6 June 2022 in IEEE Transactions on Electron Devices
Complementary FET (CFET) is a promising candidate for CMOS scaling beyond 3-nm technology node. In this article, a novel hybrid channel CFET (HC-CFET) is proposed, which takes advantage of the vertical structure and simultaneously co-optimizes the preferred high-electron/hole-mobility surface of NMOS/PMOS on one substrate. The flexible combination of nanowires (NWs) and nanosheets (NSs) in the HC-CFET allows NMOS to have (100) channel surface orientation, while PMOS has (110) channel surface orientation without increasing the footprint of CFET pillars. Parasitic-aware device to circuit design-technology co-optimization (DTCO) analysis of the HC-CFET is performed based on advanced TCAD simulation of the device and comprehensive HSPICE simulation with TCAD-calibrated compact model. At the device level, the optimization of the channel surface orientation in the HC-CFET enables both NMOS and PMOS to obtain a current gain of more than 20%. By adjusting the wafer orientation and stacking type, HC-CFET exhibits higher frequency gain and comparable energy consumption in ring oscillator (RO) than multiscreen CFET (MS-CFET) and multibridge CFET (MB-CFET). After fully considering the impact of the stacking type on the static random access memory (SRAM) cell structure, (110) wafer together with n-NW on top of p-NS stack is the preferable approach to manufacture HC-CFET, which helps balance the speed, stability, and area of the SRAM cell.
15 December 2021 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Layout hotspot detection is one of the most important issues for the reliability enhancement of integrated circuits. Machine learning-based hotspot detectors have shown their advantages of efficiency and generalization compared with computationally intensive lithography process simulation. However, most machine learning-based hotspot detectors only accept layout clips of fixed size as input with the potential defect whose location is restricted at the center of each clip. Therefore, they cannot be used directly for multiple hotspots detection in a large area, which occurs frequently in real design cases. In this article, we build a new end-to-end hotspot detector based on a fully convolutional network, which has the flexibility of detecting a various number of hotspots in a layout of any size at one time. Moreover, we also develop a transfer learning scheme matching our proposed detector network, which can reduce the requirement of sample number when setting up a new model for a more advanced technology node. The experimental results demonstrate our proposed hotspot detector outstanding among state-of-the-art works and the transfer learning scheme is effective.
9 March 2022 in IEEE Transactions on Electron Devices
In this work, a p-type high- ${k}$ metal gate (HKMG) with 3-nm interfacial Al 2 O 3 doping HfO 2 laminated dielectric is presented to achieve the required gate electrode effective work function (EWF). Through the ex-situ interfacial doping strategy with various Al 2 O 3 thickness, the electrical and interface characteristics of p-type HKMG MOSCAP are investigated. The results show that these parameters are strongly dependent on the thickness of the Al 2 O 3 . By increasing the Al 2 O 3 thickness, the flat-band voltage ( ${V}_{\text {FB}}$ ) positive shift is elevated by 360 mV, and the trap/detrap electrons density ( ${N}_{\text {ot}}$ ) is significantly suppressed by an order of magnitude. In addition, the interface charge density ( ${N}_{\text {SS}}$ ) is significantly reduced, and interface trap density ( ${D}_{\text {it}}$ ), time-dependent dielectric breakdown (TDDB), and positive bias stress (PBS) is obviously improved. Finally, EWF modulation was increased from 4.976 to 5.206 eV (over the valence band edge of 5.17 eV). The results reveal that it is possible to tailor dielectric and electrical properties of high- ${k}$ layers by adding a proper amount of interfacial Al 2 O 3 doping into HfO 2 , meeting the criteria required for gate electrode p-type EWF. These results and discussion provide an effective method for the integration of the HKMG stack in the MOSFETs and also useful for design of CMOS integration.