1 June 2013 in Archives of Civil and Mechanical Engineering
1 September 2019 in Advances in Science and Technology Research Journal
The paper presents the results of experimental investigations, the aim of which was to determine the degree of weakening of skin sheet of the thin-walled structure through a single-row welded joints made by Refill Friction Stir Spot Welding (RFSSW) technology. At the beginning, a short...
1 January 2023 in Advances in Mechanical and Materials Engineering
The paper presents the results of the research determining the impact of structural modifications of adherends on the load capacity of the joints determined in the static shear test. Tests of adhesive lap joints of S235JR steel sheets bonded with Araldite 2014-2 epoxy adhesive are described. The influence of technologically simple structural modifications was investigated; it consisted in making notches and holes at the leading edge of the adherends. These modifications were aimed at bringing about local flexibility of the joint in the sensitive area of stress concentration. Based on experimental studies, it was shown that there is a possibility of increasing the load-bearing capacity of the joint due to the applied modifications; in the most favorable variant, an increase in the load-bearing capacity by 15.9% compared to the base variant was demonstrated. The tests confirmed that the notches filled with the adhesive in the front part of the adherends can significantly improve the strength properties of joint, while the considered modifications in the form of holes do not have a significant impact on the properties of the adherends. W pracy przedstawiono wyniki badań określające wpływ modyfikacji konstrukcyjnych elementów klejonych na nośność połączeń określoną na podstawie próby statycznego ścinania. Opisano badania zakładkowych połączeń klejonych blach ze stali S235JR łączonych klejem epoksydowym Araldite 2014-2. Określono wpływ prostych z technologicznego punktu widzenia modyfikacji konstrukcyjnych, polegających na wykonaniu wcięć oraz otworów przy czołowych krawędziach klejonych blach. Modyfikacje te miały na celu doprowadzenie do lokalnego uelastycznienia połączenia we wrażliwym obszarze, w którym dochodzi do koncentracji naprężeń. Na podstawie badań eksperymentalnych wykazano, że istnieje możliwość zwiększenia nośności połączenia dzięki zastosowanym modyfikacjom, w najkorzystniejszym wariancie wykazano wzrost nośności o 15,9% w stosunku do wariantu podstawowego. Przeprowadzone badania potwierdziły, że wypełnione klejem wcięć w czołowym obszarze połączenia może prowadzić do redukcji spiętrzenia naprężeń, co prowadzi do znaczącej poprawy właściwości wytrzymałościowych złącza klejowego. Wykazano również, że modyfikacje w postaci otworów o rozważanych wymiarach nie mają istotnego wpływu na właściwości połączeń.
1 April 2025 in Advances in Science and Technology Research Journal
Sanitary manhole covers, such as infrastructure lines, drainage, and stormwater, are important in drainage systems. In recent years, there have been intensive attempts to improve the performance of these covers and reduce their costs. This study investigates the mechanical behaviour and...