22 July 2024 in IEEE Access
As essential building blocks of sequential digital circuits, optimizing the power consumption of flip-flops (FFs) can significantly reduce the total energy of digital systems. This paper proposes an ultra-low power 25-transistor (29-T with reset function) true single-phase clocked (TSPC) flip-flop by eliminating all redundant charges and discharges. Floating nodes are compensated by transistor-level optimization, which also enables a fully static and contention-free FF circuit design. The proposed FF is implemented in 55 nm CMOS technology. Post-layout simulation results demonstrate that at a supply voltage of 0.6 V and 10% data activity, the proposed circuit consumes only 0.153 fJ/cycle.
19 February 2025 in IEEE Transactions on Circuits and Systems II: Express Briefs
In-situ timing monitoring technology is widely used in adaptive voltage scaling (AVS) system to provide real-time timing information, enabling the elimination of timing margins preserved for PVT variations. However, the increased number of monitors and the short-path issue result in significant overhead. In this paper, a low-cost in-situ mechanism, intersection timing prediction and path activation detection (ITP-PAD), is proposed. It performs timing monitoring and path activation detection at the intersection of critical paths. Additionally, critical path replica (CPR) is introduced to support the ITP-PAD. A low-overhead 12-transistor (12-T) transition detector (TD) is designed to detect timing information and path activation, which operates stably at a sub-threshold voltage of 0.26 V. Furthermore, a method for selecting the minimum intersection points of critical paths has been proposed to reduce the number of insertion points.Implemented on an ARM Cortex-M0 microcontroller in 22nm technology, this approach reduces the insertion rate from 13.4% to 1.1%, with a total area overhead of only 1.3%. Measurements show that the chip’s power consumption is reduced by 36.9% to 51.1% over a voltage range of 0.42 V to 0.8 V.
23 June 2025 in IEEE Transactions on Circuits and Systems II: Express Briefs
The offset voltage (VOS) of the Sense Amplifier (SA) is a critical parameter that affects sensing delay and energy consumption in SRAM. This brief proposes a Body-Biased Hybrid Sense Amplifier (BHSA) that effectively reduces the standard deviation (σOS) of VOS in low-voltage SRAM applications without need for the additional capacitors or auxiliary control circuits. Results of post-simulation demonstrate that the BHSA shows an average 44% reduction in σOS compared to the VLSA across the 0.3-0.9 V supply voltage range, with a specific reduction of 49.4% achieved at 0.3 V. Two 16 kb SRAMs with integrated BHSA and VLSA, respectively, were fabricated under the 22 nm FDSOI technology. Measurements indicates that the SRAM with integrated BHSA achieves a 48.2% reduction in bitline discharge delay and a 13.7% decrease in read power consumption at 0.45 V compared to traditional designs.
28 October 2024 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
In this brief, a unified voltage frequency regulator (UVFR) system is designed to eliminate the voltage margin induced by process, voltage, and temperature (PVT) variations. The frequency is regulated with voltage by a universal logic line oscillator (ULLO), which can protect the system from timing violations. The length of the ULLO is self-calibrated by a ULL-based time-digital converter (ULL-TDC) and an in situ half-critical path timing detector, where the ULL is designed to track the critical path delay. A fully synthesizable digital low dropout (DLDO) is designed with the ULL-TDC and a proportional differential (PD) circuit for voltage regulation. The proposed system is implemented in an ARM Cortex-M0 microcontroller in 22 nm technology. Simulation results show that the ULL can accurately track the critical path delay with a maximum variation of 3% at 0.6 V and 11.5% at 0.45 V. The UVFR system consumes 13.2–112 uW of power overhead, and eliminates the voltage margin by 22.3%–28% while reducing the power consumption by 35%–42.3%.
4 November 2025 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
This brief presents a low-power 9T static random access memory (SRAM) with enhanced read sensing margin and read performance. The read decoupled port of the proposed 9T SRAM cell achieves the enhanced sensing margin by mitigating the read bitline (RBL) leakage and improves the read performance through using one-transistor read path. The multithreshold voltage devices are used in SRAM cell for improving the leakage power and performance of SRAM. Additionally, an interleaved write wordline (WWL) structure is implemented to address the write half-select issue. The measurement results of the test chip fabricated in the 22-nm FDSOI technology demonstrate that the designed 9T SRAM achieves a minimum operation voltage of 0.31 V at 1.05 MHz and can operate at 60.5 MHz when the supply voltage is 0.5 V. The minimum active energy of 18.56 fJ/access-bit is obtained at 0.33 V. Furthermore, the designed SRAM exhibits a minimum leakage power of 0.11 pW/bitcell in the retention mode.
20 June 2025 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Unstructured pruning introduces significant sparsity in deep neural networks (DNNs), enhancing accelerator hardware efficiency. However, three critical challenges constrain performance gains: 1) complex fetching logic for nonzero (NZ) data pairs; 2) load imbalance across processing elements (PEs); and 3) PE stalls from write-back contention. This brief proposes an energy-efficient accelerator addressing these inefficiencies through three innovations. First, we propose a Cartesian-product output-row-stationary (CPORS) dataflow that inherently matches NZ data pairs by sequentially fetching compressed data. Second, a multilevel partial sum reduction (MLPR) strategy minimizes write-back traffic and converts random PE stalls into manageable load imbalance. Third, a kernel sorting and load scheduling (KSLS) mechanism resolves PE idle/stall and achieves PE array-level load balancing, attaining 76.6% average PE utilization across all sparsity levels. Implemented in 22-nmCMOS, the accelerator delivers $1.85\times $ speedup and $1.4\times $ energy efficiency over baseline and achieves 25.8 TOPS/W peak energy efficiency at 90% sparsity.