With the increasing use of proton therapy, there is a growing emphasis on including radiation quality, often quantified by linear energy transfer, as a treatment plan optimization factor. The Timepix detectors offer energy-sensitive particle tracking useful for the characterization of proton linear energy transfer. To improve the detector's performance in mixed radiation fields produced in proton therapy, we customized the detector settings and performed the per-pixel energy calibration. The detection threshold and per-pixel signal shaping time (IKrum current) were customized, and energy calibration was performed for MiniPIX Timepix3. The detector calibration was verified using α source and clinical proton beams, as well as Monte Carlo simulations. The effects on the detector's performance, in terms of spectral saturation and pixel occupancy, were evaluated. Measurements with proton beams showed a good agreement with simulations. With the customized settings, the measurable energy range in the detector data-driven mode was extended, and the signal duration time was reduced by 80%, while the yield of pixel time occupancy reduction depends on the number of occupied pixels. For performed measurements with proton beams, the number of occupied pixels was further reduced up to 40% due to the increased threshold. Customized detector configuration of the Timepix3 detector allowed for reduced pixel occupancy and mitigation of signal saturation in a data-driven mode without significantly interfering with the energy deposition measurement. The presented approach enables the extension of the operational range, including higher intensities and mixed-radiation fields in particle radiotherapy environments.
For fast neutron sources, such as compact neutron generators, it is desirable to have knowledge and ideally directly measure the energy spectrum of the generated neutrons. For neutrons, the produced radiation field, and the neutron energy spectrum, at a specific location from the source, can be altered by the distance to the source and become even significantly distorted by surrounding material — e.g. walls and the floor of the laboratory. To achieve this goal, we make use of the Time-of-Flight (ToF) technique, which has been implemented on the Timepix3 detector operated in highly integrated readout electronics as a miniaturized radiation camera MiniPIX-Timepix3. Equipped with a silicon sensor, the Timepix3 ASIC chip provides fast timing response of individual pixels at the nanosecond level. In this work, we use two Timepix3 detectors with a silicon sensor of thickness 300 μm and a segmented neutron conversion mask, intended for both thermal and fast neutrons and with a 65 μm thick silicon carbide (SiC) sensor. Demonstration and evaluation of the technique are provided by measurements with a compact neutron D-T pulsed generator at VSB-TU Ostrava laboratory which produces mono-energetic 14 MeV neutrons.
Silicon Carbide is a suitable semiconductor sensor for radiation measurement and nuclear applications. It has been recently implemented as a position-sensitive and radiation imaging device coupled to the Timepix3 ASIC chip in the form of a miniaturized radiation camera MiniPIX-Timepix3 SiC. In this work we systematically evaluate the detection resolving power to different radiation species: electrons, fast neutrons, ions and protons. Experimental calibrations were made at well-defined reference fields in terms of particle type, energy and direction. The spectral-sensitive tracking response and characteristic morphology of the particle tracks are analyzed by pattern recognition algorithms. The low thickness of the radiation sensitive volume (65 μm) of the SiC sensor limits the directional tracking response and angular resolution. Three broad classes of particle-type events are resolved. The detector together with suitable data processing can be used for radiation dosimetry and particle tracking tasks in space, particle therapy, nuclear physics and nuclear reactors and particle accelerator environments.
We present a novel approach to localizing radioactive material by cooperating Micro Aerial Vehicles (MAVs). Our approach utilizes a state-of-the-art single-detector Compton camera as a highly sensitive, yet miniature detector of ionizing radiation. The detector's exceptionally low weight (40 g) opens up new possibilities of radiation detection by a team of cooperating agile MAVs. We propose a new fundamental concept of fusing the Compton camera measurements to estimate the position of the radiation source in real time even from extremely sparse measurements. The data readout and processing are performed directly onboard and the results are used in a dynamic feedback to drive the motion of the vehicles. The MAVs are stabilized in a tightly cooperating swarm to maximize the information gained by the Compton cameras, rapidly locate the radiation source, and even track a moving radiation source.
27 April 2026 in IEEE Robotics and Automation Letters
We present a novel approach to localizing radioactive material by cooperating Micro Aerial Vehicles (MAVs). Our approach utilizes a state-of-the-art single-detector Compton camera as a highly sensitive, yet miniature detector of ionizing radiation. The detector's exceptionally low weight (40 g) opens up new possibilities of radiation detection by a team of cooperating agile MAVs. We propose a new fundamental concept of fusing the Compton camera measurements to estimate the position of the radiation source in real time even from extremely sparse measurements. The data readout and processing are performed directly onboard and the results are used in a dynamic feedback to drive the motion of the vehicles. The MAVs are stabilized in a tightly cooperating swarm to maximize the information gained by the Compton cameras, rapidly locate the radiation source, and even track a moving radiation source.