Innovative technology approaches have been increasingly investigated for the last two decades aiming at human-being long-term monitoring. However, current solutions suffer from critical limitations. In this paper, a complete system for contactless health-monitoring in home environment is presented. For the first time, radar, wireless communications, and data processing techniques are combined, enabling contactless fall detection and tagless localization. Practical limitations are considered and properly dealt with. Experimental tests, conducted with human volunteers in a realistic room setting, demonstrate an adequate detection of the target's absolute distance and a success rate of 94.3% in distinguishing fall events from normal movements. The volunteers were free to move about the whole room with no constraints in their movements.
Telehealth systems and applications are extensively investigated nowadays to enhance the quality-of-care and, in particular, to detect emergency situations and to monitor the well-being of elderly people, allowing them to stay at home independently as long as possible. In this paper, an embedded telehealth system for continuous, automatic, and remote monitoring of real-time fall emergencies is presented and discussed. The system, consisting of a radar sensor and base station, represents a cost-effective and efficient healthcare solution. The implementation of the fall detection data processing technique, based on the least-square support vector machines, through a digital signal processor and the management of the communication between radar sensor and base station are detailed. Experimental tests, for a total of 65 mimicked fall incidents, recorded with 16 human subjects (14 men and two women) that have been monitored for 320 min, have been used to validate the proposed system under real circumstances. The subjects’ weight is between 55 and 90 kg with heights between 1.65 and 1.82 m, while their age is between 25 and 39 years. The experimental results have shown a sensitivity to detect the fall events in real time of 100% without reporting false positives. The tests have been performed in an area where the radar's operation was not limited by practical situations, namely, signal power, coverage of the antennas, and presence of obstacles between the subject and the antennas.
This article provides a review of semiconductor based ionising radiation sensors to measure accumulated dose and detect individual strikes of ionising particles. The measurement of ionising radiation (-ray, X-ray, high energy UV-ray and heavy ions, etc.) is essential in several critical reliability applications such as medical, aviation, space missions and high energy physics experiments considering safety and quality assurance. In the last few decades, numerous techniques based on semiconductor devices such as diodes, metal-oxide-semiconductor field-effect transistors (MOSFETs) and solid-state photomultipliers (SSPMs), etc., have been reported to estimate the absorbed dose of radiation with sensitivity varying by several orders of magnitude from Gy to MGy. In addition, the mitigation of soft errors in integrated circuits essentially requires detection of charged particle induced transients and digital bit-flips in storage elements. Depending on the particle energies, flux and the application requirements, several sensing solutions such as diodes, static random access memory (SRAM) and NAND flash, etc., are reported in the literature. This article goes through the evolution of radiation dosimeters and particle detectors implemented using semiconductor technologies and summarises the features with emphasis on their underlying principles and applications. In addition, this article performs a comparison of the different methodologies while mentioning their advantages and limitations.
7 August 2002 in IEEE Journal of Solid-State Circuits
In recent years, much research has been carried out on the possibility of using pure CMOS, rather than bipolar or BiCMOS technologies, for radio-frequency (RF) applications. An example of such an application is the Global Positioning System (GPS). One of the important bottlenecks to make the transition to pure CMOS is the immunity of the circuits against electrostatic discharge (ESD). This paper shows that it is possible to design a low-noise amplifier (LNA) with very good RF performance and sufficient ESD immunity by carefully co-designing both the LNA and ESD protection. This is demonstrated with a 0.8-dB noise figure LNA with an ESD protection of -1.4-0.6 kV human body model (HBM) with a power consumption of 9 mW. The circuit was designed as a standalone LNA for a 1.2276-GHz GPS receiver. It is implemented in a standard 0.25-/spl mu/m 4M1P CMOS process.
A new ESD protection methodology for high-frequency CMOS LNAs is introduced. An on-chip inductor is employed to drain off the hazardous ESD charge while tuning out the harmful parasitic input capacitance. A 5.2 GHz LNA has been designed, attaining high RF performance while providing a high level of ESD protection.