Aim: The aim of this review paper is to summarize recent developments and research in robotics, relevant to the field of ankle rehabilitation, to overview new findings and determine the actual state of the art. Method: The literature search was performed using scientific and medical databases (Scopus, PubMed and Web of Science) and other websites related to robots used in the area of ankle rehabilitation, analysing studies from 1950s to present. Information about the mechanical and kinematic specifications, actuation and stage of development was extracted from the selected literature. Results: Several types of rehabilitation robots have been considered, and they were classified depending on their architecture and design features. We we found that, regardless of the differences in architectures, only a few of them have been commercialized. The majority of rehabilitation robots designs allows plantarflexion-dorsiflexion movements. Unless some exceptions, most of the wearable robots do not allow the adduction-abduction movement. Neither the physical appearance of the robot nor the user’s perception towards it has not regularly been taken into account in the design stage. This limits the possibility of successful commercialization. Conclusions: Up to the present moment, the main challenges in the field of robot rehabilitation are the lack of unique rehabilitation protocols capable to fulfil the needs of all types of patients and the additional resources to measure the effectiveness of proposals that have not yet been commercialized. Nonetheless, we have mentioned above three areas were the challenges in design are more pressing. The first one is the robot architecture, which still presents some incommodities nowadays to emulate the ankle joint movement in a natural way. Thus, the displacements experienced by the axes in the joint must be adaptable to each patient and a wide range of pathologies. Moreover, many proposals are not been conceived to the purpose of commercialization, and even less to become an object of personal use.
2 March 2016 in Journal of Mechanisms and Robotics
The method of intersection of surfaces generated by kinematic dyads is applied to obtain mechanisms that are able to shift from one mode of motion to another. Then a mobility analysis shows that the singularities of the generated surfaces can be used to obtain mechanisms which can change their number of degrees-of-freedom depending on its configuration. The generator dyads are connected as usually done by a spherical pair. However, in the cases shown in this contribution the three-degrees-of-freedom of the spherical pair are not all necessary to keep the kinematic chain closed and movable, and the spherical pair can be substituted by either a pair of intersecting revolute joints or a single revolute joint. This substitution can be obtained by means of two methods presented in this contribution.
20 June 2008 in IEEE Transactions on Systems, Man and Cybernetics, Part C (Applications and Reviews)
Current industrial robot-programming methods require, depending on the task to be developed, an elevated degree of technical ability and time from a human operator, in order to obtain a precise, nonoptimal result. This correspondence paper presents a methodology used to generate an optimal sequence of robot configurations that enable a precise point-allocating task applicable, for instance, to spot-welding, drilling, or electronic component placement maneuvers. The optimization process starts from a nonoptimal, initial sequence designated intuitively by a human operator using an easy-to-use interface. In this correspondence paper, intuitive programming is considered as the process of defining, in a computer graphics environment and with a limited user knowledge of robotics or the industrial task, the sequence of motions that enable the execution of a complex industrial robotic maneuver. Such an initial sequence is later followed by a robot, very precisely, using a vision-based, calibration-free, robot control method. Further robot path optimization is performed with a genetic algorithm approach. An industrial robot, which is part of the experimental setup, was used in order to validate the proposed procedure.
Kinematic chains are obtained from the helicoid–helicoid intersections applying the method of surfaces generated by kinematic dyads. Some local properties of the helicoids are used to obtain the bifurcation points in the configuration space of the obtained kinematic chains. It is proven that certain relationships between the two helicoids lead to a periodic behavior of these bifurcations, which suggest that, if the kinematic pairs (P and H) could move without a limit, the kinematic chain would theoretically feature an infinity of operation modes. Finally, a mechanism which is able to change the helicoid–helicoid intersection curve during its motion is proven to change its finite mobility in one of its operation modes.