Ming Dong

Prof. Dr. Ming Dong

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 January 2020 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
BWBin Wang
Bin Wang
MDMing Dong
Ming Dong
MRMing Ren
Ming Ren
ZWZhanyu Wu
Zhanyu Wu
CGChenxi Guo
Chenxi Guo
JXJiacheng Xie
Jiacheng Xie
As an onsite condition monitoring method, infrared inspection can help to discover and analyze abnormal temperature increases in power equipment. To improve the efficiency of onsite diagnosis of insulators in substations, this paper proposes an automatic diagnosis method using instance segmentation and temperature analysis of infrared insulator images. To develop this method, thousands of infrared images from field inspection databases were collected to establish an annotated data set of insulator images. With the aid of Mask R-CNN it was possible to extract multiple insulators automatically in the infrared images. Transfer learning as well as the dynamic learning rate algorithm were then employed to realize the training process of Mask R-CNN with the annotated image data set. The result of the testing experiment showed that the mAP of the model is 0.77 and the FPS is 5.07, which indicated great identification accuracy and computing speed of the proposed model. Next, function fitting was realized to extract the temperature distribution of each insulator. Finally, to evaluate the condition of each insulator, rules, which are based on the related standards, were established using machine language. This is the first time that the machine could independently realize fault analysis of multiple insulators in the infrared images, which is a great attempt to adapt the development of the Internet of Things and the tendency of predictive maintenance. Moreover, because of the universality of the model algorithm used, automatic infrared fault diagnosis for other power equipment could also be performed in a similar manner, which has significant potential applicability in the area of power equipment diagnosis.

8 November 2020 in High Voltage
Verified
Journal Article
Open access
PDF file
CXChangjie Xia
Changjie Xia
MRMing Ren
Ming Ren
BWBing Wang
Bing Wang
MDMing Dong
Ming Dong
GXGuanghao Xu
Guanghao Xu
CZChongxing Zhang
Chongxing Zhang
As a non‐contact temperature distribution measurement method, infrared thermography (IRT) has emerged as an indispensable tool in condition monitoring and fault diagnosis of electrical equipment based on the absolute and relative temperature values. Manual fault inspection, as an expert‐experiences based evaluation method, has formed a mature technical scheme with a large number of application cases. However, the efficiency and accuracy of manual fault inspection are being challenged by the rapid growth in the number of equipment in power grid. The situation is improving with the advanced of image processing technique. Machine‐assisted fault diagnosis provides a novel method to assist human beings to complete fault diagnosis under the intervention of human prior knowledge. However, the limitations of infrared images bring challenges to image analysis processing especially target detection. In pursuit of automatic fault diagnosis, deep learning algorithms are introduced to achieve target detection in the complex environment. This study reviews the development of IRT‐based diagnostics beginning with the general procedures, objects, and limitations of IRT‐based fault inspection, and then gives an insight into the popular machine‐assisted fault diagnosis as well as image‐based intelligent fault identification. In addition, the future recommendations of IRT are also provided from construction of intelligent infrared detection system, establishment of an open and shared infrared image database and comprehensive utilization of joint visualization diagnosis technology.

22 May 2019 in IEEE Transactions on Power Delivery
Verified
Journal Article
Closed access
TZTianxin Zhuang
Tianxin Zhuang
MRMing Ren
Ming Ren
XGXuze Gao
Xuze Gao
MDMing Dong
Ming Dong
WHWenguang Huang
Wenguang Huang
CZChongxing Zhang
Chongxing Zhang
Insulation condition monitoring is essential for the safety of our distribution power gird. However, the traditional monitoring solution is hardly applied due to the concerns arise from natures of distribution grid, such as complex feeder networks, massive operation site and high economic benefit. In this paper, a wireless sensing network based on IoT technology is demonstrated for insulation condition perception. First of all, the general framework of the wireless sensing network is designed with considerations on extendibility and accessibility. Next, it goes into detail about the technical requirements of the essential units of the sensing network including sensor node, power management and data communication. With this concept, two practical cases of IoT-based partial discharge sensing networks realized on the switchgear cabinet and power cable are presented with details involving the design of TEV and HFCT sensor nodes, the energy consumption, Lora/NB-IoT-based network structures and data usage strategies. This IoT-based insulation condition monitoring is proven to be applicable for the distribution grid and expected to be references for more possible IoT applications.

25 March 2022 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
CXChangjie Xia
Changjie Xia
MRMing Ren
Ming Ren
RCRongfa Chen
Rongfa Chen
JYJiahe Yu
Jiahe Yu
CLChen Li
Chen Li
MDMing Dong
Ming Dong
In this article, a hypersensitive multispectral partial discharge (PD) optical sensor array was developed, by which the optical pulses in seven independent bands can be acquired simultaneously. By using this sensor array, the multispectral pulses for three typical PDs in gas insulated system were obtained experimentally and analyzed with phase-based (phase-resolved) and nonphase-based (spectral-ratio-based) multispectral characteristics, respectively. It indicates that the multispectral characteristics produced by a specific discharge defect provide unique spectral signatures in discharge mode as well as stage evolution. Based on the intrinsic relationship between the discharge feature and optical emission spectrum, we adopted the classification algorithms and spectral-ratio-reserved multispectral characteristics to implement pattern recognition as well as assessment on the three typical PDs, which obtained the hit ratios exceeding 91%. In principle, such detection approach also supports the phase-independent PD diagnosis especially for dc power equipment.

10 November 2017 in Sensors
Verified
Journal Article
Open access
PDF file
MRMing Ren
Ming Ren
JZJierui Zhou
Jierui Zhou
BSBo Song
Bo Song
CZChongxing Zhang
Chongxing Zhang
MDMing Dong
Ming Dong
Ricardo AlbarracínRicardo Albarracín
Ricardo Albarracín
Optical detection is reliable in intrinsically characterizing partial discharges (PDs). Because of the great volume and high-level power supply of the optical devices that can satisfy the requirements in photosensitivity, optical PD detection can merely be used in laboratory studies. To promote the practical application of the optical approach in an actual power apparatus, a silicon photomultiplier (SiPM)-based PD sensor is introduced in this paper, and its basic properties, which include the sensitivity, pulse resolution, correlation with PD severity, and electromagnetic (EM) interference immunity, are experimentally evaluated. The stochastic phase-resolved PD pattern (PRPD) for three typical insulation defects are obtained by SiPM PD detector and are compared with those obtained using a high-frequency current transformer (HFCT) and a vacuum photomultiplier tube (PMT). Because of its good performances in the above aspects and its additional advantages, such as the small size, low power supply, and low cost, SiPM offers great potential in practical optical PD monitoring.

13 September 2018 in IEEE Transactions on Power Delivery
Verified
Journal Article
Closed access
MDMing Dong
Ming Dong
BWBin Wang
Bin Wang
MRMing Ren
Ming Ren
CZChongxing Zhang
Chongxing Zhang
WZWenbin Zhao
Wenbin Zhao
Ricardo AlbarracínRicardo Albarracín
Ricardo Albarracín
This paper proposes a joint visualization detection method to diagnose outdoor insulation status of high-voltage (HV) equipment in substations, which applies image matching and fusion techniques to accurately combine the results of ultrasonic, ultraviolet, and infrared detection in an image. This image can then be used to quickly and clearly locate the region of corona discharge and overheating of outdoor substation HV equipment. First, ultrasonic localization visualization of corona discharge is proposed, which is based on the designed double-helix array and multi-signal classification algorithm. This method provides a more intuitive way for the diagnosis of outdoor insulation status. Then, ultraviolet localization visualization method is detailed, and an adaptive affine matrix is designed for the accurate location of corona discharge. Following this, infrared-visible detection of overheating failure is introduced, and the speeded-up robust features (SURF) algorithm and random sample consensus (RANSAC) algorithm are used to implement image fusion process. Finally, the results of image fusion are provided, and location error evaluations are conducted for each module. With acceptable cost and advantages of three detection method, the proposed visualization method is used for evaluating the insulation status of substation equipment more intuitively and conveniently, and thus has an extensive application prospect.