Computer modeling of fast capillary discharge is performed to investigate a new laser active medium created by excited hydrogenlike boron ions leading to lasing at 26.23 nm. Recombination excitation of the boron ions is expected in the undercooled pinching plasma created during the expansion phase of the pinch. Plasma dynamics is described by the magnetohydrodynamic code NPINCH and the plasma ion kinetics is evaluated according to the FLY code. Results of simulations for capillary filled with boron are reported and compared with previous results achieved for nitrogen filled capillary. In both cases, the same nonablative capillary with radius of 1.6 mm is presumed and the current pulse with 50 kA peak value and current slope are taken into account. Evaluated pressure optimized gains are 1.04 and are found for boron and nitrogen filled capillary, respectively. Capillary wall ablation is then also assayed.
The evolution of a nitrogen plasma discharge in a tube with an inner diameter of 9.2 mm, excited by a particular pulse shape, is studied to suppress ablation from the inner wall. Excitation is realized by two current pulses. The first one is a long pre-ionization pulse, which guarantees the stability of the plasma column, and the second one is a higher current pulse, which causes the detachment of the discharge plasma from the wall. The evolution of plasma in the tube is modeled using the magneto-hydrodynamic code NPINCH in two approximations: (1) non-ablative and (2) strongly ablative walls. The time dependences of the optical radiation power in the direction along the discharge tube axis are measured and compared with simulated experimental results in non-ablative and ablative approaches. Time dependence of the measured optical radiation emission corresponds to the non-ablative model. In the selected large diameter capillary, the development of the pinching plasma is not significantly affected by the ablation of the material from the capillary walls.