Nan Wu

Nan Wu

Auto-generated profile, based on publicly available information

Nan Wu

Tsinghua University

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 July 2025 in IEEE Microwave and Wireless Technology Letters
Verified
Journal Article
Closed access
WHWenqiang Huang
Wenqiang Huang
QLQichun Liu
Qichun Liu
YLYaoyu Li
Yaoyu Li
SZSiqi Zhang
Siqi Zhang
NWNan Wu
Nan Wu
YGYanshu Guo
Yanshu Guo
This article presents a 6–8-GHz fractional-N charge-pump-phase-lock-loop (CP-PLL) working down to 3.5 K temperature in 28-nm bulk CMOS for quantum computing. To accommodate the wide operating temperature and frequency tuning ranges, a self-biased current source calibration method is introduced to maintain a constant charge pump bias current, thereby ensuring adequate phase margin and minimizing phase noise. An automatic flicker noise calibration technique is also employed to mitigate flicker noise degradation, while a sampled loop filter is utilized to reduce spur degradation at cryogenic temperatures. Owing to these methods, this phase-lock loop (PLL) achieves a phase noise of −90 dBc/Hz at 10 kHz and a jitter of 445 fs at cryogenic temperature while using a power consumption of 4.93 mW. The reference spur is below −70 dB although the mismatch of charge pump degrades at least $2\times $ at cryogenic temperature.

28 October 2025 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
PWPeng Wang
Peng Wang
NWNan Wu
Nan Wu
FLFule Li
Fule Li
ZWZhihua Wang
Zhihua Wang
This paper presents a 12-bit, two-stage, 1GS/s pipelined-SAR ADC in 28-nm CMOS. The design leverages an open-loop amplifier and an alternate-comparator SAR ADC to enhance speed and power efficiency. A dither-based background calibration scheme is proposed to mitigate gain and offset errors with minimal hardware overhead and no timing penalty. The gain error calibration reuses the sub-ADC to resolve additional bits for interference cancellation, enabling fast convergence. The offset calibration directly tunes the relative offset between alternate comparators based on LSB distribution. The prototype achieves a signal-to-noise-and-distortion ratio (SNDR) of 60.1 dB and a spurious-free dynamic range (SFDR) of 75.7 dB with a Nyquist input. With interference cancellation, the gain calibration convergence is accelerated from $4.4\times 10 {^{{6}}}$ to $1.0\times 10 {^{{6}}}$ cycles. It consumes 14.72 mW from a 1V supply. The corresponding Schreier and Walden figure-of-merit (FoM) values are 165.4 dB and 17.8 fJ/conv.-step, respectively.

27 May 2026 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
YGYanshu Guo
Yanshu Guo
YLYaoyu Li
Yaoyu Li
WHWenqiang Huang
Wenqiang Huang
TTTian Tian
Tian Tian
NWNan Wu
Nan Wu
HJHanjun Jiang
Hanjun Jiang
This article presents a cryogenic quantum interface chipset at 3.5 K for superconducting transmon qubit operations. The chipset comprises a phase-detection readout and a phase-shifter-based polar-modulation controller with flexible scalability. With the proposed phase-detection readout scheme, a 9-bit time-to-digital converter (TDC)-based state detector is used to read out the qubit state by detecting the phase difference between the stimulus signal and the reflected signal. A low-IF N-path filter-based receiver and a multi-tone transmitter are co-designed to enable frequency-division multiplexing (FDM) dispersive readout of multiple qubits. A phase-shifter-based polar-modulation XY-driver is developed with support for fast phase quantum gate operation and derivative-removal-by-adiabatic-gate (DRAG) pulse generation. The Z-driver is realized using a static digital-to-analog converter (DAC) array and a 10-bit dynamic DAC for power efficiency. Fabricated in a 28-nm bulk CMOS process, the chipset occupies a die area of 4.6 mm2. The readout RX achieves a noise temperature of 40 K with a gain of 45–83 dB and a bandwidth of 1.2 GHz. The readout RX consumes 32% less power than state-of-the-art designs. The measured total readout power for simultaneous detection of two qubits is 12.2 mW, which is the lowest among readouts with a similar integration level. In addition, the controller achieves a spurious-free dynamic range (SFDR) of 49 dB for a 1-GS/s Z-driver and an SNR of 42 dB for a 1-GS/s XY-driver. The XY-driver consumes 4.3 mW per qubit under active control. Verified with practical transmon qubits, the readout fidelity exceeds 92.6%, approaching that of commercial instruments. A Rabi experiment at 5.61/6.36 MHz, a Ramsey experiment at 4.1 MHz, and a T1 experiment at $9.98~{\mu }$ s are also successfully observed using the proposed chipset at 3.5 K.

4 March 2026 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
NWNan Wu
Nan Wu
SWShenyu Wang
Shenyu Wang
HWHuizheng Wang
Huizheng Wang
PWPeng Wang
Peng Wang
XLXiao Liu
Xiao Liu
HJHanjun Jiang
Hanjun Jiang
The autoregressive nature of Large Language Models (LLMs) has enabled remarkable performance in language generation, making them a cornerstone in natural language processing. As context windows lengthen, the per-token key–value (KV) cache grows linearly with sequence length and turns the generation stage into a memory-bound operation. However, existing works focus primarily on an isolated stage of KV cache reduction, and most efforts incur significant hardware overheads. This results in a lack of cross-stage co-optimization and leaves significant reduction potential untapped. To address these challenges, we propose CrossKV, a software-hardware co-design architecture that accelerates LLM inference to fully achieve the potential of KV caching optimization. Motivated by our observation, we identify the three stages in KV caching and present a cross-stage co-optimization algorithm, including: a derivative-enhanced dynamic progressive pruning method, a DCT-driven key-vector low-rank compressing, and a dynamic clustered hybrid run-length encoding to reduce the KV caching while maintaining high accuracy. Then, an efficient architecture featuring cross-stage dynamic co-optimization with negligible hardware overhead is proposed to fully harness the algorithm of CrossKV. Our evaluations of CrossKV over 9 popular LLMs models and various long-context tasks demonstrate an average of $6.03\times $ and $4.10\times $ improvement for energy efficiency and speedup compared to existing SoTA Accelerators architecture. Compared to the Nvidia A100 GPU, CrossKV achieves an average $23.43\times $ energy efficiency and $4.64\times $ speedup, respectively.

24 July 2025 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
NPNing Pu
Ning Pu
NWNan Wu
Nan Wu
KLKaiji Liu
Kaiji Liu
YYYihuai Yang
Yihuai Yang
SZSiqi Zhang
Siqi Zhang
HJHanjun Jiang
Hanjun Jiang
An ultra-low-power (ULP) six-class keyword spotting (KWS) ASIC is presented in this article, which can be used in always-on speech-based human–machine interface applications. The ASIC is composed of a sampling frequency and resolution adaptive (SFRA) dual-mode analog-to-digital quantizer and a power-gated KWS engine with a multiplier-less processing element (PE) array. The dual-mode quantizer mainly operates as a 1.5-bit delta quantizer (DQ), providing inherent robustness against dc drift. It adaptively switches to high-resolution successive-approximation register (SAR) quantization mode upon detecting a sound event based on the DQ output. In the KWS engine, the multiplier-less PE array is reused for both feature extraction and gated recurrent unit (GRU)-based keyword classification. To unveil the tradeoffs between power consumption and flexibility, two versions of the classifier have been implemented, with ROM-based on-chip weight memory (WM) and SRAM-based WM. Fabricated in 180-nm CMOS technology, the proposed KWS ASIC with ROM and SRAM-based WM achieves six-class classification accuracies of 87.3% and 90.1%, respectively, on the Google Speech Command dataset (GSCD) while consuming 174 and 756 nW long-term average (LTA) power with a decision latency of 14 ms at a clock frequency of 256 kHz.

1 January 2026 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
NWNan Wu
Nan Wu
SWShenyu Wang
Shenyu Wang
HWHuizheng Wang
Huizheng Wang
PWPeng Wang
Peng Wang
XLXiao Liu
Xiao Liu
HJHanjun Jiang
Hanjun Jiang