23 May 2025 in Journal of Advanced Research Design
Lean involves optimizing entire value streams to minimize waste and enhance customer value in production practices. Process improvement encompasses the identification, analysis and enhancement of existing business processes to optimize performance and align with best practice standards for a company's products or services. Companies face the imperative of increasing production to meet demand per day. The challenges include enhancing the process effectiveness in the production line. Process effectiveness measures a process's ability to produce desired results, evaluated qualitatively. FlexSim integrates simulation, artificial intelligence, three-dimensional computer image processing and data processing technology. The research objectives include identifying the operational process flow in the study company, proposing a new production process flow using FlexSim simulation software and evaluating the process flow for reducing lead time as part of process improvement. This research adopts a qualitative method, collecting data through observation and interviews. This research helps companies to increase the efficiency and effectiveness of their productivity. The data is analysed using simulation software, focusing on production process improvement to enhance process effectiveness in the PMI's company. The study's outcome reveals a 19.92% reduction in lead time achieved by consolidating processes and eliminating waste, such as waiting time, transportation and product motion. This reduction translates to cost savings and increased profitability, highlighting the positive impact of the implemented changes on the overall performance of the company.
28 February 2022 in Archives of Metallurgy and Materials
This study focused on the reclamation of ash from incineration process and development of new artificial lightweight aggregate (LWA) that have comparable properties with existing natural coarse aggregate. The main objective of this study is to examine potential use of recycled municipal solid waste incineration (MSWI) ash as raw material in LWA production with a method of cold-bonded pelletization. Two types of incineration ash which is bottom ash (BA) and fly ash (FA) were collected from Cameron Highland Incineration Plant, Malaysia. The properties of BA and FA are studied by means of X-Ray Fluorescence (XRF) and microstructure of these ashes were inspected using Scanning Electron Microscope (SEM). The properties of BALA and FALA produced in this study is examined including loose bulk density, water absorption and aggregate impact value (AIV). From the results of both types of artificial LWA, the lowest loose bulk density of BALA is BALA50 with 564.14 kg/m3 and highest is at 831.19 kg/m3. For FALA50, lowest loose bulk density is 573.64 kg/m3 and highest is 703.35 kg/m3. Water absorption of BALA and FALA is quite similar with one another in with the value of 23.8% and 22.6%, respectively. Generally, FALA have better qualities of LWA comparing with BALA with lower bulk density and water absorption and can be categorized as strong aggregate. In summary, reclamation and reutilization of incinerator ash has generated acceptable qualities for artificial LWA. Both types of BA and FA shown a great potential to be recycled as additional materials in artificial aggregate production.
12 August 2024 in Jurnal Teknologi (Sciences & Engineering)
Waste materials can be used in concrete as part of replacement material. Currently, 4 billion tires are abandoned in landfills, with 1 billion generated annually and 1.2 billion dumped without treatment by 2030. The number of waste tires is continually increasing, because of the growing use of transport vehicles. Therefore, effectively reusing waste tires as crumb rubber in the mix of concrete can save energy and protect the environment, while the use of steel fiber in the concrete will help enhance its properties. The aim this research to producing the steel fiber crumb rubber concrete (CRSFC) and to balance the issues of strength loss and sustainability. Crumb rubber is used as sand replacement in the mix concrete in the following proportions: 0%, 5%, 10%, 15%, and 20%, while steel fiber is added in the following proportions: 0.5% by volume. Slump, compressive strength, dry density, water absorption, ultrasonic pulse velocity, and rebound hammer tests are performed on the concrete after curing. As the percentage of CRSFC increased, the slump value and dry density decreased while the water absorption increased. Steel fiber helps increase compressive strength by 33 % over normal concrete. The optimum percentage of crumb rubber in CRSFC as a sand replacement is approximately 5% to 10% by volume. In summary, incorporating crumb rubber and steel fibers into concrete can result in a more eco-friendly and resilient construction material.
11 September 2022 in Journal of Advanced Research in Applied Sciences and Engineering Technology
Despite the current advancements in, and increasing use of renewable types of energy, approximately 40% of the world’s electricity is still produced by coal fired power stations. This trend is significantly higher in some continents, for example approximately 70% in India and up to 90% in South Africa. In this study the fly-bottom ash (FBA) mixture with different component percentages of BA (bottom ash)100, FA (fly ash) 25-BA75, FA50-BA50, FA75-BA25 and FA100 were modified with 2% of poly-vinyl alcohol (PVA), and tested in terms of particle size distribution, specific gravity, pH, surface morphology, mineralogical-compound content, and engineering properties. The physiochemical modified FBA were examined via scanning electron microscope (SEM), X-ray fluorescence, and Fourier transform infrared spectroscopy (FTIR) analysis. Polymeric-modified FBA for all compositions exhibited high pH values within the range of 10.11–10.70. SEM image exhibited agglomerated and strongly bonded PVA-modified FBA with FA50-BA50 composition because of the effect of polymer that reacted with the fine ashes. The unsubstantial shift in peak position of Si/Al-O stretches showed electrostatic interaction between PVA and FBA based on FTIR analysis. The PVA-modified FBA at composition of FA50-BA50 increased the gradient of stress–strain curves, which significantly improved the strength behavior of PVA-modified FBA sample. It is thus imperative that other sustainable methods of managing coal combustion-by products be expanded .
1 November 2021 in IOP Conference Series: Earth and Environmental Science
This study is on the sound performances of a selected number of partition boards in Industrialised Building System (IBS) buildings. The proposed bespoke board were made from squandered or waste materials, namely, coconut shells and newspapers. Each board had been tested for six different distances from the speaker in four different levels of sound, changing the level of the sound frequency. Thereon, the results were analysed. The average result of each board with various distances from the sound source, starting from 0 cm to 220 cm, was combined into under one sound level. The percentage of the noise reduction coefficient is designated by the vertical line whereas the levels of the sound is designated by the horizontal line. Point 1 stands for the low frequency and low intensity test. Point 2 stands for low frequency and high intensity test. The board that is being made of 80% coconut shell, 15% cement and 5% newspaper has an average of noise reduction coefficient of 0.21 in low frequency and low intensity, 0.21 in low frequency and high intensity, 0.24 in high frequency, high intensity and 0.12 in high frequency low intensity.