In the multi-material injector casting process, two different melts are cast consecutively into a mold through a ceramic injector. The current work comprises the manufacturing and characterization of Al/Al double-alloy castings using this novel process. The experimental setup is described, and castings consisting of EN AC-AlSi9Cu3(Fe) and EN AC-AlSi12(a) are fabricated. The influence of the time interval between casting both alloys on the mixing behavior and mechanical properties is investigated. Optical inspection and spark spectrometry testing showed the realization of multi-material components characterized by a vertical material gradient. The transition zone is investigated by tensile and torsion tests. In both experiments, the specimens failed predominantly in the weaker material, AlSi12. An early failure of the cohesive transition zone is not detected. The utilization of a digital image correlation system reveals a locally varying deformation behavior of the specimens during the tensile experiments.
The increasing demand for components with tailored properties and functionally graded materials featuring adjustable interfaces is raising the requirements in gravity sand and die casting processes of aluminium. In response to these challenges, a novel controlled process based on injector casting is being developed. This innovative process involves the sequential pouring of two liquid aluminium alloys into a mould while mixing the two liquid phases. By adjusting the injector outlet, the process aims to achieve a horizontal flow deflection. This study systematically investigates two variations of horizontal deflections at the injector outlet and examines their impacts on flow volume rate, flow velocity, and the flow channel at the injector outlet in relation to their impact on the mixing characteristics. These variations are analysed through water model experiments. The findings from these water model experiments are critically evaluated to assess their applicability to the aluminium casting process. Based on these evaluations, conclusions are drawn to improve the design of an application-specific injector for a multi-material injector casting process (MMIC). The results offer valuable insights into optimising the manufacturing process to achieve the desired material properties and gradient configurations.