In this article, a hypersensitive multispectral partial discharge (PD) optical sensor array was developed, by which the optical pulses in seven independent bands can be acquired simultaneously. By using this sensor array, the multispectral pulses for three typical PDs in gas insulated system were obtained experimentally and analyzed with phase-based (phase-resolved) and nonphase-based (spectral-ratio-based) multispectral characteristics, respectively. It indicates that the multispectral characteristics produced by a specific discharge defect provide unique spectral signatures in discharge mode as well as stage evolution. Based on the intrinsic relationship between the discharge feature and optical emission spectrum, we adopted the classification algorithms and spectral-ratio-reserved multispectral characteristics to implement pattern recognition as well as assessment on the three typical PDs, which obtained the hit ratios exceeding 91%. In principle, such detection approach also supports the phase-independent PD diagnosis especially for dc power equipment.
Deterioration of insulation materials caused by partial discharge is one of the important reasons for the failure of power equipment. The noise caused by the interference of the external electromagnetic environment seriously affects the accuracy of partial discharge detection. Aiming at the problem of partial discharge noise suppression, this paper proposed a partial discharge signal noise suppression method based on adaptive window singular value decomposition. This method first randomly generated a series of windows with different positions and lengths on the noisy partial discharge signal; Then singular value decomposition method was employed to denoise the signals in each window; Finally, the denoising index was chosen as the fitness function, through the particle swarm algorithm to obtain the optimal solution of the window position and length. The noise signals obtained by simulation and experiment were verified, and the method was compared with adaptive singular value decomposition, wavelet denoising, and other methods. The results showed that this method could achieve a better denoising effect.
1 October 2020 in Journal of Physics: Conference Series