18 April 2022 in Journal of Applied Physics
The breakdown process of capacitively coupled plasma (CCP) in the presence of a matching network is rarely studied, even though it is the indispensable part of the most laboratory and industrial devices of CCP. Based on the method of Verboncoeur, the solution method of the general “L”-type match circuit coupled with a particle-in-cell/Monte Carlo code is deduced self-consistently. Based on this method, the electrical breakdown process of CCP is studied. Both the plasma parameters and the electric parameters of the matching network during the breakdown are given and analyzed. In the pre-breakdown phase, the entire circuit can be considered as a linear system. However, the formation of the sheath during breakdown significantly enhanced the capacitance of the discharge chamber, which changed the electric signal amplitude of the external circuit. With the stabilization of plasma, the equivalent capacitance of CCP increases, which continues to change the electrical signal until the steady-state is reached. Accompanied by plasma stabilization is the appearance of high-order harmonics of discharge current caused by the gradually oscillating CCP capacitance. The breakdown characteristics can be obviously affected by the capacitance of the matching network. In the case of a breakdown zone, some breakdowns with special characteristics can be obtained by choosing the different capacitors. These works might be a reference for understanding the interaction between the plasma and the external circuit during the breakdown process and how to modulate the gas breakdown by controlling the external circuit.
30 March 2022 in Journal of Physics D: Applied Physics
Capacitively coupled plasma (CCP) in CF4 has been widely used in the semiconductor industry. However, its breakdown process at low pressure has rarely been studied. In this paper, we study the whole CCP breakdown process in CF4 using the 1D implicit particle-in-cell/Monte Carlo collision (PIC/MCC) method. The detailed evolution of the plasma parameters is given, and both the particle balance and power evolution are discussed. The electron density initially grows exponentially, driven by the penetrating electric field. Both the ionization in the discharge gap and the boundary interaction are significant for electron avalanches. The formation of a sheath maximizes the ionization rate and the heating power, which thoroughly changes the field structure. In the post-breakdown phase, the growing negative ion density shrink the sheaths and changes the heating mode from the α mode to the drift-ambipolar mode. The particle generation rate and heating power show a growth trend after a brief decline. The growth of the recombination rate slowly balances the gain and loss of ions, which finally stabilizes the discharge.
1 April 2022 in Plasma Sources Science and Technology
Particle and energy balance relations are the key to understanding the discharge in low-temperature plasmas. In this note, we derived the energy transport balances in capacitively coupled plasmas (CCPs) based on the electromagnetic theory. Then we calculated the energy transport terms in CCPs from particle-in-cell/MonteCarlo (PIC/MC) simulations, including the energy absorption, energy density, energy flow, and the energy dissipation terms, both for the particles and the field. The spatial-temporal dependant and averaged distributions of energy transport terms are shown at different pressure, demonstrating the correctness and the effectiveness of the method. This revisited method may be used to aid the studies of the electrons heating mechanism in CCP, as well as in some other plasma sources.
1 September 2025 in Plasma Sources Science and Technology
This study investigates the transition mechanism from E-mode to H-mode in inductively coupled plasma (ICP) systems by employing a two-dimensional implicit electrostatic particle-in-cell/Monte Carlo collision simulation. By analyzing the electron density, energy, potential distribution, and heating dynamics under different inductive coupling powers, we identified a critical transition interval in the E–H mode transformation. This interval is characterized by a sharp increase in plasma density and a shift of the electron energy probability function from a bi-Maxwellian distribution to a single Maxwellian distribution. In E-mode, capacitive coupling effects dominate, and sheath oscillation heating leads to the non-uniformity of electron density and energy distribution. As the power increases, inductive coupling effects become dominant, driving efficient ionization through high-energy electrons and homogenizing the plasma parameters. In H-mode, inductive coupling heating becomes the primary mechanism, reducing sheath effects and enhancing energy redistribution through electron collisions. This study elucidates the dynamic mechanism of the E–H mode transition and its associated heating processes, providing a theoretical basis for optimizing ICP technology applications.
1 September 2023 in Journal of Vacuum Science & Technology B
Capacitively coupled plasma (CCP) tools are crucial for etching, deposition, and cleaning processes in the semiconductor industry. A comprehensive understanding of their discharge characteristics is vital for the advancement of chip processing technology. In this study, the influence of external circuitry on the breakdown process was investigated under the CF4 discharge system, with a particular focus on challenges presented by the nonlinear nature of the plasma. The results demonstrated that the external circuit significantly affects the discharge process by altering the electric field distribution as well as modifying the electron density and temperature of the plasma. By incorporating the matching circuit, stable discharge was achieved at reduced voltage levels. During breakdown, a substantial increase in the capacitance of the discharge chamber is induced by the formation of the sheath, which alters the amplitude of the electrical signal within the external circuit. The breakdown characteristics are significantly influenced by the capacitance of the matching network. Breakdowns with distinctive characteristics can be achieved by selectively choosing different capacitors. Furthermore, a shift in the CF4 discharge mode at different pressures under the external circuit model and the alteration in the discharge mode affect the electrical properties of the plasma in the matched circuit. These findings could be used to optimize the discharge of CCP and its applications, including surface treatment, material synthesis, and environmental remediation.
25 January 2021 in Proceedings in Applied Mathematics and Mechanics
Electrospun membranes have a great potential in myringoplasty, as the special microstructure of fibers could be comparable to the fiber structure of the tympanic membrane (TM), thus, making it an potential implant for tympanic membrane reconstruction. In this work, the microscale parameters of the fiber structure were studied in a numerical homogenization procedure. The aim of the investigations was to obtain an implant that has a compromise between acoustic and mechanical properties and which at macroscale is comparable with the human TM. The numerical results were verified with experiments on first samples.