22 January 2025 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Effective condition monitoring (CM) technology ensures the safe operation of insulated gate bipolar transistors (IGBTs). Most CM methods for IGBTs focus on extracting electrical, thermal, and magnetic parameters. Recent studies indicate that at the switching moment, IGBTs can emit the switching stress wave (SSW) that is detectable by the acoustic emission (AE) sensors. However, using these SSWs to monitor the health status of IGBTs, even for discrete devices with relatively simple package structures, remains challenging. This paper investigates how SSWs from discrete IGBTs during power cycling change as bonding wires degrade and whether these waves are promising for monitoring the condition of internal bonding wires. In this work, a power cycle test platform and an SSW test platform for discrete IGBTs are built, and SSWs from discrete IGBTs during power cycling are analyzed. Results show that SSWs vary with the degradation of the device’s bonding wires, with changes in the time domain indicator of signal energy, reflecting SSW strength, and the frequency domain indicator of the center of gravity frequency, reflecting frequency shifts. These findings suggest the possibility for developing acoustic emission-based detection technology (AEDT) in CM of the IGBT.
1 December 2022 in IEEE Transactions on Power Electronics
Appropriate condition monitoring methods can evaluate the status of power semiconductor devices in time. The traditional methods of condition monitoring are based primarily on the identification of electrical, magnetic, and thermal parameters. In recent years, studies have found that power semiconductor devices can generate stress waves when they are turned on and off , which can be detected by acoustic emission sensors. Acoustic emission detection technology has the characteristics of rapidity, noninvasiveness, and real-time performance. It is a supplement to conventional condition monitoring methods and is anticipated to be used for the online monitoring of power semiconductor devices. However, the source mechanism of the stress waves that power semiconductor devices produce when they turn on and off has not yet been identified, which is not conducive to the further application of acoustic emission detection technology in power semiconductor devices. Therefore, taking an insulated-gate bipolar transistor as an example, this article proposes new theoretical models to explain the reason for the stress wave generated by the device at the time of turn- off , and verifies the rationality of the models through formula derivations, finite-element simulations, and experimental results.
6 April 2022 in IEEE Transactions on Instrumentation and Measurement
Nondestructive testing methods are gradually used to monitor the state of power devices, including acoustic emission (AE) testing. However, the application of AE in power devices is still in the research stage and relies on manual analysis. In this article, the stress wave signal of the device working under different electrical parameters is combined with deep learning (DL) for the first time to judge the working state of the device. Time-domain signals, frequency-domain amplitudes, and envelope of the stress wave and their corresponding label are used for the training of the artificial neural network (ANN), 1-D convolutional neural network (1DCNN), long short-term memory (LSTM), and recurrent neural network (RNN). The training effect of 1DCNN combined with time-domain series is the best, and the accuracy rate can reach up to 100%. Compared with other classic 1DCNN models, the proposed 1DCNN method does not require complex feature extraction and model calculations, which accurately identifies the working state of the device and also improves its speed.
9 December 2021 in IEEE Sensors Journal
Acoustic emission (AE) is a fast, non-destructive and real-time detection method widely applied in the power industry. It has been reported that AE has potential application value in the condition monitoring of insulated gate bipolar transistor (IGBT). The stress wave is released at the moment when the IGBT is turned on and off, which can be measured by the AE sensor. However, due to interference from the changing electric field on the AE sensor, the pulse signal is frequently intermingled into the stress wave during measurement, making stress wave extraction difficult. In this paper, a novel stress wave extraction method of based on the differential AE sensor is proposed, which can decouple the pulse interference mixed in the stress wave signal from IGBT, and the effectiveness of the method is demonstrated through experiment. Furthermore, extraction experiments of stress wave from IGBT under the conditions of various gate turn-off resistance ( ${R}_{{\mathrm {off}}}$ ), bus voltage ( ${V}_{{\mathrm {dc}}}$ ), and turn-off current ( ${I}_{{\mathrm {off}}}$ ) are carried out. By testing two models of IGBT from different manufacturers, similar conclusions can be obtained that the amplitude, peak-peak value and signal energy of IGBT’s stress wave are all strongly related to ${R}_{{\mathrm {off}}}$ , ${V}_{{\mathrm {dc}}}$ and ${I}_{{\mathrm {off}}}$ . In addition, the source mechanism of the stress wave from IGBT is also discussed through the analysis of the relationship between turn-off loss ( ${E}_{{\mathrm {off}}}$ ) of the IGBT and ${R}_{{\mathrm {off}}}$ , ${V}_{{\mathrm {dc}}}$ and ${I}_{{\mathrm {off}}}$ .
5 July 2021 in IEEE Sensors Journal
The traditional condition monitoring (CM) methods for power electronic devices are normally using electrical, magnetic, and thermal sensors. Alternatively, this paper uses the acoustic emission (AE) sensor to measure the mechanical stress wave generated inside the power electronic devices such as MOSFETs. Specifically, this paper focuses on the influence of measured surface, electrical parameters, and filters on the stress wave signal and the reliability of repeatability tests. Under the single pulse test with 300V drain-source voltage ( ${V}_{\text {ds}}$ ), the same acoustic emission sensor is pasted on the MOSFET package and the cooling surface with a coupling agent. The factors affecting stress waves are studied by changing electrical parameters and filters. The proposed experiments draw the following conclusions. 1) The characteristic parameters of the stress wave measured on the package and cooling surface of MOSFET are different under the same electrical parameters. 2) The characteristic parameters of the stress wave are almost unchanged under the same test conditions, which shows that the stress wave measurement method is reliable. 3) The peak value of the stress wave, the frequency domain amplitude, and energy are affected by ${V}_{\text {ds}}$ and turn-on time ( ${t}_{\text {on}}$ ). Specifically, the gate voltage ${V}_{\text {gs}}$ has no obvious trend to the amplitude. The impact on package is basically the same as the cooling surface.
21 December 2022 in IEEE Transactions on Instrumentation and Measurement
Condition monitoring technology plays an important role in ensuring the reliable operation of power semiconductor devices. Power semiconductor devices can generate stress waves when turned on and off, and the stress waves released by the device can be detected by the acoustic emission sensor. Acoustic emission detection technology has the characteristics of both non-destructive and real-time and is expected to be applied to the condition monitoring of power semiconductor devices in the future. However, temperature and electromagnetic fields can both affect the output characteristics of the acoustic emission sensor, which is not conducive to the application of acoustic emission detection technology. In addition, it is not clear how temperature affects the stress waves generated by power semiconductor devices. In this paper, a novel stress wave extraction method for power semiconductor devices is proposed, and the influence of temperature on the stress wave generated by IGBT at the turn-off moment is explored. Besides, a signal characteristic of the stress waves associated with the junction temperature of the device is extracted as the temperature-sensitive acoustic parameter, which will lay the foundation for the future research of new methods for online monitoring of junction temperature.