9 July 2020 in IEEE Access
A resonant-type piezoelectric screw motor for one degree of freedom (1-DOF) positioning platform is proposed, fabricated, and investigated in this article. The motor comprises a driver and a screw rod. The driver is composed of four transducers, a nut seat, and a flange nut. The flange nut is bolted connected on the nut seat, and the four piezoelectric transducers are connected with the nut seat by right-angle flexible hinges. Each piezoelectric transducer comprises two piezoelectric stacks and one displacement amplifier. Driven by the four piezoelectric transducers, elliptical vibration is generated by the driver, which is used to actuate the screw rod to realize the linear movement. The driver is analyzed using the finite element analysis software ANSYS. The proposed motor and positioning platform prototype are manufactured, assembled, and tested. The performance of the developed piezoelectric screw motor shows its applicability and effectiveness for the 1-DOF positioning platform with a large force. Experiments demonstrate that the maximum velocity of this motor is 10.53 mm/s without mechanical load and the maximum output force of the platform can reach 17.19 N when the excitation voltage is 230 Vp-p at 365 Hz.
28 June 2021 in Smart Materials and Structures
A novel piezoelectric screw pump is proposed in this study to improve the output flowrate of piezoelectric valveless pump. Piezoelectric screw pump is composed of a piezoelectric driving system and a screw pump body, which could realize the separation of driving and pump body. The driving system consists of two groups of piezoelectric vibrators and a ring hinge. The piezoelectric vibrators are made of four displacement amplifiers and four piezoelectric stacks. The screw pump body consists of an outer cylinder, a threaded pipe and a screw. The threaded pipe and screw are designed with rectangular threads. A certain clearance exists on their matching surface as the liquid flow channel. The screw pump body is made by 3D printing. This paper introduces the operating principle of the piezoelectric screw pump, and analyzes the factors influencing the output performance by finite element simulation. Four groups of piezoelectric screw pump prototypes with different parameters are made. The simulation results are verified by experiments. The experimental results show that under the driving voltage of 600 V pp , the maximum back pressure of the prototypes is 5.3 kPa, and the maximum flowrate is 71.4 ml min −1 .
17 August 2023 in Journal of Micromechanics and Microengineering
This paper proposes, designs, manufactures and experimentally studies a wedge valve piezoelectric pump driven by a double displacement amplifier vibrator (DDAV). A novel wedge valve is designed, manufactured and analyzed, and the static performance of the wedge valve is tested. The test results show that it has less forward resistance and high reverse shutoff. The DDAV and pump body are designed, and the test experimental platform is built. Results indicate that the static opening pressure of the wedge valve is 0.27 kPa, and the reverse shutoff pressure can reach 200 kPa. When the driving voltage is 700 Vpp and the driving frequency is 425 Hz, the maximum flow rate is 491.2 ml min−1 and the maximum output pressure is 160 kPa.
21 November 2019 in IEEE Access
n order to completely avoid the inter-axis coupling phenomenon in the triaxial force measurement process and improve the measurement accuracy, an air-supported force measurement method considering both supporting and force measurement is proposed. Based on this, a triaxial force measurement device without inter-axis coupling is constructed. The model of air-supported one-axis force measuring unit and air-supported triaxial force measurement device are established. An air-supported triaxial force measurement platform is developed to explore the measurement accuracy of the force in each axial direction and the Inter-axis coupling phenomenon. The experimental results show that the air-supported triaxial force measurement platform has the characteristics of "no Inter-axis coupling" and "high precision". The measurement error of the air-supported triaxial force measurement platform is 0.17% in the x-axis direction and 0.10% in the y-axis direction.