The TianQin program is an independently proposed space-borne detection initiative from China. The inertial sensor, as a crucial component, is susceptible to disturbances from temperature fluctuations, the impact of which on acceleration measurements remains elusive. Therefore, a comprehensive analysis on the influence of temperature disturbance is necessary to avoid errors in acceleration measurement. In this study, we proposed a complete scheme for calculating the level of acceleration noise. Based on the traditional temperature control scheme of using a heat pipe, we developed a systematic heat transfer simulation model to obtain the temperature signals. These signals can then be converted into the frequency domain and used to calculate the acceleration noise level within the target bandwidth. Our results indicate that, with a temperature control of 0.13 K/Hz1/2@1 mHz, the largest contributions to acceleration noise come from the outgassing effect, radiometer effect, and radiative pressure effect, in descending order. The total noise peak is at 1 mHz, which is more than three orders of magnitude higher than the TianQin target of . This study provides new avenues for evaluating measurement errors and solutions for the TianQin program.
A cone-jet emits charged droplets and ions with an electric current. When the liquid is heated, we observe a sharp increase in current (over 200% current increase with a 20 °C temperature rise) for conductive cone-jets, indicating that ion evaporation, a temperature-sensitive process, can contribute significantly to the emission, especially under strong self-heating. We developed an analytical model that incorporates both self-heating and ion evaporation to predict the current as a function of temperature, liquid properties, and flow rate. The model agrees well with measurement. Calculations suggest that ion evaporation takes >70% of total current at high temperatures.