2 October 2025 in IEEE Sensors Journal
Power semiconductor devices generate mechanical stress wave (MSW) signals during switching processes, which can be used for condition monitoring (CM) of these devices with the advantages of noninvasive and non-destructive monitoring. Existing MSW signal detection methods are susceptible to electromagnetic interference and environmental factors (such as high temperature, high voltage, confined spaces, or structural constraints), which limit their adaptability in complex working conditions. Bare fiber Bragg grating (FBG) sensors offer strong resistance to electromagnetic interference and excellent environmental adaptability. Therefore, this paper proposes a transient high-frequency MSW measurement method for power semiconductor devices based on high-sample-rate bare FBG sensors. The MSW signals generated during the switching process of power semiconductor devices are successfully captured based on high-sample-rate bare FBG sensors for the first time. Comparative signal measurements between single-ended acoustic emission (AE) sensors and bare FBG sensors demonstrate the electromagnetic interference resistance capability of bare FBG sensors. Moreover, this study expands the application range of MSW detection methods for power semiconductor devices and provides new technical support for investigating the generation and propagation mechanisms of MSW signals.
22 January 2025 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Effective condition monitoring (CM) technology ensures the safe operation of insulated gate bipolar transistors (IGBTs). Most CM methods for IGBTs focus on extracting electrical, thermal, and magnetic parameters. Recent studies indicate that at the switching moment, IGBTs can emit the switching stress wave (SSW) that is detectable by the acoustic emission (AE) sensors. However, using these SSWs to monitor the health status of IGBTs, even for discrete devices with relatively simple package structures, remains challenging. This paper investigates how SSWs from discrete IGBTs during power cycling change as bonding wires degrade and whether these waves are promising for monitoring the condition of internal bonding wires. In this work, a power cycle test platform and an SSW test platform for discrete IGBTs are built, and SSWs from discrete IGBTs during power cycling are analyzed. Results show that SSWs vary with the degradation of the device’s bonding wires, with changes in the time domain indicator of signal energy, reflecting SSW strength, and the frequency domain indicator of the center of gravity frequency, reflecting frequency shifts. These findings suggest the possibility for developing acoustic emission-based detection technology (AEDT) in CM of the IGBT.
7 March 2024 in IEEE Sensors Journal
With the increase of the operating life of lithium-ion batteries (LIBs), a large number of LIBs will enter the recycling and decommissioning stage in the next few years. Battery recycling, processing and reuse are important issues that need to be solved in the field of new energy vehicle battery applications. As an emerging solution, the echelon utilization of LIBs is gradually receiving attention. This paper proposes a lithium-ion battery echelon utilization evaluation method based on acoustic emission (AE). This research conducts battery cycle aging tests to diminish the state of health (SOH) of the batteries to 50%. An improved Empirical Mode Decomposition (EMD) algorithm is then employed to decompose the effective AE signals, followed by the extraction and analysis of frequency domain characteristic parameters. Subsequently, principal component analysis (PCA) is utilized for stratifying LIBs into different echelon utilization levels based on the characteristic parameters of AE signal. This paper applies improved EMD and PCA in the analysis and processing of AE signals for LIBs, thereby enhancing the methodology for detecting the health status of LIBs. This proposed approach not only offers fresh perspectives for data-driven research but also achieves real-time, online, non-destructive monitoring of LIB health status and facilitates the stratification for battery echelon utilization.
17 December 2025 in IEEE Sensors Journal
Lithium-ion batteries (LIBs) have become a critical technological cornerstone in modern energy infrastructure due to their high energy density and long cycle life. Monitoring of LIBs is essential for safety and reliability. Acoustic Emission (AE) technology enables non-destructive online monitoring of LIBs under normal operating conditions, coupled with electrochemical analysis. This paper employs an experimental setup to monitor AE signals during the charging and discharging processes of LIBs. A feature analysis of the preprocessed AE signals is conducted in conjunction with electrochemical-mechanical mechanisms. The results indicate that the deintercalation and intercalation of lithium ions (Li-ions) at the electrodes may generate opposite characteristics in the AE signals. The peak-peak amplitude and waveform time intervals of the signals show strong correlations with the electrical parameters and electrochemical states of the LIB under different charging and discharging modes, allowing for the identification of constant current (CC) and constant voltage (CV) stages. Analysis of data from multiple LIBs under different state demonstrates the universality of these features. This confirms that AE is an effective method for gaining detailed, real-time insights into the internal state and mechanisms of LIBs.
21 December 2022 in IEEE Transactions on Instrumentation and Measurement
Condition monitoring technology plays an important role in ensuring the reliable operation of power semiconductor devices. Power semiconductor devices can generate stress waves when turned on and off, and the stress waves released by the device can be detected by the acoustic emission sensor. Acoustic emission detection technology has the characteristics of both non-destructive and real-time and is expected to be applied to the condition monitoring of power semiconductor devices in the future. However, temperature and electromagnetic fields can both affect the output characteristics of the acoustic emission sensor, which is not conducive to the application of acoustic emission detection technology. In addition, it is not clear how temperature affects the stress waves generated by power semiconductor devices. In this paper, a novel stress wave extraction method for power semiconductor devices is proposed, and the influence of temperature on the stress wave generated by IGBT at the turn-off moment is explored. Besides, a signal characteristic of the stress waves associated with the junction temperature of the device is extracted as the temperature-sensitive acoustic parameter, which will lay the foundation for the future research of new methods for online monitoring of junction temperature.
16 October 2024 in IEEE Transactions on Instrumentation and Measurement
Power semiconductor device condition monitoring technology based on the mechanical stress wave (MSW) is an important means to study device failure mechanisms and evaluate device reliability. However, MSW signals have mainly been detected through acoustic emission sensors for contact detection. The operating temperature of the device will affect the detection results, and the presence of MSW low-frequency components may be overlooked due to limitations in sensor performance. This paper proposes an offline, non-contact MSW measurement method based on laser Doppler vibrometer for power semiconductor devices. This method obtained the complete MSW signal generated during the switching process of power semiconductor devices, especially the low-frequency components below 20 kHz. Moreover, the proposed method exhibits greater sensitivity in detecting the high-frequency components of the MSW compared to the contact detection. This study extends the detection methods and frequency ranges for the MSW in power semiconductor devices, thereby expecting to facilitate the generation and propagation mechanisms research of the MSW.