17 December 1998 in Applied Physics Letters
We have monitored the progression of the dewetting of a partially brominated polystyrene (PBrS) thin film on top of a polystyrene (PS) thin film with scanning transmission x-ray microscopy (STXM) as well as photoemission electron microscopy (PEEM). We mapped the projected thickness of each constituent polymer species and the total thickness of the film with STXM, while we determined the surface composition with PEEM. Our data show that the PBrS top layer becomes encapsulated during the later stages of dewetting and that atomic force microscopy topographs cannot be utilized to determine the contact angle between PBrS and PS.
17 June 2006 in Analytical Chemistry
1 January 2003 in Journal of Adhesion Science and Technology
A series of ethylene vinyl acetate (EVA) copolymers were blended with aromatic hydrocarbon resins in the molten state in various ratios and possible relations between viscoelastic and adhesion prop...
1 January 2002 in Journal of Magnetic Resonance
15 April 1996 in Journal of Applied Physics
Impregnating transition metallic compounds into porous glass is a simple way to form ultrafine particles in a glass matrix. In our studies, ultrafine particles were prepared by impregnating Fe compounds into porous glasses (pore size 70±21 Å) and annealing. After annealing, the samples were studied at different temperatures with a vibrating sample magnetometer. In the annealed glasses two types of particles were formed: (a) superparamagnetic particles and (b) ferromagnetic particles with exceedingly high coercivity (Hc=13 kOe at 298 K). The ratio between superparamagnetic and high coercivity particles depends on the annealing temperature and time. In samples annealed at lower temperatures or at high temperature for short times, only superparamagnetic particles were found. In those annealed at high temperatures after certain times, only high coercivity particles were found. It was also found that the blocking temperature TB of the high coercivity particles depends on the annealing process. Moreover it was found that the Curie temperature of the high coercivity particles is below 520 K.
29 October 2022 in Journal of Materials Research and Technology