4 January 2023 in Applied Surface Science
21 November 2022 in Applied Physics Letters
Diamond has compelling advantages in power devices as an ultrawide-bandgap semiconductor. Using first-principles calculations, we systematically investigate the structural and electronic properties of hydrogen-terminated diamond (H-diamond) (111) van der Waals (vdW) heterostructures with graphite and hexagonal boron nitride (h-BN) layers. The graphite/H-diamond heterostructure forms a p-type ohmic contact and the p-type Schottky barrier decreases as the number of graphite layers increases. In contrast, the h-BN/H-diamond heterostructure exhibits semiconducting properties and a tunable type-II band alignment. Moreover, the charge transfer is concentrated at the interface with a large amount of charge accumulating on the C–H bonds on the H-diamond (111) surface, indicating the formation of a highly conductive two-dimensional hole gas (2DHG) layer. In a similar vein, the promising structural and electronic properties of graphite, h-BN, and H-diamond (111) in the graphite/h-BN/H-diamond (111) vdW heterostructure are well preserved upon their contact, while such heterostructure exhibits flexible band offset and Schottky contacts. These studies of interface engineering for H-diamond heterostructures are expected to advance the application of 2D materials in H-diamond field effect transistors, which is an important development in the design of surface transfer doping for 2DHG H-diamond devices.
30 July 2024 in IEEE Transactions on Components, Packaging and Manufacturing Technology
In 2.5D packaging, thermal aggregation and signal crosstalk have been major obstacles in the development of high-density interconnect technology, greatly impacting the reliability of devices. This work presents a polycrystal/monocrystal diamond interposer with excellent thermal conductivity and low dielectric constant as a substitute for the Si interposer, aiming to address both thermal and electrical issues simultaneously. The thermal and electrical characteristics of Si, glass and diamond interposers are investigated by analyzing heat transfer, heat dis-sipation and electrical characteristics. The results show that diamond interposers are expected to effectively improve the heat transfer effect with the equivalent thermal conductivity of through-diamond via cell always greater than 1200 W/m·K. The overall thermal resistance and peak temperature of the polycrystal diamond interposer drops by 0.75 °C/W and 23.9 °C compared to Si. The improved temperature uniformity of diamond inter-poser helps to reduce the risk of mechanical failure and delay of the chip. Furthermore, the peak transmission coefficient in through-diamond via cell is -0.24 dB, which experienced a lower return loss compared to through-silicon via. Diamond interposers provide effective solutions for thermal management and signal crosstalk in 2.5D packages, making it promising candidate in the field of highly reliable packaging.
4 October 2023 in IEEE Transactions on Electron Devices
Diamond surfaces provide an innovative platform for the exploitation of electronic devices. In this work, we investigate the structural and electronic properties of hexagonal beryllium oxide (h-BeO)/hydrogen, fluorine, oxygen, and oxidized silicon (H, F, O, O-Si)- terminated diamond (100) heterostructures by first-principles calculations. The results indicate that the h-BeO /(H, O-Si)-diamond heterostructures demonstrate lower binding energies and higher interfacial charge transfer compared to the h-BeO /(F, O)-diamond systems. Furthermore, the h-BeO /H-diamond heterostructure shows semiconducting characteristics with a direct bandgap of 4.80 eV, where the h-BeO layer forms a Type-II band alignment with the H-diamond surface. The resultant band offsets are 2.75 and 1.42 eV, indicating that h-BeO can be considered a high-quality gate dielectric material for 2-D hole gas (2DHG) H-diamond field-effect transistors (FETs). A low electron affinity is established on the (H, O-Si)-diamond surfaces and the h-BeO /(H, O-Si)-diamond interfaces form a downward band bend, which contributes to the formation of normally- OFF diamond FETs. This study provides an in- depth theoretical understanding of the normally- OFF characteristics for 2DHG diamond FETs and demonstrates the excellent potential of h-BeO on (H, O-Si)-diamond surface for diamond devices.
16 May 2025 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Printed circuit boards (PCBs) often experience warpage during reflow soldering due to thermal stresses. This study presents a simplified approach to analyze PCB warpage by focusing on warpage change instead of absolute warpage. Absolute warpage is difficult to simulate accurately due to challenges in defining temperature loads, boundary conditions, and the zero stress-strain temperature. Warpage change, which compares warpage at elevated temperatures (e.g., 150°C) with a baseline (30°C), isolates thermal deformation and simplifies the simulation process. The study also introduces an image processing method to accurately identify the Cu distribution in each PCB layer, which is critical for determining material properties. Using finite element modeling (FEM) and incorporating both Cu distribution and initial warpage, this method provides more consistent and reliable warpage predictions. Simulation and experimental results demonstrate that warpage change is a more effective metric for evaluating PCB thermal deformation, offering valuable insights for improving PCB design and manufacturing.