Large eddy simulation was used to analyze the time-variation flow field in order to study the microvibration of an aerostatic thrust bearing with a pocketed orifice-type restrictor. It was found that the vortex shedding caused air pressure fluctuation, which was directly related to the occurrence of the vibration of the bearing. Furthermore, the influence of bearing parameters on the vibration was studied through numerical analysis and experiments. The results indicated that large eddy simulation could predict the vibration by calculating the air pressure fluctuation inside the bearing. Moreover, the vibration could be reduced if the bearing was featured with a small orifice diameter, a large bearing diameter, a shallow air chamber or a low supply pressure.
Thermoelastohydrodynamic (TEHD) mixed lubrication characteristics of a step-combined rod seal under high-pressure and high-speed conditions are analyzed in this article. A novel TEHD mixed lubrication model for combined rod seals is innovatively established from the perspective of “seal-film-rod” system for the first time. Parameterized studies are conducted to evaluate the thermal effect on seal behavior with the comparison of isothermal elastohydrodynamic (EHD) lubrication analysis. Numerical results show that the interface friction heat is quite remarkable and mainly concentrated on the sealing lip, especially in high pressure and speed cases. With the increasing sealed pressure or rod speed, the temperature rise becomes more obvious and has a more significant impact on the sealing performance. The excessively rising temperature will even exceed the melting point of the sealing material, causing thermal damage.
The influence of NBR Shore hardness and PTFE elastic modulus on the sealing characteristics of step rod seals is analyzed in this paper based on the developed mixed elastohydrodynamic lubrication (EHL) model. The optimized selection studies of NBR Shore hardness and PTFE elastic modulus under different operating conditions are carried out based on the principle of minimizing net leakage and friction power loss. Results show that the Shore hardness of the NBR O-ring and, in particular, the elastic modulus of the PTFE ring has a significant effect on the sealing characteristics. Although the high values of these parameters result in high friction forces, they are beneficial for leakage control. To achieve both low leakage and low friction, it is recommended that high hardness and low modulus are selected for moderate-low pressure or high speed conditions, but low hardness and high modulus are selected for high pressure or low speed conditions.
13 September 2017 in Advances in Mechanical Engineering
The locally unsteady flow field near the orifice outlet of an aerostatic thrust bearing causes the gas pressure fluctuation on the bearing surface, which induces microvibration even if an invariable load acts on the bearing. In this article, flow field disturbance structure was designed for the air chamber of an aerostatic thrust bearing to change the microscopic flow field inside the bearing. Numerical calculation showed that flow field disturbance structure altered the gas flow characteristics in local flow field near the orifice outlet. Moreover, the fluctuating pressure on the bearing surface decreased obviously. Experiments demonstrated that the microvibration of the bearing with flow field disturbance structure was suppressed evidently. Furthermore, the influence of flow field disturbance structure parameters on the microvibration was analyzed experimentally.
23 June 2022 in Advances in Mechanical Engineering
Based on the theory of gas lubrication and elastic mechanics, a theoretical model of gas-elastic coupling lubrication of compliant foil face gas seal (CFFGS) is presented. The correlation between the film pressure and thickness of CFFGS and its effect on the flow field are investigated, and the differential effect of pressure conditions on the flow field and sealing performance is analyzed. Also explored the influence law of operating and structural parameters on sealing performance. Results show that CFFGS have stable and excellent leakage control performance, and the pressure forms has a differential effect on the coordination mechanism of film pressure-deformation-film thickness and the sealing performance. Moreover, compliant foil structure has a positive impact on the end-face adaptive capability and leakage control performance of the seal.
30 June 2021 in Advances in Mechanical Engineering
This paper proposes a novel gas journal bearing in which orifices are different in diameter and distribute unevenly. Finite Difference Method (FDM) combined with Linear Perturbation Method (LPM) is used to solve the unsteady-state Reynolds equation of the flow field in the bearing clearance. Moreover, four types of bearing structures are used to discuss the effects of orifices different in diameter and uneven distribution on the bearing performance. The results demonstrate that the new bearing has better static and dynamic performances compared with those of traditional bearing in which orifices are equal in diameter and distribute evenly. Moreover, thin gas film thickness, high supply pressure, and large eccentricity ratio are hopeful for improving load capacity of the new bearing. Furthermore, the stability of the novel bearing is improved if eccentricity ratio is 0.25–0.3.