6 February 2022 in Ironmaking & Steelmaking: Processes, Products and Applications
The effect of the metallurgical slags composition on their physical properties was studied employing the Directed Chemical Bonds Concept (DCBC). It provides an effective concentration and convolution of the ab-initio information on the type of bonds in multicomponent systems. The predictive models for viscosity (lnη) and electrical conductivity (lnχ) of CaF2-Al2O3-CaO slag system have been built. Slag is a crucial part of various metallurgical processes. The electroslag remelting (ESR) is the best example because its efficiency and resulting ingot soundness strongly depend on slag properties. For the two slags (with 1.5 and 3% SiO2), the condition of stable homogeneous structure (activation energies ratio Eη/Eχ ≤1) has been satisfied in the widest temperature range (1513–1773 K) with a suitable viscosity (0.02–0.09 Pa∙s) and electrical conductivity (100–270 1/Ohm∙m). The DCBC makes it possible to move from the empirical selection to the target-oriented design of a proper slag with specific physical properties.
2 March 2024 in International Journal of Metalcasting
The multi-material injector casting (MMIC) process allows the production of castings with two different alloys in a single process. The metal is introduced into the mold through a ceramic down sprue (injector) that moves with the rising surface of the melt. This results in a beneficial temperature distribution in the casting with enhanced filling and feeding properties. Combining two alloys in one casting affects the chemical composition, microstructure, and mechanical properties, which differ from those of the original alloys. The main goal of producing the dual-alloy castings is to adapt the alloy locally in the mixing zone according to the application needs. The original composition and characteristics of both alloys have to be ensured as much as possible. This article discusses the peculiarities of dual-alloy sand mold casting, considering the oxidation processes of the components under different conditions and the microstructure of the resulting ingots. The results of thermodynamic simulation, experimental dual-alloy sand mold casting, chemical composition, and macrostructure of the resulting castings are given in the article. The following factors have been investigated: the method of pouring two alloys (AlSi12 and AlSi9Cu3), which simulate two injector positions; the time between pouring each alloy (60, 90, and 120 s); the influence of a directional solidification with the bottom chill. The mixing zone was identified by the changes in the content of Cu measured by spark spectroscopy and EDS.
1 August 2018 in Journal of Achievements in Materials and Manufacturing Engineering
Purpose: The main task of this work was the developing of new compositions of the ESR slag that would keep the required amount of easily oxidizable elements in the superalloys and have the favourable physicochemical properties. Design/methodology/approach: Thermo-dynamic modeling was applied to estimate of oxidation effect of the slags on the Inconel 718 superalloy. Slag properties (viscosity, electrical conductivity and melting points) were measured by standard methodics. Findings: The effect of slags chemistry on the preservation of the active elements (aluminium, titanium) content in the superalloy while ESR remelting was studied. Physical properties of the several compositions of the slag are prospective for ESR of alloys with high content of active elements were measured. Research limitations/implications: The results of this work allowing development of a new compositions of the slags for ESR of the specific grades of the steel and alloys and making selection of the most effective ones. Practical implications: The obtained data make it possible to successfully select a slag for the ESR processing of the specific grades of steel and alloys in order to achieve the maximum process efficiency and the quality of the ready ingots. Originality/value: The integrated approach for the investigation of slag properties using developed thermo-dynamic model of the ESR process in the protective atmosphere gives us a deep understanding of the slag effect while melting and a resulting content of easy easily oxidizable elements in the superalloy Inconel 718.
28 March 2020 in Sovremennaâ èlektrometallurgiâ
Electrometallurgy Today, 2020, №01. SOVREMENNAYA ELEKTROMETALLURGIYA Quarterly scientific-technical and production journal. ISSN: 2415-8445, Since 1985. Text in Russian, contents and summaries in English. The journal presents the results of theoretical and experimental research carried out at the PWI in the field of electrometallurgy. Special attention is given to electroslag technology (electroslag melting, refining and casting). The journal is divided into the following main sections: electroslag technology; electron beam processes; plasma arc technology; vacuum arc remelting and vacuum induction melting; general problems of special electrometallurgy.
30 November 2017 in Ironmaking & Steelmaking: Processes, Products and Applications
A new slag susceptible to self-disintegration in the solid state due to formation of dicalcium silicate (2CaOSiO2) was developed. This compound reduces the thermodynamic activity of silica in a slag and, consequently, decreases silicon reduction and its transition to metal in the electroslag remelting process.
22 November 2025 in International Journal of Metalcasting
In the multi-material injector casting process, two different melts are cast consecutively into a mold through a ceramic injector. The current work comprises the manufacturing and characterization of Al/Al double-alloy castings using this novel process. The experimental setup is described, and castings consisting of EN AC-AlSi9Cu3(Fe) and EN AC-AlSi12(a) are fabricated. The influence of the time interval between casting both alloys on the mixing behavior and mechanical properties is investigated. Optical inspection and spark spectrometry testing showed the realization of multi-material components characterized by a vertical material gradient. The transition zone is investigated by tensile and torsion tests. In both experiments, the specimens failed predominantly in the weaker material, AlSi12. An early failure of the cohesive transition zone is not detected. The utilization of a digital image correlation system reveals a locally varying deformation behavior of the specimens during the tensile experiments.