(PZT-ZnO) heterostructures were fabricated by using a sol-gel process. Capacitance-voltage measurements performed on a wide temperature range (20–450 K) have revealed the presence of a hysteresis that undergo a change of direction from clockwise at temperatures below 350 K to counter-clockwise at higher temperatures. In the first case, the hysteresis is produced by charge injection, similar to the case of classical metal-oxide-semiconductor capacitors. In the last case, the hysteresis is the fingerprint of polarization reversal, as reported for metal-ferroelectric-semiconductor (MFS) structures based on n-Si. The memory window at 450 K is about 6 V. This result suggests that PZT-ZnO MFS heterostructures can be used for memory devices working at elevated temperatures, in which the ZnO plays the role of the semiconductor.
25 January 2019 in Journal of Materials Chemistry C
We investigate how far the hysteresis-free behavior of perovskite solar cells can be reproduced using particular pre-conditioning and measurement conditions. As there are currently more and more reports of perovskite solar cells without J–V hysteresis it is crucial to distinguish between genuine performance improvements and measurement artifacts. We focus on two of the parameters that influence the dynamic J–V scans, namely the bias scan rate and the bias poling voltage, and point out measurement conditions for achieving a hysteresis-free behavior. In this context we discuss the suitability of defining a hysteresis index (HI) for the characterization of dynamic J–V scans. Using HI, aging effects are also investigated, establishing a potential connection between the sample degradation and the variation of the maximal hysteresis on one hand, and the relaxation time scale of the slow process on the other hand. Pre-poling induced recombination effects are identified. In addition, our analysis based on sample pre-biasing reveals potential indications regarding two types of slow processes, with two different relaxation time scales, which provides further insight regarding ionic migration.
This study reports on the results obtained after doping the [CH 3 NH 3 ] 0.94 [C 3 N 2 H 5 ] 0.06 PbI 2.6 Cl 0.4 mixt halide perovskite with europium or antimony (Eu 3+ /Sb 3+ ) at the ‘B site’. This way two new complex compounds were obtained, [CH 3 NH 3 ] 0.94 [C 3 N 2 H 5 ] 0.06 Pb 1-y B y I 2.6 Cl 0.4 (B = Eu or Sb and y = 0–0.05) as perovskite precursor solutions and deposited as thin films. The properties of the perovskite films were investigated by various characterization techniques: x-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), UV–vis spectroscopy while the photovoltaic parameters were determined by measuring the IV curves of the corresponding solar cells. We find that doping the mixt halide perovskite with very small quantities of Sb improves the quality of the perovskite films and further improves the stability of perovskite solar cells.
Europium doped zinc oxide (Eu:ZnO) thin films have been obtained by pulsed laser deposition (PLD). 002 textured thin films were achieved on glass and silicon substrates, while hetero-epilayers and homo-epilayers have been attained on single crystal SrTiO 3 and ZnO, respectively. X-ray Diffraction (XRD) was employed to characterize the Eu:ZnO thin films. Extended XRD studies confirmed the different thin film structural properties as function of chosen substrates.
PbZr0.2Ti0.8O3-BiFeO3-PbZr0.2Ti0.8O3 (PZT-BFO-PZT) structure was prepared by sol-gel method on Pt/Si wafers. Three metals were tested as top electrod: Au, Cu, and Pt. A double hysteresis loop was observed in all cases, suggesting an antiferroelectric-like behavior. The values for remnant polarization and coercive field are about 3 μC/cm2 and 115 kV/cm, respectively. The saturation polarization is about 22 μC/cm2. Capacitance and leakage current show significant dependence on the top metal electrode. The results were explained considering the presence of a Schottky-type contact at the PZT-metal interface.