This article presents a linear microstrip patch antenna array at the X-band that incorporates an aperiodic artificial magnetic conductor (AMC) metasurface which utilizes phase cancellation techniques for reducing both the in-band and out-of-band Radar Cross Section (RCS). The structure consists of two substrates with three layers, the top layer consists of 8 antenna elements along with AMCs which are aperiodically oriented for wideband RCS reduction, and the middle layer (in between the two substrates) consists of a corporate feed network for the antenna array, followed by the ground plane in the bottom layer. Few AMC blocks have been used to achieve a wideband RCS reduction in the frequency range of 6 GHz to 16 GHz with more than 85% reduction in both X- and Y-polarizations utilizing a low profile, compact design. Along with the monostatic RCS reduction, a bistatic RCS reduction up to 40° has also been observed in simulations. The proposed structure has been fabricated and measurements of the reflection coefficient, gain, patterns, and monostatic RCS plots have been carried out. Measured results indicate good agreement with the results of the simulations after considering all measurement errors.
29 April 2024 in IEEE Transactions on Electromagnetic Compatibility
We devise and experimentally validate a systematic method for designing frequency selective surface (FSS)-based multiresonant ultrabroadband microwave absorbing structures. Crucially, our method offers the capability to engineer the frequency separation between consecutive harmonics of an FSS-based sub-wavelength cavity, thereby engendering an ultrabroadband performance (atleast 90% absorption between 5.7 and 46.2 GHz) in an extremely low-profile design. Furthermore, the materialization and manipulation of a zeroth-order absorption resonance in the structure not only helps us limit the cavity thickness to merely 0.134 $\lambda _{L}$ , but also exhibits a frequency pinned angular performance. Our formulation starts by realizing that the incorporation of a phase discontinuity in ground plane scattering response can effectuate simultaneous and tuneable emergence of zeroth and first-order resonances in a single sub-wavelength cavity. With this conception, we first design a thin microwave cavity exhibiting a phase discontinuity roughly at the midway of the operating band. This cavity is then employed as an effective ground plane, which leads to the emergence of zeroth and first-order modes at widely separated frequencies of 8 and 37 GHz, effectuating an ultrabroadband absorption. Experimental verification was performed by fabricating a 60 × 60 unit cell sample using laser micromachining (on indium tin oxide/polyethylene terephthalate resistive sheets) and microwave measurements were performed that agree well with simulations.
11 October 2024 in Journal of Materials Chemistry C
An industrially scalable wet etching technique to pattern ITO from PET substrates using dry film photoresist was developed. This process preserves the substrate’s integrity, maintaining electrical and optical properties.
1 January 2026 in IEEE Journal on Multiscale and Multiphysics Computational Techniques