Shiwei Liang

Shiwei Liang

Auto-generated profile, based on publicly available information

Shiwei Liang

Hunan University

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 July 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
Hengyu YuHengyu Yu
Hengyu Yu
SLShiwei Liang
Shiwei Liang
HLHangzhi Liu
Hangzhi Liu
WJWang Jun
Wang Jun
ZSZ. John Shen
Z. John Shen
It is highly desirable to monolithically integrate a high-performance freewheeling diode (FWD) in both Si and SiC power MOSFETs for power electronic applications. This is especially true for a SiC MOSFET since its inherent body diode has a very large turn-on knee voltage (~2.7 V). The purpose of this numerical study is to investigate a new 1200 V SiC MOSFET structure with an integrated heterojunction diode formed between n-type polysilicon and n-type SiC (termed HJD-MOSFET). The proposed HJD-MOSFET uses a mesa structure to accommodate the heterojunction FWD without sacrificing any active area while leaving the split-gate planar MOSFET cells in the trench. A p-shield region surrounding the heterojunction, along with the p-base of the MOS cells, shields high electric fields and maintains a high breakdown voltage. Three key HJD-MOSFET device parameters are identified and optimized in this article. The HJD-MOSFET offers a turn-on knee voltage of 0.5 V, roughly five times lower than the intrinsic SiC body diode or two times lower than a typical SiC Schottky barrier diode due to the low barrier height of the n/n heterojunction (~0.68 eV). Finally, the gate charge of HJD-MOSFET is reduced by 42% compared with conventional MOSFET since the poly-Si gate electrode is significantly reduced to accommodate the heterojunction FWD.

9 January 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
SLShiwei Liang
Shiwei Liang
YYYu Yang
Yu Yang
Lei ShuLei Shu
Lei Shu
ZWZiyuan Wu
Ziyuan Wu
BCBingru Chen
Bingru Chen
WJWang Jun
Wang Jun
In this article, we proposed a comprehensive model for predicting the degradation of SiC MOSFETs after gamma-ray irradiation. It is experimentally founded that SiC MOSFETs exhibit different degradation behaviors under gate bias (i.e., ${V}_{\text {GS}} =15$ V and ${V}_{\text {DS}} $ = 0 V) and drain bias (i.e., ${V}_{\text {GS}} $ = 0 V and ${V}_{\text {DS}} =400$ V) in terms of threshold voltage ( ${V}_{\text {TH}}$ ) and ON-resistance ( ${R}_{\text {ds}, \text{ON}}$ ). TCAD simulation shows that gate bias causes a high electric field in gate oxide above the MOS channel region, while drain bias generates relatively lower electric field in gate oxide around near-channel region. The differences in electric field under gate bias and drain bias lead to different hole yields and charge accumulation in gate oxide, which is the underlying physical mechanism for their different degradation behaviors. ${V}_{\text {TH}}$ is chosen as the parameter to quantify the accumulated charges in gate oxide and further predict irradiation-induced degradation. The relationship between the variation of threshold voltage ( ${\Delta} {V}_{\text {TH}}$ ) and the total ionizing doses (TIDs) under both gate and drain bias is formulated and validated. Comparison among measured data, TCAD simulation, and model prediction shows that the maximum prediction error is lower than 0.08 V, which proves the rationale and accuracy of the proposed degradation model. In addition, the two submodels for gate bias and drain bias are unified as one according to the time dependence effect (TDE) for TID irradiation. The proposed model could be useful to predict the degradation and/or lifetime of SiC MOSFETs in irradiation environments.

25 July 2022 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
Hengyu YuHengyu Yu
Hengyu Yu
WJWang Jun
Wang Jun
GDGaoqiang Deng
Gaoqiang Deng
SLShiwei Liang
Shiwei Liang
HLHangzhi Liu
Hangzhi Liu
ZSZheng John John Shen
Zheng John John Shen
Monolithic integration of junction barrier-controlled Schottky (JBS) diode with SiC MOSFET (termed JMOS) offers unique advantages. However, the short-circuit (SC) ruggedness issue stands in the way of the development of the conventional JMOS. The purpose of this numerical study is to investigate a new 4H-SiC JMOS with a self-pinching (SP) structure formed in the JFET region (termed SP-JMOS). The SP structure features that an N-type current spread layer is sandwiched between the P+ layer and the buried P-shield layer, forming a lateral JFET channel. In the forward conduction state, the lateral JFET channel self-pinches off and clamps the potential, thus limiting the saturation current of the device. In the blocking state, both the P+ layer and the buried P-shield layer collaboratively shield the Schottky contact and the SiC/SiO 2 interface from a high electric field for long-term reliable operation. Numerical simulation results show that the proposed SP-JMOS not only withstands a roughly $2.6\times $ longer SC withstanding time than that of the conventional JMOS, but also shows an ultralow oxide electric field in the SP-JMOS.

29 November 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
Hengyu YuHengyu Yu
Hengyu Yu
WJWang Jun
Wang Jun
JZJinyi Zhang
Jinyi Zhang
SLShiwei Liang
Shiwei Liang
ZSZheng John John Shen
Zheng John John Shen
The 1.2-kV-rated 4H-SiC planar split-gate (SG) MOSFET embedding source field plate incorporated between separated gates (termed SFP-SG-MOSFET) is proposed and demonstrated. The utilization of the embedding source field plate in conventional SG-MOSFET (Conv-SG-MOSFETs) serves to alleviate the adverse effects of electric field crowding. It also maintains the minimum reverse transfer capacitance ( $\textit{C}_{\text{rss}}\text{)}$ . As a result, the high-frequency figure-of-merit (HF-FOM) and switching efficiency of the proposed SFP-SG MOSFET are improved compared to those of a conventional planar-gate MOSFET (Conv-PG-MOSFET) while maintaining the same blocking voltage rating. The experimental results demonstrate that $\textit{C}_{\text{rss}}$ of the fabricated devices is reduced by 80% and 53% at $\textit{V}_{\text{ds}}$ $=$ 0 V and $\textit{V}_{\text{ds}}$ $=$ 800 V, respectively. Thus, the SFP-SG-MOSFET exhibits HF-FOMs $<$ $\textit{R}_{\text{ON}}$ $\times$ $\textit{C}_{\text{rss}}$ $>$ 4.9 times lower at $\textit{V}_{\text{ds}}$ $=$ 0 V and 2.0 times lower at $\textit{V}_{\text{ds}}$ $=$ 800 V. Furthermore, the switching loss of the SFP-SG-MOSFET is reduced by 25%. This makes it possible for the proposed devices to handle a higher power density.

17 May 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
SLShiwei Liang
Shiwei Liang
Lei ShuLei Shu
Lei Shu
WJWang Jun
Wang Jun
GDGaoqiang Deng
Gaoqiang Deng
Liang WangLiang Wang
Liang Wang
SiC MOSFETs are increasingly gaining attentions from aerospace industry due to their superior radiation tolerance and low loss. The influences of total ionizing dose (TID) radiation on static characteristics of SiC MOSFETs have been extensively studied in recent years. However, the influence on their switching behaviors has seldom been comprehensively studied yet. In this article, we comparatively studied the switching characteristics of SiC MOSFETs pre and after $\gamma $ -ray radiation. It is observed that their turn-on time and turn-on loss ( $\textit{E}_{\biosub{ON}}\text{)}$ decrease by 12.78% and 9.19%, and turn-off time and turn-off loss ( $\textit{E}_{\biosub{OFF}}\text{)}$ increase by 15.92% and 20.79%, respectively, after 500-krad radiation under gate bias ( $\textit{V}_{\text{GS}}$ $=$ 15 V and $\textit{V}_{\text{DS}}$ $=$ 0 V), while they are 9.91%, 13.31%, 14.87%, and 28.51% with the same tendency after 500-krad radiation under drain bias ( $\textit{V}_{\text{GS}}$ $=$ 0 V and $\textit{V}_{\text{DS}}$ $=$ 400 V). The compensation effect of $\Delta \textit{E}_{\biosub{ON}}$ and $\Delta \textit{E}_{\biosub{OFF}}$ is beneficial to power electronic systems from thermal budget point of view. Further investigation indicates that the negative shift of threshold voltage and increment in parasitic capacitances, both of which are induced by accumulation of positive charges in gate oxide, should be responsible for dynamic degradation of SiC MOSFETs after $\gamma $ -ray radiation. Besides, TCAD simulation reveals that the differences in electric field magnitude and distribution under $\textit{V}_{\text{GS}}$ and $\textit{V}_{\text{DS}}$ bias could be the physical mechanism for their different radiation responses. These results provide fundamental knowledge to predict radiation reliability of SiC MOSFETs through switching parameters.

20 September 2018 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
WJWang Jun
Wang Jun
SLShiwei Liang
Shiwei Liang
LDLinfeng Deng
Linfeng Deng
XYXin Yin
Xin Yin
ZSZ. John Shen
Z. John Shen
The SiC Bipolar Junction Transistor (BJT) offers an attractive alternative to the more popular SiC MOSFET. It is important to develop an accurate SPICE model for the SiC BJT to enable its use in power electronics applications. The current gain of a SiC BJT may degrade considerably at high current level and/or high temperature largely due to the surface recombination effect. In this paper, an improved SPICE behavioral model that accurately accounts for current gain dependent on collector current and junction temperature is proposed for the SiC BJT. We extend the conventional Gummel-Poon model in this work to include this important physical effect by adding a diode between the external base and emitter terminals of the BJT. A two-step model parameter extraction method is developed. We first extract the basic Gummel-Poon model parameters from low-current measurement data, and then extract the new surface recombination model parameters by observing the difference between the measured high-level base current and the standard Gummel-Poon model prediction. The simulated static and switching characteristics of the new SiC BJT model match with the measured data very well. Finally, the new SPICE model is used in the performance assessment of a proportional base driver technique embedded in a 3.6kW boost converter, demonstrating its validity in helping optimum design of power electronics applications based on SiC BJTs.