1 June 2021 in Plasma Sources Science and Technology
Most plasma sources have to undergo a breakdown process, during which, energy is injected, and particles are ionized. However, we still know little about this fast evolution process. In this work, a one-dimensional direct implicit particle-in-cell/Monte-Carlo collision (PIC/MCC) program is used to study the breakdown process of a capacitively coupled plasma (CCP) driven by dual radio frequencies. The results show that the breakdown process can be divided into three phases: the pre-breakdown, transition, and post-breakdown phases. In the pre-breakdown phase, the plasma density and heating power grow exponentially. The electric field can penetrate the whole discharge region without any shielding, resulting in a higher-than-average electron energy. Secondary electron emission is critical to grow the electron numbers under these discharge conditions. During the transition phase, the formation of sheaths maximizes the electron generation rate and heating power. The formation of sheaths also causes a drastic change in the electrical characteristics of CCP devices. In the post-breakdown phase, the plasma parameters gradually evolve until a steady state is reached. The decreasing rate of generation and the increasing rate of particle loss gradually equalize. The trends of the power gain and plasma loss are similar to the curves for the particle generation and loss rates, and a dynamic equilibrium is finally reached in the last steady state.
22 August 2022 in Journal of Applied Physics
Impedance matching can maximize the absorbed power transferred to the plasma load and minimize the reflected power, making it critical and indispensable for capacitively coupled plasmas (CCPs). The external circuit usually interacts with the plasma nonlinearly, so the global simulation of the external circuit and plasma and the matching design is very challenging. In this work, an a priori model was proposed to match the plasma impedance and the external circuit impedance for single-frequency CCPs. By calculating the plasma impedance and the matching network, the matching parameters were iteratively updated to find the best matching parameters. By adjusting the capacitance and the inductance of the circuit by numerical simulations, the reflection coefficient can be significantly reduced. At the same time, the plasma power absorption efficiency will be significantly improved. The universality of the method was demonstrated by choosing different initial circuit, discharge, and plasma parameters. The proposed method provides an effective matching design reference for CCPs.
8 August 2022 in Computer Physics Communications
21 January 2022 in Journal of Physics D: Applied Physics
Matching networks are of vital importance for capacitively coupled plasmas (CCPs) to maximize the power transferred to the plasma discharge. The nonlinear interaction between the external circuit and plasma has to be considered to design suitable matching networks. To study the effect of the matching circuit, we coupled particle in cell/MC(Monte Carlo) model and nonlinear circuit equations based on Kirchhoff’s laws, in a fully nonlinear and self-consistent way. The single-frequency capacitively coupled discharge with ‘L’-Type matching networks are simulated. Fully self-consistently results of circuit and plasma parameters are presented and then power absorbed by the plasma and efficiency are calculated. With the tune of the matching network, the efficiency can reach 28.7%, leading to higher potential as well as higher electron density at fixed source voltage. Besides, only very small components of the third harmonics are found in the plasma voltage and current while surface charge densities have multiple harmonics on account of the strong plasma nonlinearity. Finally, the effects of matching capacitors on discharge are analyzed, results show that smaller and of 500–1000 pF may be a proper choice for better matching, resulting in higher voltage across the CCP, and thus higher electron density and power absorption efficiency are obtained.
18 April 2022 in Journal of Applied Physics
The breakdown process of capacitively coupled plasma (CCP) in the presence of a matching network is rarely studied, even though it is the indispensable part of the most laboratory and industrial devices of CCP. Based on the method of Verboncoeur, the solution method of the general “L”-type match circuit coupled with a particle-in-cell/Monte Carlo code is deduced self-consistently. Based on this method, the electrical breakdown process of CCP is studied. Both the plasma parameters and the electric parameters of the matching network during the breakdown are given and analyzed. In the pre-breakdown phase, the entire circuit can be considered as a linear system. However, the formation of the sheath during breakdown significantly enhanced the capacitance of the discharge chamber, which changed the electric signal amplitude of the external circuit. With the stabilization of plasma, the equivalent capacitance of CCP increases, which continues to change the electrical signal until the steady-state is reached. Accompanied by plasma stabilization is the appearance of high-order harmonics of discharge current caused by the gradually oscillating CCP capacitance. The breakdown characteristics can be obviously affected by the capacitance of the matching network. In the case of a breakdown zone, some breakdowns with special characteristics can be obtained by choosing the different capacitors. These works might be a reference for understanding the interaction between the plasma and the external circuit during the breakdown process and how to modulate the gas breakdown by controlling the external circuit.
26 September 2022 in Journal of Physics D: Applied Physics
Micro-discharge is the process that gas breakdown occurs on a small spatial scale to generate plasma. With the decrease of the discharge scale, the high electric field makes the field emission (FE) play a leading role in the breakdown process of the micro-discharge, which is one of the reasons that the breakdown voltage deviates from the Paschen curve in a small gap. A one-dimensional implicit particle-in-cell Monte Carlo collision model is used to simulate the whole breakdown process of direct current micro-discharge sustained by FE in argon. The results show that the discharge after breakdown is in arc mode, the breakdown process can be divided into three stages: the pre-breakdown stage, the breakdown stage, and the post-breakdown stage. In the pre-breakdown stage, the sheath and plasma are not formed, the external electric field can penetrate the entire gap. In the breakdown stage, gas breakdown occurs. As the sheath is formed, the rate of change of plasma parameters increases rapidly and the discharge gap changes from capacitive to resistive. In the post-breakdown stage, the anode sheath gradually becomes thinner, but the region where the field is reversed still exists. The particle and energy balance gradually reach equilibrium, and the entire discharge evolves to a quasi-steady-state.