Grenoble Electrical Engineering Laboratory (G2Elab) – Universite Grenoble Alpes, Grenoble 38400, France, and Centre National de la Recherche Scientifique (CNRS), Paris 75016, France
Auto-generated profile, based on publicly available information
Van-Sang Nguyen
Grenoble Electrical Engineering Laboratory (G2Elab) – Universite Grenoble Alpes, Grenoble 38400, France, and Centre National de la Recherche Scientifique (CNRS), Paris 75016, France
This paper presents a specific architecture for a low-side/high-side gate driver implementation for power devices running at high switching frequencies and under very high switching speeds. An electromagnetic interference (EMI) optimization is done by modifying the parasitic capacitance of the propagation paths between the power and the control sides, thanks to a specific design of the circuit. Moreover, to reduce the parasitic inductances and to minimize the antenna phenomenon, the paper studies which elements of the drivers' circuitry must be brought as close as possible to the power parts. This is important when the ambient temperature of the power device becomes critical, for instance, in automotive and aeronautic applications. Simulations and experiments validate the advantages of the proposed architecture on the conducted EMI problem.
5 February 2018 in IEEE Transactions on Power Electronics
This paper presents a study on the gate driver circuitries that need to be implemented to drive several power devices in series connection. More specifically, the propagation paths of parasitic currents through the gate driver circuitries, exited under high switching speeds, are studied in different configurations trying to minimize common mode currents generated. In a gate driver for a regular low side/high side configuration, the voltage transient dv/dt at the middle point applied across the primary-secondary parasitic capacitance of gate driver supplies and control signal isolation units are the reasons for the generation of conducted EMI perturbations. In complex power converters, multi-cell, multi-level or even series connection of power devices, there are several dv/dt generated at different floating points producing conducted EMI perturbations from the power part to the control part through many gate drivers. Based on previous works, this paper analyses the best configuration to minimize parasitic currents, especially reducing the conducted common mode currents in series connected transistors topologies. Simulations and practical results validate the analysis for two power devices in series connection, and then the extrapolations for more power devices in series connection, up to six are discussed and analyzed with the help of simulations results.
2 July 2020 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This paper presents a cascaded gate driver architecture to improve the switching speed of series-connected power devices. The main idea is to propose a new technique to increase the dV=dt of the devices when their voltages are already balanced. In complex power converters like multi-cell and multi-level topologies, and series-connected power devices, many driver circuits are required and implemented. In such converters, there are several dV=dt sources generated at different floating points associated to the parasitic capacitances of the isolated barriers of the gate drivers (supplies and control signal isolation units), which can amplify the conducted electromagnetic interference (EMI) perturbations and therefore the switching speed of the power devices can be affected. This paper is focused on the analysis of a new cascaded configuration of gate drivers to increase the switching speed, and consequently reducing the switching losses of the series-connected transistor topologies. This improvement is achieved by reducing the equivalent parasitic capacitance of the gate driver circuitry considering the gate driver architectures: a new concept of Cascaded Gate Driver is presented. Theoretical and experimental measurements are used to support the Cascade Gate Driver Architecture proposed in this paper.