Germanium tin (GeSn) alloys have emerged as pivotal materials for advanced optoelectronic applications owing to their tunable bandgaps and compatibility with silicon-based technologies. In this study, high quality GeSn multiple quantum wells (MQWs) with Sn concentrations of 7.0 ± 0.5% and 7.7 ± 0.5% were successfully grown on Ge(001) substrates using molecular beam epitaxy (MBE). The pseudomorphic growth of the MQWs and the high crystalline quality is evidenced by high-resolution x-ray diffraction. Cross-sectional transmission electron microscopy confirms a low defect density at the interfaces between GeSn wells and Ge barriers. Atomic probe topography shows the consumption of Sn atoms in the Ge barrier layer, preventing Sn segregation through the MQW structure. Atomic force microscopy reveals a smooth surface free of Sn droplets. Photoluminescence spectroscopy demonstrates optical emission at different wavelengths for varying Sn composition and QW thickness, confirming quantum confinement effects. These findings highlight the potential of MBE to produce high-quality GeSn/Ge MQWs with minimal defects, offering significant contribution for the next generation of optoelectronic devices.
We investigated the thermal stability and performance of AlGaN/AlN/GaN Hall-effect sensors under industry-relevant atmospheric conditions. The thermal stability and performance of Hall sensors are evaluated by monitoring Hall sensitivity, two-dimensional electron gas density, and Ohmic contact resistance during aging at 200 °C for up to 2800 h under atmospheric conditions. This was accomplished by characterizing AlGaN/AlN/GaN micro-Hall sensors, with and without contacts, and before and after being placed under different thermal aging times. Observed electrical performance was correlated with the micro-structural evolution of AlGaN/AlN/GaN Hall sensor heterostructures. Results indicate that the AlGaN/AlN/GaN Hall sensor provides stable performance for as long as 2800 h aging at 200 °C without any significant degradation of (i) Hall sensitivity, (ii) two-dimensional electron gas, and (iii) Ohmic contacts. However, there was a small change in sheet density and mobility, which is due to a decrease in polarization, resulting from local inhomogeneous strain relief at the barrier layer. During the early stage of thermal aging, a decrease in contact resistance was also observed and attributed to (i) out-diffusion of “Ga” at the vicinity of the contact interface, and (ii) a reduction in oxygen concentration and formation of Al–Ti intermediate alloy at the GaN/Ti interface, resulting in a reduced barrier and enhanced electron transport at the contacts. However, despite these small changes, results indicate that the AlGaN/AlN/GaN Hall sensor provides stable performance for as long as 2800 h thermal aging at 200 °C.
Germanium films were grown on c-plane sapphire with a 10 nm AlAs buffer layer using molecular beam epitaxy. The effects of Ge film thickness on the surface morphology and crystal structure were investigated using ex situ characterization techniques. The nucleation of Ge proceeds by forming (111) oriented three-dimensional islands with two rotational twin domains about the growth axis. The boundaries between the twin grains are the origin of the 0.2% strain and tilt grains. The transition to a single-grain orientation reduces the strain and results in a better-quality Ge buffer. Understanding the role of thickness on material quality during the Ge(111)/Al2O3(0001) epitaxy is vital for achieving device quality when using group IV material on the sapphire platform.
We apply an approach that uses x-ray diffraction (XRD) and dynamical scattering theory to determine the resulting elemental compositions of a Ge1−ySny/Ge1−xSnx superlattice after growth by simulating not just peak location but also the intensity modulation of the satellite peaks of the XRD profile. Analysis of the intensity modulation of the satellite peaks of the XRD profile of a Ge1−ySny/Ge1−xSnx superlattice determined the Sn composition, strain, and layer thickness, revealing a significant exchange of Sn in each layer. The superlattice structure was additionally confirmed by transmission electron microscopy, validating the XRD approach as applicable to superlattices more generally.