7 March 2025 in IEEE Sensors Journal
Capacitive sensing circuit is one of the key technologies in the development of a series of deep space exploration instruments, such as inertial sensors in space gravitational wave detection mission and seismometers in planetary / lunar exploration programs. Space exploration missions require high precision, low-power and high-reliable capacitive sensing circuits. Although the traditional bridge-based capacitive detection circuits widely used currently behave high accuracy, they have a relatively complex structure and higher power consumption. In this paper, a charge-discharge differential capacitive sensing circuit based on high stability square-wave generator, ring-diode switch and low noise trans-impedance amplifier is proposed and investigated systematically. The system noise model is presented based on detailed analysis and measurement of the main noise sources. Low noise design optimization scheme is proposed based on the noise model. A prototype circuit is developed and tested. The sensitivities with several different excitation frequencies are calibrated. The measured noise is compared to the theoretical model and demonstrates a good consistency. The experimental results show that the noise equivalent capacitance resolution of this circuit reaches 0.24 aF/Hz1/2 at 0.1 Hz and 0.028 aF/Hz1/2 at 100 Hz. Benefitting from its simple structure and high measurement accuracy, it is highly suitable for space exploration instruments and other applications.
16 April 2025 in Measurement
30 October 2025 in Measurement
1 January 2026 in IEEE Transactions on Instrumentation and Measurement
3 March 2026 in IEEE Transactions on Circuits and Systems II: Express Briefs
Charge-discharge capacitive sensing circuit has the advantages of high precision, simple structure and low power consumption. However, its low-frequency noise performance is limited by the fluctuations of the forward voltage of the switching diodes in the ring-diode circuit. In this brief, a chopper stabilization circuit is designed by periodically interchanging the positions of the four diodes to suppress the low-frequency noise introduced by the ring-diode circuit. The principle is analyzed and the noise performance is validated. Experimental results show that this method can significantly suppress the low-frequency noise of the sensing circuit. At a carrier frequency of 2.5 MHz, the equivalent capacitance resolution of the sensing circuit at 0.01 Hz is improved from about 1.1 aF/Hz ${}^{\mathrm {1/2}}$ to about 0.12 aF/Hz ${}^{\mathrm {1/2}}$ . The optimized sensing circuit can promote the application in fields with high requirements for low-frequency performance, such as space inertial sensors and planetary seismometers.