The aluminum metal matrix composites were broadly exploited in the applications of automotive, aerospace, and other defense with functionally graded materials-related application. Above applications definitely required excellent mechanical characteristics. Therefore, in this way, the major attempt was made on the nano-based composites with aluminum alloy utilization. In this research, aluminum alloy AA8011 and the ceramic-based reinforcement particles of nano boron carbide (B4C) were selected for producing the metal matrix composites by the liquefying process or stir casting route. The weight percentage of nano boron carbide particles having 15wt was subjected to add into the aluminum alloy during the stir casting process. Then, processed nano boron carbide and AA8011 specimens were prepared to conduct tribological behaviors with various processing conditions like sliding velocity, setting wear temperature, and applied load by the tribometer setup. The scanning electron microscope was employed to examine the processed composites samples and worn-out surface samples. Finally, the multiobjective optimization was used to measure the individual performances of the tribological parameters by the gray relational technique.
Epoxy, Fusion bonded epoxy and conducting polyaniline based paints were applied on low carbon steel sample. Conducting polyaniline and conducting polyaniline based paint was characterized by UV-visible absorption spectroscopy and scanning electron microscopy respectively. Cathodic polarisation was used to determine cathodic protection potential range of the uncoated and painted low carbon steel samples dipped in 3.5% NaCl. Cathodic impressed current range was found out using galvanostatic technique and used to impart cathodic protection to non coated and painted samples. Iron loss of uncoated and painted samples without cathodic protection and under cathodic protection was measured using spectrophotometry. It was found that conducting polyaniline based paint exhibits negligible iron loss ~0.06 ppm in 3.5% NaCl solution under impressed current cathodic protection. Conducting polyaniline based paint can be used in association with impressed current technique to protect low carbon steel cathodically in neutral medium. However, conducting polyaniline, as a pigment, becomes less effective in presence of coating defects due to exposure of the metallic surface to the electrolyte.
An AA-7475 is coated with superhydrophobic (SH) polymer nanocomposites (PNCs), emphasizing the coatings manufacturing, characterization, and anticorrosive qualities. Coating AA-7475 alloy with polyvinyl chloride (PVC), copper stearate (CS), and zirconium oxide (ZrO2) nanoparticles produces the desired superhydrophobic. Using an X-ray diffractometer, field-emission scanning electron microscopy, Fourier-transform infrared spectrometer, ZrO2 nanoparticles, CS, and PVC PNCs are analyzed structurally and molecularly. The atomic force microscope picture was analyzed to determine how the surface roughness affected the SH behavior reached by changing the weight percentage of ZrO2 nanoparticles from 0.6 to 3.0wt. PNC-5 with 3.0wt ZrO2 nanoparticles is used as resistance to corrosion coating for AA-7475 due to its water contact angle of 154. In a 3.5 NaCl solution, uncoated and PNC-5-coated AA-7475 are examined using potentiodynamic polarization and electrochemical spectroscopy. PNC-5 coating reduces AA-7475 corrosion rate from 23.75 to 0.2253mpy. In this study, we use polarization resistance, corrosion resistance efficiency, double layer capacitance, corrosion current density, and charge transfer resistance to demonstrate that the SH surface air trapping phenomena are responsible for effective corrosion resistance.