CMOS, the prototype PT-RX targets Bluetooth low energy (BLE) standard consuming only 1.5 mW at a supply of ≤0.7 V. It maintains an adjacent-channel rejection (ACR) of ≥-11/3.5/17/27 dB at 0/±1/±2/±3 MHz offset and can tolerate out-of-band (OOB) blockers of minimum -21 dBm across 1.0-3.5 GHz while also offering a best-in-class figure of merit (FoM) of 181 dB, with a 1-Mb/s BLE sensitivity of -93 dBm.
2 August 2021 in IEEE Journal of Solid-State Circuits
We introduce a new mode of oscillation in an LC -tank: an inverse class-F 23 . In contrast to the conventional class-F oscillators, in which a high value of the real impedance (i.e., resistance) is presented to the third (in class-F 3 ) or/and to the second (in class-F 2 /class-F 23 ) oscillator harmonics via an auxiliary resonance, here low resistive impedances (resembling a non-ideal short) are presented at both the second and third harmonics. This is made possible by tight magnetic coupling in the differential and common modes, respectively, afforded by a new compact 2:3 transformer. Being largely free from the harmonics in the voltage waveform and their possible deleterious phase shift effects on the flicker noise up-conversion, the phase noise performance in the flicker and thermal regions is further improved by narrowing the conduction angle. The 2:3 step-up transformer also provides a high passive gain to help with the startup in face of low supply. The switched-capacitor banks and cross-coupled transistor pair are carefully integrated under the transformer with a special arrangement of native (high-resistivity) substrate layer to mitigate their effect on the oscillation while reducing the area by 30%. The proposed digitally controlled oscillator (DCO) is implemented in 28-nm CMOS and achieves −95 dBc/Hz and −118 dBc/Hz at 100 kHz and 1 MHz offsets, respectively, while operating at a 0.3 V supply. The measured $1/f^{3}$ corner stays within 60 to 100 kHz over the 35% tuning range (TR) (from 2.02 to 2.87 GHz). This results in a figure-of-merit (FoM) with normalized TR (FoM T ) of −196 and −199 dB at 100 kHz and 1 MHz offsets, respectively, is a record in the space of ≤0.5 V and ≤1 mW.