11 July 2017 in Semiconductor Science and Technology
5 October 2021 in Advanced Functional Materials
Harnessing ferroelectric negative capacitance in Hf0.5Zr0.5O2‐based thin films is promising for applications in nanoscale electronic devices with ultralow power dissipation, due to their ultimate scalability and semiconductor process compatibility. However, so far, it has been unclear if negative capacitance is an intrinsic material property of ferroelectric Hf0.5Zr0.5O2, or if it is an extrinsic effect caused by specific domain configurations and lateral domain wall motion as seen in perovskite ferroelectrics. Here, symmetric and asymmetric Hf0.5Zr0.5O2/Al2O3‐based ferroelectric/dielectric heterostructures are investigated to understand the relationship among depolarization, interfacial charge, domain formation, and negative capacitance. To achieve this, detailed electrical characterization is combined with structural data, analytical modeling, and numerical simulations. The findings suggest that negative capacitance in these ferroelectric/dielectric heterostructures is an intrinsic property of the Hf0.5Zr0.5O2 layer, which has important implications for potential applications. Furthermore, it is experimentally observed that the energy barrier for polarization switching in Hf0.5Zr0.5O2 is largely independent of the domain configuration and layer thickness, which confirms recent predictions by first principles calculations.
17 February 2020 in Nanoscale
The negative capacitance operation of a ferroelectric material is not only an intriguing materials science topic, but also a property with important technological applications in nanoscale electronic devices.
18 May 2020 in Applied Physics Letters
The temperature coefficient of resistance (TCR) of thin metal lines is often used for applications in thermometry, bolometers, or thermal accelerometers. However, metal TCR is much degraded in nanometer-thin films due to strong surface scattering, preventing their use as fast thermal sensors, which simultaneously require low thermal mass and large TCR. In contrast, here we show that the TCR of doped two-dimensional (2D) semiconductors is large (∼0.3% K−1 at 300 K in MoS2 and MoTe2) even at sub-nanometer thickness. This is larger than that of any metals with thicknesses up to ∼35 nm and larger than that of ∼95 nm thick Cu lines (0.25% K−1) at 300 K. At 100 K, the TCR of these 2D materials is doubled, ∼0.6% K−1. Comparison with detailed 2D transport models suggests that the TCR could be further enhanced (up to 0.45% K−1 at 300 K and ∼2.5% K−1 at 100 K) by reducing the density of Coulomb impurities and scattering centers. Such high TCR in atomically thin 2D semiconductors could lead to the design of fast thermal sensors.
6 September 2020 in Advanced Electronic Materials
The accurate extraction and the reliable, repeatable reduction of graphene–metal contact resistance (RC) are still open issues in graphene technology. Here, the importance of following clear protocols when extracting RC using the transfer length method (TLM) is demonstrated. The example of back‐gated graphene TLM structures with nickel contacts, a complementary metal oxide semiconductor compatible metal, is used here. The accurate extraction of RC is significantly affected by generally observable Dirac voltage shifts with increasing channel lengths in ambient conditions. RC is generally a function of the carrier density in graphene. Hence, the position of the Fermi level and the gate voltage impact the extraction of RC. Measurements in high vacuum, on the other hand, result in dependable extraction of RC as a function of gate voltage owing to minimal spread in Dirac voltages. The accurate measurement and extraction of important parameters like contact‐end resistance, transfer length, sheet resistance of graphene under the metal contact, and specific contact resistivity as a function of the back‐gate voltage is further assessed. The presented methodology has also been applied to devices with gold and copper contacts, with similar conclusions.
29 April 2022 in IEEE Journal of the Electron Devices Society
We here report a joint experimental and theoretical analysis of polarization switching in ferroelectric tunnel junctions. Our results show that the injection and trapping of charge into the ferroelectric-dielectric stack has a large influence on the polarization switching. Our results are relevant to the physical understanding and to the design of the devices, and for both memory and memristor applications.