Aurelien Mazzamurro

Aurelien Mazzamurro

Auto-generated profile, based on publicly available information

Aurelien Mazzamurro

IEMN UMR 8520 Univ. Lille CNRS Centrale Lille ISEN Univ. Valenciennes LIA LICS/LEMAC F-59000 Lille France

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 March 2021 in IEEE Sensors Journal
Verified
Journal Article
Closed access
HHHamida Hallil
Hamida Hallil
CDCorinne Dejous
Corinne Dejous
SHSami Hage-Ali
Sami Hage-Ali
Omar ElmazriaOmar Elmazria
Omar Elmazria
Jerome RossignolJerome Rossignol
Jerome Rossignol
ELElie Lefeuvre
Elie Lefeuvre
Sensors based on "resonance phenomenon" span a broad spectrum of important current applications including detection of biological and chemical agents, and measurements of physical quantities. Resonance phenomena occur with all types of waves: electromagnetic, optic, and acoustic. This review reports about the most recent advances in the design and applications of resonant "passive" sensors, i.e. resonant sensors able to operate with a distant power source and/or able to communicate with a distant transceiver. The sensors considered in this review include acoustic, magnetoelastic, and electromagnetic transducers. They are presented through their relevant technological aspects and through they major advantages which include their integrability within embedded systems and/or systems requiring energy autonomy. Furthermore, the use of these resonant sensors is illustrated in a large variety of applications, ranging from environmental monitoring, structural health monitoring, food packaging monitoring, wearable or implanted sensors for the monitoring of physiological parameters in healthcare related applications, to IoT and future industry monitoring applications.

1 April 2020 in Physical Review Applied
Verified
Journal Article
Closed access
PDF file
AMAurélien Mazzamurro
Aurélien Mazzamurro
YDYannick Dusch
Yannick Dusch
PPPhilippe Pernod
Philippe Pernod
OMOlivier Bou Matar
Olivier Bou Matar
AAAhmed Addad
Ahmed Addad
NTNicolas Tiercelin
Nicolas Tiercelin
In this work, we propose a theoretical and experimental investigation of the interaction of guided pure shear-horizontal (SH) wave within a uniaxial multilayered TbCo2/FeCo thin film deposited on ST-X90∘-cut quartz in a delay-line configuration. We evaluate theoretically the evolution of phase velocity as a function of magnetic field and experimentally the variation of S21 transmission coefficient (amplitude and phase). An equivalent piezomagnetic model based on pure magnetoelastic coupling is used (developed to allow us) to calculate the elastic stiffness constants of the multilayer as a function of the bias magnetic field. The model is also implemented for the calculation of acoustic waves’ dispersion curves. We show that the evolution of the phase velocity with respect to the bias magnetic field is dominated by the C66 elastic stiffness constant as expected for the case of shear-horizontal surface acoustic wave. In the fabricated device, both fundamental and third-harmonic shear mode are excited at 410 MHz and 1.2 GHz, respectively. For both modes, the theoretical and experimental results are in agreement. At 1.2 GHz, the guiding of the acoustic wave in the ferromagnetic thin film enhances the sensitivity to the bias magnetic field with a maximum phase-velocity shift close to 2.5% and an attenuation reaching 500 dB/cm, for a sensitivity as high as 250 ppm/Oe, which is better than what has been reported in the literature so far. We also report that, from a specific ratio between the thin-film thickness and the acoustic wavelength, the bias magnetic field can induce a breaking of the acoustic wave polarization, leading to an acoustic mode conversion.

30 November 2023 in IEEE Sensors Journal
Verified
Journal Article
Closed access
OMOTHMANE MARBOUH
OTHMANE MARBOUH
GBGhizlane Boussatour
Ghizlane Boussatour
YDYannick Dusch
Yannick Dusch
AMAurélien Mazzamurro
Aurélien Mazzamurro
DLDaniel LALOY
Daniel LALOY
ATAbdelkrim Talbi
Abdelkrim Talbi
The load cell is an indispensable component of many engineering machinery and industrial automation for measuring and sensing force and torque. In this paper, we propose to investigate a force sensor design combining Surface Acoustic Wave (SAW) strain sensor with binocular load cell structure. For this purpose, we use a binocular test body instrumented with both resistive strain gauge as a reference and SAW strain sensor. The system enables the generation of extremely localized and accurate positive and negative strains. Static and dynamic measurements are performed using calibrated weights and a shock hammer respectively. For SAW sensor, a one-port resonator with frequency operation in the range of 410MHz was fabricated and mounted on the test body. For electronic conditioning, we use a low-cost RF electronic conditioning based on radar architecture using the integrated circuit AD8302. The system enables the measurement of S 11 reflection coefficient (module and phase) with sensitivity and noise spectral density of (29 mV/dB, 250 nV/√Hz) and (10 mV/°, 83 nV/√Hz) respectively. The SAW sensor mounted on body proof was successfully tested in static and dynamic mode using this electronic architecture. The results show good linearity, sensitivity values of 0.023 mV/ppm and 0.09 mV/ppm were obtained for amplitude and phase measurements respectively. The dynamic response was performed using a shock hammer and a comparison with conventional strain gauge shows a good agreement.

6 November 2023 in IEEE Sensors Letters
Verified
Journal Article
Closed access
OMOTHMANE MARBOUH
OTHMANE MARBOUH
AMAurelien Mazzamurro
Aurelien Mazzamurro
OMOlivier Bou Matar
Olivier Bou Matar
NTNicolas Tiercelin
Nicolas Tiercelin
YDYannick Dusch
Yannick Dusch
ATAbdelkrim Talbi
Abdelkrim Talbi
In this study, we conduct a comprehensive investigation to enhance the performance of shear surface acoustic wave (SAW) magnetic sensors. We explore the interaction between SAW and a nickel film deposited on ST-cut quartz in a delay line configuration. The nickel film, measuring 2 mm in width and 100 nm in thickness, undergoes vacuum annealing at 500 C to induce magnetic anisotropy through the anisotropic thermal properties of ST-cut quartz. Our research combines theoretical and experimental approaches to evaluate the S21 phase shift in response to an applied magnetic field. The results demonstrate a remarkable agreement between theoretical predictions and experimental data. To interpret the sensor's response behavior, we introduce a custom piezomagnetic model. Notably, we observe a phase shift difference between minimum and maximum of approximately 30 for a propagation path of 2 mm . We further investigate the impact of incorporating an SiO2 layer on top of the magnetic thin film. This addition doubles the phase shift difference, as shear SAWs become more confined near the surface or entirely waveguided within the SiO2 layer. Additionally, we explore an innovative approach for modifying the sensor's response behavior by manipulating the magnetic thin film's anisotropy. These findings contribute to the advancement of SAW magnetic sensor technology, offering enhanced sensitivity and performance through the integration of magnetic thin films and SiO2 layers.

12 December 2023 in IEEE Sensors Letters
Verified
Journal Article
Closed access
OMOTHMANE MARBOUH
OTHMANE MARBOUH
AMAurelien Mazzamurro
Aurelien Mazzamurro
YDYannick Dusch
Yannick Dusch
OMOlivier Bou Matar
Olivier Bou Matar
NTNicolas Tiercelin
Nicolas Tiercelin
ATAbdelkrim Talbi
Abdelkrim Talbi
Surface Acoustic Wave (SAW) sensors represent a prominent technological avenue for quantifying mechanical stress-induced deformations. Nonetheless, the integration of these Micro-Electro-Mechanical Systems (MEMS) sensors remains an complex challenge. Consequently, a common approach within a multitude of research involves the utilization of a adhesive formulation. However, this mode of integration continues to exhibit deficiencies in terms of measurement repeatability, particularly when confronted with harsh environments characterized by pronounced mechanical and thermal stresses. In this context, the utilization of backside reflow soldering for SAW sensor integration stands as a notably dependable alternative to epoxy bonding. In this article, we present the results of our feasibility study concerning the reflow soldering of a SAW sensor onto a binocular copper load cell to measure static strains and a ferromagnetic steel sheet to measure dynamic strains resulting from magnetostriction. To use reflow soldering, a nickel/copper electrodeposition on the ferromagnetic steel sheet was carried out, demonstrating the potential to apply this technique to various materials. The results have indicated that reflow soldering enhances the transmission of static and dynamic mechanical stresses to the SAW sensor, exhibiting a coefficient threefold greater than that achieved through simple adhesive bonding. Furthermore, this integration technique demonstrated a long-term stability of the measurement.

17 January 2019 in Proceedings
Verified
Conference Paper
Open access
PDF file
AAbdelhatiif El fellahi
Abdelhatiif El fellahi
AMAurélien Mazzamurro
Aurélien Mazzamurro
JGJean Claude Gerbedoen
Jean Claude Gerbedoen
YDYannick Dusch
Yannick Dusch
OMOlivier Bou Matar
Olivier Bou Matar
NTNicolas Tiercelin
Nicolas Tiercelin
A miniaturized coplanar waveguide (CPW) on a Y-cut LiNbO3 substrate operating in Radio Frequency region (RF) is proposed for studying of magnetostrictive multi-layered structure. The structure is composed of a 14 × [TbCo2 (3.7 nm)/FeCo (4 nm)] nanostructured multi-layer. Using microtechnology process, the miniaturized CPW has been designed with a 50 µm wide signal line in the frequency range from 6 MHz to 6 GHz. Electromagnetic simulations based on ®Ansys/HFSS demonstrate insertion losses less than 2 dB and show that the magnetic field is more confined in the nanostructured multi-layer placed on top of the micro-sized CPW. By using Vectorial Network Analyzer (VNA) the Ferromagnetic Resonance (FMR) is investigated from the reflection (Sii) or transmission (Sij) coefficients of scattering parameters. An inversion model is finally used to extract the complex permeability spectrum of the thin-film in a large frequency range.