15 November 2017 in IEEE Transactions on Electromagnetic Compatibility
The power distribution network (PDN) of a high-speed printed circuit board requires a high-performance power supply. The total equivalent inductance above the top ground plane is an important part of PDN design and is regarded as L above . In this paper, an inductance library for different structures of capacitor connections and capacitor sizes has been built, which is essential for PDN design. computer simulation technology (CST) and partial element equivalent circuit method are applied to obtain the shorted pattern design curves at various design data. The shorted pattern design curve means the total equivalent inductance varies with the distance between pad and ground plane. In addition, an approximate shorted model is established for a decoupling capacitor-mounted model, which will be convenient for us to get the inductance of L above . In this paper, the design curve provides an intuitive guideline in designing PDN and facilitates the industry to choose what they want with consideration of the inductance, space, via numbers, etc.
29 November 2016 in IEEE Transactions on Antennas and Propagation
Due to the static magnetic field, the conductivity for graphene becomes a dispersive and anisotropic tensor, which complicates most modeling methodologies. In this communication, a novel equivalent circuit model is proposed for graphene with the magnetostatic bias based on the electric field integral equation. To characterize the anisotropic property of the biased graphene, the resistive part of the unit circuit is replaced by a resistor in series with current-controlled voltage sources (CCVSs). The CCVSs account for the off-diagonal parts of the surface conductivity tensor for the magnetized graphene. This proposed method is benchmarked with numerical examples. This communication also provides a new equivalent circuit model to deal with anisotropic materials.
1 October 2015 in Fusion Engineering and Design
24 May 2021 in IEEE Photonics Technology Letters
In this letter, the mixed finite element method (Mixed FEM) incorporating with the surface current boundary condition (SCBC) is firstly proposed to perform eigenmode numerical simulations of graphene-based plasmonic waveguides. The SCBC which is based on modeling graphene as the zero-thickness conductive sheet, is introduced to reduce the extremely fine discretization of graphene at the atomic scale. Thus, enormous unknowns and computational resources are significantly decreased in the proposed new method. Numerical examples of some typical graphene-based waveguides are presented to verify numerical accuracy and computational efficiency of the new method.