Zhirui Zong

Zhirui Zong

Auto-generated profile, based on publicly available information

Zhirui Zong

Hong Kong University of Science and Technology (Guangzhou)

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 December 2018 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Open access
ZZZhirui Zong
Zhirui Zong
PCPeng Chen
Peng Chen
RSRobert Staszewski
Robert Staszewski
In this paper, we propose a 60-GHz fractional-N digital frequency synthesizer aimed at reducing its phase noise (PN) at both the flicker (1/f 3 ) and thermal (1/f 2 ) regions while minimizing its power consumption. The digitally controlled oscillator (DCO) fundamentally resonates at 20 GHz and co-generates a strong third harmonic at 60 GHz which is extracted to the output while canceling the 20-GHz fundamental. The latter component is fed back to the frequency dividers in an all-digital phase-locked loop for phase detection, which comprises a pair of digital-to-time and time-to-digital converters with ΣΔ dithering to attenuate fractional spurs. The mechanism of flicker noise upconversion to 1/f 3 PN in the DCO is investigated, and a reduction technique is proposed. The 28-nm CMOS prototype achieves 213-277-fs rms jitter in the 57.5-67.2-GHz tuning range while consuming only 40 mW. The DCO flicker PN corner is record low at 300-400 kHz.

26 September 2019 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Open access
PCPeng Chen
Peng Chen
FZFeifei Zhang
Feifei Zhang
ZZZhirui Zong
Zhirui Zong
SHSuoping Hu
Suoping Hu
TSTeerachot Siriburanon
Teerachot Siriburanon
RSRobert Staszewski
Robert Staszewski
This article proposes a power-efficient highly linear capacitor-array-based digital-to-time converter (DTC) using a charge redistribution constant-slope approach. A fringe-capacitor-based digital-to-analog converter (C-DAC) array is used to regulate the starting supply voltage of the constant discharging slope fed to a fixed-threshold comparator. The DTC operation mechanism is analyzed and design tradeoffs are investigated. The proposed DTC consumes merely 31 μW from a 1-V supply when clocked at 40 MHz, while achieving a fine resolution of 148 fs over a 9-bit range. The measured differential nonlinearity (DNL) and integral nonlinearity (INL) are 0.96/1.07 LSB.

28 December 2020 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
Yiming YuYiming Yu
Yiming Yu
JZJiahong Zhu
Jiahong Zhu
ZZZhirui Zong
Zhirui Zong
PTPan Tang
Pan Tang
HLHuihua Liu
Huihua Liu
KKKai Kang
Kai Kang
This brief presents a wideband millimeter-wave (mm-Wave) low noise amplifier (LNA) with a triple-coupled technique for multiband wireless applications. To enlarge the gain and reduce the supply voltage, a modified cascode topology exploiting a triple-coupled transformer is developed. Thanks to the transformer, the transconductance of the common-gate (CG) transistor of the cascode topology is also effectively boosted, and hence the gain is further increased. Furthermore, high-order networks, which are realized by combinations of π-and T/L-type structures or transformers, are employed to implement the input, inter-stage, and output impedance matchings. They significantly broaden the bandwidth of the circuit. The LNA is demonstrated using a commercial 65-nm CMOS process. The measurement results show that the circuit achieves a maximum gain of 28.5 dB and a 3-dB gain bandwidth of 20 GHz with 32-mW dc power consumption (Pdc). The measured noise figure (NF) and input 1-dB gain compression point (IP1dB) are 2.7 3.2 dB and -24.6 -20.4 dBm, respectively, over the entire operating bandwidth.

9 October 2018 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Open access
YCYue Chen
Yue Chen
YLYao-Hong Liu
Yao-Hong Liu
ZZZhirui Zong
Zhirui Zong
JDJohan Dijkhuis
Johan Dijkhuis
GDGuido Dolmans
Guido Dolmans
MBMasoud Babaie
Masoud Babaie
In this paper, we propose a method to suppress supply pushing of an LC oscillator such that it may directly operate from a switched-mode dc-dc converter generating fairly large ripples. A ripple replication block (RRB) generates an amplified ripple replica at the gate terminal of the tail current source to stabilize the oscillator's tail current and thus its oscillating amplitude. The parasitic capacitance of the active devices and correspondingly the oscillation frequency are stabilized in turn. A calibration loop is also integrated on-chip to automatically set the optimum replication gain that minimizes the variation of the oscillation amplitude. A 4.9-5.6-GHz oscillator is realized in 40-nm CMOS and occupies 0.23 mm² while consuming 0.8-1.3 mW across the tuning range (TR). The supply pushing is improved to <1 MHz/V resulting in a low <-49-dBc spur due to 0.5-12-MHz sinusoidal supply ripples as large as 50 mVpp. We experimentally verify the effectiveness of the proposed technique also in face of saw-tooth, multi-tone, and modulated supply ripples.

10 September 2020 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
Yiming YuYiming Yu
Yiming Yu
JCJia Cao
Jia Cao
ZZZhirui Zong
Zhirui Zong
PTPan Tang
Pan Tang
KYKai Yi
Kai Yi
KKKai Kang
Kai Kang
This article presents a wideband millimeter-wave power amplifier (PA) with a capacitive stability enhancement technique. It is composed of three differential cascode stages to attain high-power gain and large output power. To ensure the stabilization of the amplifier, a robust technique based on a series base capacitor is proposed and applied in each stage. Each capacitor creates a low-frequency zero to adjust the phase and amplitude responses of the differential cascode structure. As a result, the phase margin of the loop gain is increased remarkably. By adjusting the series base capacitors, the low-frequency zeros and gains of the three stages can be optimized. Therefore, the operating bandwidth is also extended. Meanwhile, a transformer-based four-path power combination network with a large current capacity is developed to further enlarge the output power. The circuit is demonstrated in a commercial 0.13 μm SiGe BiCMOS process. According to the measurement results, the PA obtains a saturated output power (PSat) of 18.5 dBm and output referred 1-dB compression point (OP1 dB) of 16.32 dBm at 77 GHz. The tested small-signal gain is 26.7 dB at 77 GHz. Its 3 dB gain bandwidth is beyond 21.5 GHz, which ranges from 68.5 to 90 GHz. The PSat variation is less than 0.57 dB at the frequency range from 70 to 85 GHz. The measurement also shows the PA with the proposed technique is unconditionally stable over the entire frequency band. The chip area is only 0.684 mm².

17 January 2025 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
BCBolin Chen
Bolin Chen
ZZZhirui Zong
Zhirui Zong
This article presents an E-band receiver (RX) with spillover cancellation for frequency-modulated continuous-wave (FMCW) radars. To reject spillover from both TX-RX coupling and undesired reflections from radar assembly (such as bumper reflection), a spillover replication method based on frequency-delay translation through a single-sideband (SSB) modulator is introduced. To keep the RX performance immune from strong spillover, we propose an in-low-noise amplifier (LNA) common-mode voltage-domain canceller. It provides high isolation between the RX signal chain and cancellation path, minimizing noise figure (NF) degradation. Spillover is rejected in the input voltage domain before entering the critical LNA stage and inducing current, thereby preserving the linearity. Prototyped in 65-nm CMOS, the RX exhibits 5.7–7.2-dB NF and −11.4-dBm IP1 dB across 69–76.5-GHz range. It demonstrates that 38-dB rejection to spillover signals with offset frequency up to 3.6 MHz and power up to −10.4 dBm, while keeping the maximum NF degradation below 1–1.5 dB.