Here, we propose a fully-metallic implementation of a Luneburg lens operating at Ka-band with potential use for 5G communications. The lens is implemented with a parallel plate that is loaded with glide-symmetric holes. These holes are employed to produce the required equivalent refractive index profile of a Luneburg lens. Glide symmetry and inner metallic pins are employed to increase the equivalent refractive index. The lens is fed with rectangular waveguides designed to match the height of the parallel plate, and it is ended with a flare to minimize the reflections.
31 October 2022 in IEEE Transactions on Antennas and Propagation
Antennas for future communication systems are required to be highly directive and steerable to compensate for the high path loss in the millimeter-wave band. In this work, we propose a linear array of modulated geodesic Luneburg lens (the so-called water drop lens) antennas operating at 56-62 GHz. The lens array antenna features two-dimensional beam scanning with low structural complexity. The lenses are fully metallic and implemented in parallel plate waveguides, meaning that they are highly efficient. Each lens is fed with 13 rectangular waveguides surrounded by glide-symmetric holes to suppress leakage. The lenses provide 110 degree beam coverage in the H-plane with scan losses below 1 dB. In order to scan in the E-plane, we use a feeding network based on a 1:4 power divider and three phase shifters. In this configuration, the array can scan 60 degrees in the E-plane, albeit with higher scanning losses than in the H-plane. The lens array is manufactured and a good agreement between simulated and experimental results is obtained.
9 June 2023 in IEEE Transactions on Antennas and Propagation
Quasi-optical beamformers provide attractive properties for antenna applications at millimetre-wave frequencies. Antennas implemented with these beamformers have demonstrated wide angle switching of directive beams, making them suitable as base station antennas for future communication networks. For these applications, it is essential to ensure a high beam crossover gain to provide a robust service to end users within the steering range. Here, we propose a geodesic generalized Luneburg lens antenna operating from 57 to 67 GHz that provides increased crossover gain compared to previously reported geodesic Luneburg lens antennas. The focal curve of the generalized Luneburg lens can be displaced from the beamformer, allowing for a higher angular resolution in the placement of the feed array along the focal curve. The lens is fed with 21 ridge waveguides with an angular separation of 5.1 degrees, thus providing beam steering in a 102-degree range. The peak realized gain varies from 19 to 21 dBi throughout the steering and frequency ranges and the beam crossover gain is roughly 3 dB below the peak gain. The simulations are experimentally validated.
4 October 2022 in IEEE Transactions on Antennas and Propagation
Here, we propose a low profile polarizing technique integrated in a parallel plate waveguide configuration, compatible with fully metallic geodesic lens antennas. The geodesic shape of the antenna is chosen to resemble the operation of a Luneburg lens. The lens is fed with 11 waveguide ports with 10° separation producing 11 switchable beams in an angular range of ±50°. Two metallic polarizing screens are loaded into the aperture of the antenna to rotate the electric field from vertical linear polarization, which is the polarization of the TEM (transverse electromagnetic) mode supported in the lens, to +45° linear polarization. Since the polarizing unit cells are integrated into the aperture of the antenna, the final design is compact. Additionally, the size of the polarizing unit cells is about 0.55λ at the central frequency of operation making the antenna suitable to produce an array formed of stacked lenses. A prototype of the antenna in the K a -band was manufactured and tested, verifying the performance obtained in simulations.
7 May 2024 in IEEE Transactions on Antennas and Propagation
An ultra-high-gain E-band dual-reflector antenna for 5G backhaul with beam tracking function is proposed in this paper. Beam tracking is achieved by defocussing the feed away from the focus point of the sub-reflector, while keeping the interface with the transmit-receive unit stationary by applying a movable gap-waveguide configuration. The antenna has been prototyped and measured. The measured reflection coefficients remain below –10 dB for both horizontal and vertical polarizations over 71 – 86 GHz, almost independent from the offset positions of the feed. The measured radiation patterns agree well with the simulated ones, with a peak gain of about 50 dBi in the band and less than 1 dB gain drop for beam steering within ±2°. Finally, a low-cost and environmentally friendly mechanical tracking system is proposed, prototyped, and tested. Measurements have verified that the tracking system functions well for slow sways.
11 March 2022 in IEEE Transactions on Microwave Theory and Techniques
In this article, we propose a hybrid glide-symmetric metasurface which presents an electromagnetic bandgap (EBG) behavior at the $Ka$ -band. The innovative part of this work is the hybrid nature of the periodic structure, which is implemented with holes on two different technologies: printed circuit board (PCB) and metallic waveguide. These holes avoid propagation in an undesired parallel plate created between a PCB and a metallic waveguide. To demonstrate the potential of this concept, a hybrid glide-symmetric configuration was placed surrounding a PCB–waveguide transition at the $Ka$ -band to reduce the leakage created by undesired air gaps. A prototype was manufactured and measured to corroborate the effectiveness of this technique to reduce losses and crosstalk.