As essential building blocks of sequential digital circuits, optimizing the power consumption of flip-flops (FFs) can significantly reduce the total energy of digital systems. This paper proposes an ultra-low power 25-transistor (29-T with reset function) true single-phase clocked (TSPC) flip-flop by eliminating all redundant charges and discharges. Floating nodes are compensated by transistor-level optimization, which also enables a fully static and contention-free FF circuit design. The proposed FF is implemented in 55 nm CMOS technology. Post-layout simulation results demonstrate that at a supply voltage of 0.6 V and 10% data activity, the proposed circuit consumes only 0.153 fJ/cycle.
19 February 2025 in IEEE Transactions on Circuits and Systems II: Express Briefs
In-situ timing monitoring technology is widely used in adaptive voltage scaling (AVS) system to provide real-time timing information, enabling the elimination of timing margins preserved for PVT variations. However, the increased number of monitors and the short-path issue result in significant overhead. In this paper, a low-cost in-situ mechanism, intersection timing prediction and path activation detection (ITP-PAD), is proposed. It performs timing monitoring and path activation detection at the intersection of critical paths. Additionally, critical path replica (CPR) is introduced to support the ITP-PAD. A low-overhead 12-transistor (12-T) transition detector (TD) is designed to detect timing information and path activation, which operates stably at a sub-threshold voltage of 0.26 V. Furthermore, a method for selecting the minimum intersection points of critical paths has been proposed to reduce the number of insertion points.Implemented on an ARM Cortex-M0 microcontroller in 22nm technology, this approach reduces the insertion rate from 13.4% to 1.1%, with a total area overhead of only 1.3%. Measurements show that the chip’s power consumption is reduced by 36.9% to 51.1% over a voltage range of 0.42 V to 0.8 V.
28 October 2024 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
In this brief, a unified voltage frequency regulator (UVFR) system is designed to eliminate the voltage margin induced by process, voltage, and temperature (PVT) variations. The frequency is regulated with voltage by a universal logic line oscillator (ULLO), which can protect the system from timing violations. The length of the ULLO is self-calibrated by a ULL-based time-digital converter (ULL-TDC) and an in situ half-critical path timing detector, where the ULL is designed to track the critical path delay. A fully synthesizable digital low dropout (DLDO) is designed with the ULL-TDC and a proportional differential (PD) circuit for voltage regulation. The proposed system is implemented in an ARM Cortex-M0 microcontroller in 22 nm technology. Simulation results show that the ULL can accurately track the critical path delay with a maximum variation of 3% at 0.6 V and 11.5% at 0.45 V. The UVFR system consumes 13.2–112 uW of power overhead, and eliminates the voltage margin by 22.3%–28% while reducing the power consumption by 35%–42.3%.
1 January 2026 in IEEE Transactions on Circuits and Systems I: Regular Papers
This brief presents a cross-temperature continuous tracking system for minimum voltage point (CTC-MVPT) based on a universal delay chain (UDC) with multiple monitoring points. By leveraging the timing information provided by the timing margin indicator and timing error indicator, the CTC-MVPT system enables continuous cross-temperature tracking of the minimum voltage point (MVP), significantly reducing power. Meanwhile, the two-step adjustment technique greatly shortens the time required for voltage regulation. In addition, this work further optimizes the 0-to-1 and 1-to-0 transition deviations of the UDC. Measurement results in a 22-nm technology show that the proposed CTC-MVPT system achieves up to 17.7% power reduction over the traditional adaptive voltage scaling (AVS) system as the temperature increases from $0~^{\circ }$ C to $80~^{\circ }$ C. Therefore, it takes only 1.17ms to adjust the voltage from 0.55 to 0.41 V, representing a 47.8% reduction compared to the traditional scheme. Under the TT corner, the maximum deviation rate of the UDC is only 1.5%, and the maximum deviation between 0-to-1 and 1-to-0 transitions is merely 1.2%. Meanwhile, the system achieves a power gain of up to 55.3% with only a 0.26% area overhead for timing monitoring.