1 January 2004 in Journal of Biomaterials Science, Polymer Edition
A crosslinked polyurethanurea (PUU) coating was synthesised from a solution on metal vascular stents. In the model system the glucocorticoid prednisolone was inserted into the film by the equilibri...
15 May 2020 in Proceedings of the Voronezh State University of Engineering Technologies
When creating filled polymer composite materials, difficulties often arise due to poor compatibility of polymers with modifying additives. To solve such problems, surface-active substances (SAS) are successfully used in many industries, but they are practically not used in polymer processing. This is largely due to the insufficient assortment of surfactants produced that are suitable for introduction into polymers, especially film-forming ones. Anionic and nonionic surfactants are used in the synthesis and processing of elastomers, but they are not used in the production of film materials. As for the use of cationic surfactants, there are still no data at all. They differ from other types of surfactants in a variety of structures, in the number and relative positions of cationic centers and hydrophobic radicals, and also in antimicrobial properties. The prospects of using quaternary ammonium salts for the modification of packaging materials are shown. The expediency of using cationic surfactants for the modification of polymeric materials is proved. It is shown that the use of quaternary ammonium salts improves the physical and mechanical properties of films based on polyethylene and polypropylene. It is proved that cationic surfactants are technologically compatible with polyolefins, which allows the processing of polymer compositions by extrusion. Today, the most common polymers for food packaging are polyethylene and polypropylene. This is due to their low cost, safety in contact with food products, and suitability for processing into films of different thicknesses. More and more attention is being paid to the creation of packaging materials with antimicrobial properties. The imparting of such properties is achieved by introducing an antimicrobial additive into the polymer melt. It is most expedient to introduce additives directly into the melt of the polymer composition during processing, since, for example, during the extrusion process, polymer homogenization with the additive.
30 September 2019 in Health, Food & Biotechnology
ДЗДарья Михайловна Загребина
Дарья Михайловна Загребина
Утилизация многослойных полимерных материалов затруднена, из-за сложности в процессах сортировки и разделения смешанных отходов, поэтому чаще всего они попадают на свалки, полигоны или сжигаются, что приводит к экологической и экономической проблеме в стране. В настоящее время существуют способы переработки отходов упаковки с исключением стадии сортировки при помощи химико-физической модификации. Статья посвящена проведению процесса модификации полиолефиновых смесей на основе полиэтилена и полипропилена, а также проведению комплексного исследования полученного вторичного сырья, которое направлено на увеличение технологической совместимости полимерных материалов для разработки технологии рециклинга с перспективой возврата полимерных композиций в производственный цикл. В работе были поставлены следующие задачи: провести комплексное исследование полимерных композиций на основе полиолефинов, которые модифицированы сополимером этилена с пропиленом в различном соотношении компонентов; изучить влияние модификатора на физико-механические свойства полимерных смесей; изучить влияние реологических свойств полимерных композиций, модифицированных сополимером; предложить технологию повторной переработки вторичных полиолефиновых композиций в производственный цикл. В качестве объектов исследования использовали полиэтилен, полипропилен и сополимер этилена с пропиленом, как связующее звено, в разном соотношении компонентов. Образцы получали на лабораторном одношнековом экструдере при многократной переработке. Научные исследования проведены с использованием метода капиллярной вискозиметрии, пикнометрического метода для определения реологических свойств, метода одноосного растяжения для изучения физико-механических свойств полимерных композиций. Установлено, что введение модификатора (сополимер этилена с пропиленом) приводит к увеличению относительного удлинения при разрыве у полимерных композиций в соотношении 70% полиэтилена 30% полипропилена и разрушающее напряжение для композиций на основе полиэтилена и полипропилена в соотношении 50:50 и 30:70 соответственно. В результате проведенных исследований предложена технология получения многослойных упаковочных материалов с использованием отходов упаковки в среднем слое для контакта с пищевыми продуктами; предложена технология переработки полиолефиновых смесей различной химической природы без предварительной сортировки, с получением упаковки технического назначения и предметов бытового использования.
26 June 2019 in Food Processing: Techniques and Technology
The research features a comprehensive study aimed at increasing the technological compatibility of multilayer packaging materials. The paper describes a recycling technology with the prospect of returning the resulting secondary raw materials to the production cycle. The research included the following tasks: to conduct a comprehensive study of polyolefin mixtures modified by ethylene propylene copolymer; to study the effect of the copolymer on the rheological and physicomechanical properties of polymer compositions; to propose a technology for the recycling of secondary polyolefin mixtures. The research involved the following methods: the capillary viscometry method was used to determine the rheological properties of polymer compositions; the tensile test method was employed to define the physicomechanical properties of the compositions; the pycnometric method was used to assess the density of the mixtures. The study featured such polymers as polyethylene, polypropylene, and ethylene-propylene copolymer, which was chosen as a link between the polymers. The authors obtained polymer compositions in various ratios of polyethylene, polypropylene, and ethylene-propylene copolymer: 70:30:0; 68.5:28.5:3; 65:25:10; 30:70:0; 28.5: 68.5: 3; 25:65:10. The article describes the process of modifying polyolefin compositions based on polyethylene and polypropylene by ethylene-propylene copolymer on a single-screw extruder. The authors defined the rheological properties and the deformation-strength characteristics of the polymer mixtures. Repeated processing proved to lead to a decrease in the physicomechanical properties of polyolefin mixtures, with the exception of compositions based on polyethylene and polypropylene in the ratio of 30:70, where the breaking stress increased. The number of processing cycles increased the melt flow rate of the mixtures. The proposed technology is meant for producing multilayer packaging materials using packaging waste in the middle layer for contact with food.