18 September 2024 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper describes an adaptive duo-binary four-level pulse amplitude modulation (Duo-PAM4) detector that significantly reduces the bit error rate (BER) of the conventional wireline transceivers under high insertion loss (IL) channels. The parallel maximum likelihood sequence detection (MLSD) combined with parallel feed-forward equalization (FFE) is proposed to generate, equalize, and detect Duo-PAM4 signals, thus reducing BER compared to conventional decision feedback equalizer (DFE) and slicers. The proposed reduced branch MLSD reduces power consumption compared to MLSD. An improved delay zero-forcing algorithm for Duo-PAM4 is proposed to achieve fast convergence of the FFE tap coefficients, reducing convergence time by up to 72.5% compared to conventional ZF algorithms for Duo-PAM4. Both the proposed and conventional detectors are implemented in a 28-nm CMOS process at 56 Gb/s and 38-dB insertion loss. The FFE $+$ MLSD and FFE $+$ RB-MLSD reduce the BER by two orders of magnitude compared to conventional FFE $+$ DFE $+$ slicer. The RB-MLSD reduces power consumption by 21.1% compared to conventional MLSD. The detector can be easily migrated to 112Gb/s or 224Gb/s transceivers.
5 November 2024 in IEEE Journal of Solid-State Circuits
This article presents a ring voltage-controlled oscillator (RVCO)-based pulse-injection-locked clock multiplier (ILCM) with a complementary-injection scheme, an adaptive pulsewidth adjustment, and a hybrid frequency tracking loop (FTL). The developed complementary-injection scheme introduces a combination of traditional narrow-pulse injection and wide-pulse injection to achieve phase error cancellation and enhance noise suppression. Based on the derived optimal pulsewidth principle, the proposed adaptive pulsewidth adjustment technique automatically maintains the optimal noise suppression across process, voltage, and temperature (PVT) variations. To achieve enhanced in-band noise suppression and extend the locking range, a hybrid FTL that incorporates a conventional phase-locked loop (PLL), a developed timing-adjusted loop (TAL), and an automatic locking mechanism (ALM) is designed. Fabricated in a 28-nm CMOS process, the ILCM occupies an active area of 0.133 mm2. The measurement results show that it achieves 43.9-fs rms jitter and −59.1-dBc spur level. The calculated figure-of-merit (FoM) is −255.5 dB, which outperforms other state-of-the-art works.
8 April 2025 in IEEE Journal of Solid-State Circuits
This article presents a 112-Gb/s four-level pulse amplitude modulation (PAM-4) analog-to-digital converter (ADC)-digital signal processing (DSP)-based retimer transceiver for reaching-distance extension. An injection-locked oscillator (ILO)-based jitter-filtering clocking scheme with relaxed bandwidth limitation and low-power consumption is proposed to obtain synchronous low-jitter clocks. The transmitter (TX) utilizes an internal feed-forward equalizer (FFE) cascaded with a forward-coupling pad driver to improve the output inter-symbol interference (ISI) jitter, and a timing-optimized 4:1 multiplexer (MUX) to reduce the serialization jitter. The receiver (RX) combines a flexible continuous-time linear equalizer (CTLE), a signal-to-noise ratio (SNR)-optimized ADC with 8-bit quantization, and a high-resolution digital equalization to further minimize the bit-error rate (BER). Fabricated in a 28-nm CMOS process, the prototype transceiver achieves 1E-12 raw BER at 112 Gb/s while compensating 31.2-dB channel loss. The clock network delivers a rms recovered clock jitter of 252 fs and a power efficiency of 0.56 pJ/bit, which outperforms other state-of-the-art works.
8 September 2025 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Compute Express Link (CXL) has emerged as a key enabler of memory disaggregation for future heterogeneous computing systems to expand memory on demand and improve resource utilization. However, CXL is still in its infancy stage and lacks commodity products on the market, thus necessitating a reliable system-level simulation tool for research and development. In this article, we propose CXL-DMSim (open-sourced at https://github.com/ferry-hhh/CXL-DMSim), an open-source full-system (FS) simulator to simulate CXL disaggregated memory systems with high fidelity at a gem5-comparable simulation speed. CXL-DMSim incorporates a flexible CXL memory expander model along with its associated device driver, and CXL protocol support with CXL.io and CXL.mem. It can operate in both the app-managed (AM) mode and the kernel-managed (KM) mode, with the latter using a dedicated NUMA-compatible mechanism. The simulator has been rigorously verified against a real hardware testbed with both FPGA- and ASIC-based CXL memory devices, which demonstrates the qualification of CXL-DMSim in simulating the characteristics of various CXL memory devices at an average simulation error of 3.4%. The experimental results using LMbench and STREAM benchmarks suggest that the CXL-FPGA memory exhibits a $\sim 2.88\times $ higher latency than local DDR, while the CXL-ASIC latency is $\sim 2.18\times $ ; CXL-FPGA achieves 45%–69% of local DDR memory bandwidth, whereas the number for CXL-ASIC is 82%–83%. The study also reveals that CXL memory can significantly enhance the performance of memory-intensive applications, improving by $23\times $ at most with limited local memory for Viper key–value database and approximately 60% in memory-bandwidth-sensitive scenarios such as MERCI. Moreover, the simulator’s observability and expandability are showcased with detailed case studies, highlighting its great potential for research on future CXL-interconnected hybrid memory pools.
22 January 2025 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
To solve the high bit error rate (BER) problem of conventional 56-Gb/s nonreturn-to-zero (NRZ) transceivers under high-insertion loss (IL) channels, this study proposes a high-speed adaptive duobinary (DB) digital detector based on the feed-forward equalizer (FFE) and the maximum likelihood sequence detector (MLSD). In this detector, adaptive FFE is combined with channel characteristics to generate DB signals and complete equalization, thus extending the transmission bandwidth and eye height and allowing a larger sampling phase offset. The parallel MLSD is used to complete the detection and decoding of DB signals to reduce the BER. An adaptive algorithm is proposed to avoid the long convergence time of the conventional zero-forcing (ZF) algorithm applied to the DB detector, so that it can be applied to various bit rates and IL channels. In this study, the verification of this DB detector is accomplished at 56 Gb/s. The platform based on a 56-Gb/s analog front-end chip (AFEC) and field-programmable gate array (FPGA) proves that the detector can work well in 12–56 Gb/s and multiple IL channels. The BER was less than 2e-8 at 56 Gb/s on −42-dB channel loss at 28 GHz. The structure can be well used for higher rate transceivers, such as 112 Gb/s.
20 December 2024 in IEEE Journal of Solid-State Circuits
This article presents an ultra-low-power D flip-flop (FF) named clock-load reduced FF (CRFF), which employs 23 transistors with only three clock load transistors to support fully static, contention-free, and redundancy-free operations in a wide-supply-voltage range. In particular, to reduce the clock load, logic replacement is performed on clock-insensitive transistors. Moreover, a novel conditional charge scheme is adopted in internal clock signal (CKB), with which functionally identical transistors are merged and redundant transistors are removed for dynamic power and hardware overhead reduction. Finally, the presented CRFF and prior works are prototyped with a 22-nm ULL CMOS technology. Compared to the state-of-the-art low power FFs, the CRFF achieves the minimal clock loads, and measurement results show that the total power of the CRFF with 10% data activity is reduced from 48.8% to 17.0% at 0.9 V and 39.9% to 13.6% at 0.4 V, respectively. As a result, the CRFF is a prospective FF cell for the Internet-of-Things (IoT) and wearable computing scenarios.