1 April 2014 in IEEE Transactions on Antennas and Propagation
A novel method is presented to design single-feed high-gain EBG resonator antennas (ERAs) with significantly wider bandwidths. Dielectric contrast is introduced to 1-D EBG superstructures composed of unprinted dielectric slabs, and the thicknesses of each of these slabs is optimized to achieve a wideband defect mode in a unit-cell model. Next, antennas are designed and their superstructure areas are truncated to increase the antenna bandwidth and aperture efficiency while decreasing antenna footprint. We demonstrate that a small superstructure area increases the 3-dB bandwidth of ERAs significantly. A prototype ERA designed with a single feed and superstructure area as small as 1.5 λ 0 ×1.5 λ 0 has a measured 3-dB directivity bandwidth of 22% at a peak gain of 18.2 dBi. This prototype antenna was made out of three slabs of different dielectric constants, two of them touching each other. This prototype demonstrates more than 85% reduction in the ERA footprint alongside a drastic improvement in bandwidth over the 3%-4% measured bandwidth of the classical single-feed ERAs with unprinted slabs.
1 June 2015 in IEEE Transactions on Antennas and Propagation
A novel technique to design a phase-correcting structure (PCS) for an electromagnetic band gap (EBG) resonator antenna (ERA) is presented. The aperture field of a classical ERA has a significantly nonuniform phase distribution, which adversely affects its radiation characteristics. An all-dielectric PCS was designed to transform such a phase distribution to a nearly uniform phase distribution. A prototype designed using proposed technique was fabricated and tested to verify proposed methodology and to validate predicted results. A very good agreement between the predicted and the measured results is noted. Significant increase in antenna performance has been achieved due to this phase correction, including 9-dB improvement in antenna directivity (from 12.3 dBi to 21.6 dBi), lower side lobes, higher gain, and better aperture efficiency. The phase-corrected antenna has a 3-dB directivity bandwidth of 8%.
10 July 2012 in IEEE Transactions on Antennas and Propagation
A simple method is presented to obtain a high-gain dual-band electromagnetic band gap (EBG) resonator antenna. The antenna is based on a one-dimensional EBG structure, made out of two low-cost unprinted dielectric slabs. The EBG structure is implemented as the antenna superstrate, which has been designed to provide a locally-inverted, positive reflection phase gradient with high reflectivity, in two pre-determined frequency bands. A composite dual-band antenna has been designed and tested with a stacked patch feed. Experimental results confirm the dual-band performance of the prototype antenna. Measured peak gains of 14.5 dBi and 15.1 dBi, and 3-dB gain bandwidth of 4.5% and 4.6%, are achieved at 10.6 GHz and 13.2 GHz, respectively. Measured 10-dB return-loss bandwidths are 6.4% and 3.9% in lower and upper bands, respectively. Potential enhancements of antenna radiation characteristics are studied using small 2 × 2 patch array feeds. It was found that such feeds can lead to lower side lobes, higher peak gains and larger gain bandwidths.
16 September 2014 in IEEE Antennas and Wireless Propagation Letters
A dual-band circularly polarized (CP) electromagnatic band-gap (EBG) resonator antenna (ERA) is presented. The antenna employs an all-dielectric superstructure, which consists of two identical unprinted dielectric slabs, and a dual-band corner-truncated patch feed. A prototype antenna is fabricated and tested using a superstructure made out of 3.175-mm-thick Rogers TMM10 material. Measured peak gains are 16.1 dBic [left-hand circular polarization (LHCP)] and 16.2 dBic [right-hand circular polarization (RHCP)], measured radiation efficiencies are 93% and 91%, and the boresight axial ratios are 1.9 and 1.5 dB at 9.65 and 11.75 GHz, respectively. This dual-band antenna is easy to fabricate, making it suitable for high-gain low-cost CP applications.
8 July 2015 in Electronics Letters
A quarter‐wavelength‐thick unprinted dielectric slab is placed above a slot antenna to achieve high gain with a large bandwidth. By optimally truncating the high‐permittivity superstrate to a small area of 2.25λ 0 2 , 8–10 dB enhancement in the directivity of the slot is achieved over a 3 dB directivity bandwidth of 16–18%. A prototype antenna was fabricated and tested at 11.5 GHz. Its measured peak gain is 16.95 dBi and the 3 dB gain bandwidth is 16.25%. The proposed antenna is simple and, more importantly, has a lower profile with a total height of 0.593 λ 0 .
1 July 2015 in IET Microwaves, Antennas & Propagation
Two identical unprinted dielectric slabs are placed above a dual‐polarised (DP) stacked‐patch feed antenna to transform its less‐directive radiation into almost equal and high‐gain DP beams in two frequency bands. The dual‐band operation is achieved by engineering the reflection characteristics of a classical all‐dielectric superstructure such that cavity resonance condition is satisfied in two frequency bands. A prototype of this dual‐polarised electromagnetic band gap resonator antenna with a frequency ratio of 1.245 has been fabricated and measured peak gains of 17 and 16.6 dBi at 10.6 and 13.15 GHz, respectively, and cross‐polarisation levels of less than –18 dB, have been achieved. The proposed antenna has a simple configuration and is easy to manufacture, making it a good candidate for DP point‐to‐point wireless links.