2 March 2020 in IEEE Transactions on Nuclear Science
A sensitivity characterization of a Xilinx Artix-7 FPGA against 14.2 MeV neutrons is presented. The content of the internal SRAMs and flip-flops were downloaded in a PC and compared with a golden version of it. Flipped cells were identified and classified as cells of the configuration RAM, BRAM, or flip-flops. SBUs and MCUs with multiplicities ranging from 2 to 8 were identified using a statistical method. Possible shapes of multiple events are also investigated, showing a trend to follow wordlines. Finally, MUSCA SEP3 was used to make assesment for actual environments and an improvement of SEU injection test is proposed.
9 May 2017 in The Astrophysical Journal
We perform simulations for future Cherenkov Telescope Array (CTA) observations of RX J1713.7−3946, a young supernova remnant (SNR) and one of the brightest sources ever discovered in very high energy (VHE) gamma rays. Special attention is paid to exploring possible spatial (anti)correlations of gamma rays with emission at other wavelengths, in particular X-rays and CO/H i emission. We present a series of simulated images of RX J1713.7−3946 for CTA based on a set of observationally motivated models for the gamma-ray emission. In these models, VHE gamma rays produced by high-energy electrons are assumed to trace the nonthermal X-ray emission observed by XMM-Newton, whereas those originating from relativistic protons delineate the local gas distributions. The local atomic and molecular gas distributions are deduced by the NANTEN team from CO and H i observations. Our primary goal is to show how one can distinguish the emission mechanism(s) of the gamma rays (i.e., hadronic versus leptonic, or a mixture of the two) through information provided by their spatial distribution, spectra, and time variation. This work is the first attempt to quantitatively evaluate the capabilities of CTA to achieve various proposed scientific goals by observing this important cosmic particle accelerator.
11 July 2016 in IEEE Transactions on Nuclear Science
Recently, the occurrence of multiple events in static tests has been investigated by checking the statistical distribution of the difference between the addresses of the words containing bitflips. That method has been successfully applied to Field Programmable Gate Arrays (FPGAs) and the original authors indicate that it is also valid for SRAMs. This paper presents a modified methodology that is based on checking the XORed addresses with bitflips, rather than on the difference. Irradiation tests on CMOS 130 & 90 nm SRAMs with 14-MeV neutrons have been performed to validate this methodology. Results in high-altitude environments are also presented and cross-checked with theoretical predictions. In addition, this methodology has also been used to detect modifications in the organization of said memories. Theoretical predictions have been validated with actual data provided by the manufacturer.
1 February 2018 in IEEE Transactions on Nuclear Science
This paper presents a SEU sensitivity characterization at ultra-low bias voltage of three generations of COTS SRAMs manufactured in 130 nm, 90 nm and 65 nm CMOS processes. For this purpose, radiation tests with 14.2 MeV neutrons were performed for SRAM power supplies ranging from 0.5 V to 3.15 V. The experimental results yielded clear evidences of the SEU sensitivity increase at very low bias voltages. These results have been cross-checked with predictions issued from the modeling tool MUlti-SCAles Single Event Phenomena Predictive Platform (MUSCA-SEP3). Large-scale SELs and SEFIs, observed in the 90-nm and 130-nm SRAMs respectively, are also presented and discussed.
8 February 2010 in IEEE Transactions on Nuclear Science
The influence of a load resistor on the shape of the single event transients was investigated in the LM124 operational amplifier by means of laser tests. These experiments indicated that, as a general rule, load resistors modify the size of the transients. SPICE simulations helped to understand the reasons of this behavior and showed that the distortion is related to the necessity of providing or absorbing current from the load resistor, which forces the amplifier to modify its operation point. Finally, load effects were successfully used to explain the distortion of single event transients in typical feed-back networks and the results were used to explain experimental data reported elsewhere.