15 October 2024 in Journal of Microelectromechanical Systems
This work reports an acoustic solidly mounted resonator (SMR) at 18.64 GHz, among the highest operating frequencies reported. The device is built in scandium aluminum nitride (ScAlN) on top of silicon dioxide (SiO $_{2})$ and tantalum pentoxide (Ta $_{2}$ O $_{5})$ Bragg reflectors on silicon (Si) wafer. The stack is analyzed with X-ray reflectivity (XRR) and high-resolution X-ray diffraction (HRXRD). The resonator shows a coupling coefficient ( $k^{2})$ of 2.0%, high series quality factor ( $Q_{s})$ of 156, shunt quality factor ( $Q_p)$ of 142, and maximum Bode quality factor ( $Q_{max})$ of 210. The third-order harmonics at 59.64 GHz is also observed with $k^{2}$ around 0.6% and $Q$ around 40. Upon further development, the reported acoustic resonator platform can enable various front-end signal-processing functions, e.g., filters and oscillators, at future frequency range 3 (FR3) bands.2024-0120
25 March 2025 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
This paper reports the first groups of low-loss acoustic solidly mounted resonators (SMR) and acoustic delay lines (ADL) at 14-20 GHz. Bulk acoustic waves (BAW) are confined in thin-film scandium aluminum nitride (ScAlN) on top of dielectric acoustic Bragg reflectors, consisting of alternating silicon dioxide with tantalum pentoxide (Ta2O5/SiO2) or niobium pentoxide (Nb2O5/SiO2) on Si carrier wafers. Stack material parameters are extracted via high-resolution X-ray diffraction (HRXRD) and X-ray reflectivity (XRR). The simulation and experiment show confinement for longitudinal BAW from 14-20 GHz. ADLs show high propagation Q above 478 and 171 for Ta2O5/SiO2 and Nb2O5/SiO2, respectively. SMRs in both stacks perform similarly, showing coupling coefficient (k2) of 2.0%, series Q (Qs) of 156, and parallel Q (Qp) values of 140 for Ta2O5/SiO2, while k2 of 2.4%, Qs of 140, and Qp of 109 for Nb2O5/SiO2, both at 18.6 GHz. Upon development, ScAlN solidly mounted platforms will enable signal processing elements with better power handling.
2 April 2026 in IEEE Transactions on Ultrasonics
Piezoelectric micromachined ultrasonic transducers (PMUTs) are widely utilized in applications that demand mechanical resilience, thermal stability, and compact form factors. Recent efforts have sought to demonstrate that single-crystal lithium niobate (LN) is a promising PMUT material platform, offering high electromechanical coupling (k2) and bidi-rectional performance. In addition, advances in LN film transfer technology have enabled high quality periodically poled piezoelectric films (P3F), facilitating a bimorph piezoelectric stack without intermediate electrodes. In this work, we showcase a bimorph PMUT incorporating a mechanically robust, 20 μm thick P3F LN active layer. We establish the motivation for LN PMUTs through a material comparison, followed by extensive membrane geometry optimization and subsequent enhancement of the PMUT’s k2. We demonstrate a 775 kHz flexural mode device with a quality factor (Q) of 200 and an extracted k2 of 6.4%, yielding a high transmit efficiency of 65 nm/V with a mechanically robust active layer. We leverage the high performance to demonstrate extreme-temperature resilience, showcasing stable device operation up to 600 °C and survival up to 900 °C, highlighting LN’s potential as a resilient PMUT platform.
26 January 2026 in Applied Physics Letters
We demonstrate a record-high 62.6 GHz solidly mounted acoustic resonator (SMR) incorporating a 67.6 nm scandium aluminum nitride (Sc0.3Al0.7N) piezoelectric layer on a 40 nm buried platinum (Pt) bottom electrode, positioned above an acoustic Bragg reflector composed of alternating SiO2 (28.2 nm) and Ta2O5 (24.3 nm) layers in 8.5 pairs. The Bragg reflector and piezoelectric stack above are designed to confine a third-order thickness-extensional bulk acoustic wave mode, while efficiently transducing with thickness-field excitation. The fabricated SMR exhibits an extracted piezoelectric coupling coefficient (k2) of 0.8% and a maximum Bode quality factor (Q) of 51 at 63 GHz, representing the highest operating frequency reported for an SMR to date. These results establish a pathway toward mmWave SMR devices for filters and resonators in next-generation RF front ends.
6 October 2026 in APL Electronic Devices
We characterize a 20-μm-thick bimorph X-cut lithium niobate (LN) piezoelectric micromachined ultrasonic transducer from room temperature to 1000 °C using an open-air measurement platform built around a fully packaged device—gold wire bonds on a ceramic printed circuit board. The platform sustains continuous operation at 800 °C, confirmed by frequency-response measurements at the start and end of a 1-h dwell. A sodium-silicate bondline that fills coefficient-of-thermal-expansion-driven substrate cracks as they form is central to sustained operation above 500 °C. The flexural resonance shifts downward with increasing temperature up to the onset of substrate cracking, and a coherent simple-harmonic-oscillator/modified Butterworth–Van Dyke fit extracts a temperature-dependent effective stiffness for LN up to ∼400 °C; above the 500–600 °C cracking onset, the resonance evolves non-monotonically as crack formation and bondline stabilization successively modify the modal boundary conditions. The measurement terminates near 1000 °C as the gold electrodes dewet and diffuse approaching their melting point (∼1064 °C), rather than at any LN material limit, indicating that packaging and metallization—not the piezoelectric film—set the practical ceiling for these devices. The platform is reusable for high-operating-temperature microelectromechanical systems beyond this device.