Zinah M. Alsaad

Zinah M. Alsaad

Auto-generated profile, based on publicly available information

Zinah M. Alsaad

Air Force Research Laboratory, Space Vehicles Directorate, Kirtland AFB 1 , New Mexico 87117

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 April 2023 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
ANA. T. Newell
A. T. Newell
JLJ. V. Logan
J. V. Logan
RCR. A. Carrasco
R. A. Carrasco
ZAZ. M. Alsaad
Z. M. Alsaad
CHC. P. Hains
C. P. Hains
PWPreston T. Webster
Preston T. Webster
The effect of majority carrier concentration and minority carrier lifetime on the performance of mid-wave infrared ( λ cutoff = 5.5 μ m ) nBn detectors with variably doped InGaAs/InAsSb type-II superlattice absorbers is investigated. The detector layer structures are grown by molecular beam epitaxy such that their absorbing layers are either undoped, uniformly doped with a target density of 4 × 1015 cm−3, or doped with a graded profile, and variable-area mesa detector arrays are fabricated. Each material's temperature-dependent minority carrier lifetime is determined by time-resolved photoluminescence, and majority carrier concentration is extracted from capacitance–voltage measurements. Detector performance is evaluated with dark current and photocurrent measurements, from which quantum efficiency and shot-noise-limited noise-equivalent irradiance are calculated. The two doped detectors have lower dark current densities compared to their undoped counterpart due to the reduction in diffusion current as well as suppression of depletion current. Although both intentionally doped devices exhibit lower minority carrier lifetimes relative to the undoped device, the device with graded doping maintains a comparable quantum efficiency to the undoped device. Ultimately, the graded doping structure exhibits the highest sensitivity with a shot noise-limited noise-equivalent irradiance of 6.3 × 1010 photons/cm2 s in low-background light conditions, within a factor of 4× of an infrared detector pixel with Rule 07 dark current density and unity quantum efficiency. A detailed analysis of the dark current, quantum efficiency, and minority carrier lifetime provides insight into the material and device design factors that must be considered to realize a device with optimal sensitivity.

4 March 2024 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
JLJ. V. Logan
J. V. Logan
PWPreston T. Webster
Preston T. Webster
LHL. Helms
L. Helms
PGP. C. Grant
P. C. Grant
CHC. Hains
C. Hains
CMC. P. Morath
C. P. Morath
The effects of 63 MeV proton and 60Co gamma irradiation on the operation of 4.3 μm cutoff nBn photodetectors are demonstrated separately, and both are shown to yield a total ionizing dose (TID) effect. The effect is shown here in an InAsSbBi nBn detector and has been observed in other bulk alloy nBn detectors, and is unusual as it is notably absent in superlattice nBn detectors. The non-antireflection coated detectors exhibit a pre-radiation quantum efficiency of 17% at 3.3 μm wavelength and a dark current density of 50 μA/cm2, or roughly 300× the Rule 07 expectation, at their ideal operating voltage of −0.4 V bias at 150 K. Step-wise proton irradiation and in situ measurement indicate that the dark current increases to about 400× Rule 07 at the highest proton dose level of 150 krad(Si) (9.10 × 1011 p+/cm2), while the quantum efficiency is degraded at a relatively faster rate than the majority of analogous detectors characterized by our lab. Both the photocurrent and dark current are also shown to exhibit a turn-on voltage magnitude reduction of 100 mV following either gamma or proton irradiation, a trend which is attributable to negative trapped charge at the barrier interface (TID effect). This theory is further supported by an observed capacitance density magnitude reduction with dose and affirmed with Silvaco TCAD simulations. Following both proton exposure and subsequent anneal and gamma exposure and subsequent anneal; dark current, photocurrent, and CV all approach their pre-radiation baseline values.

24 September 2025 in Journal of Applied Physics
Verified
Journal Article
Open access
ANA. T. Newell
A. T. Newell
JLJ. V. Logan
J. V. Logan
RCR. A. Carrasco
R. A. Carrasco
CHC. P. Hains
C. P. Hains
ZAZ. M. Alsaad
Z. M. Alsaad
PWPreston T. Webster
Preston T. Webster
Alloys of GaInAsSbBi are grown by molecular beam epitaxy with various Bi compositions and subjected to a collimated beam of 63 MeV protons. Photoluminescence structures are used to evaluate the material’s minority carrier lifetime damage factor, and nBn structures are produced to investigate the detector’s rate of performance degradation. The lifetime damage factors of the photoluminescence structures containing 0.35% and 0.30% Bi are comparable at 2.4 × 10−6 and 2.2×10−6cm2/p+s, respectively, whereas the Bi-free counterpart sample exhibits a significantly higher lifetime damage factor of 3.8×10−6cm2/p+s. Two mid-wave infrared nBn detectors with 0.30% Bi absorbing regions, exhibiting a cutoff wavelength of 4.8 μm, are characterized in situ between step doses for dark current and quantum efficiency, and the dark-current-limited shot-noise-equivalent irradiance is calculated as a function of proton fluence. The noise-equivalent irradiance damage factor for both nBn structures is found to be 3.6 × 10−2 photons/p+, roughly 2.7× lower than other mid-wave infrared superlattice-based nBn detectors.

11 November 2024 in Journal of Applied Physics
Verified
Journal Article
Open access
ZAZ. M. Alsaad
Z. M. Alsaad
JLJ. V. Logan
J. V. Logan
CMC. P. Morath
C. P. Morath
PMP. N. McMahon-Crabtree
P. N. McMahon-Crabtree
LKL. N. Kulesza
L. N. Kulesza
PWPreston T. Webster
Preston T. Webster
Forthcoming infrared event-based sensors will have utility in the space-based surveillance domain where they could potentially perform traditional sensing and tracking functions with significantly enhanced temporal resolution and reduced downstream datalink demands and power consumption. As a first step toward extending event-based sensing technology into the mid-wave infrared, a DC simulation of the conventional event-based sensor unit cell's photoreceptor circuit is performed, and the results are compared with measurements of a printed circuit board implementation of the same circuit to assess what design freedom is available to interface the photoreceptor with a mid-wave infrared photodetector. Detailed analysis of the circuit and measurements provides insight into which fundamental properties of the transistors drive the photoreceptor's dynamic range and demonstrates several characteristics that are relevant to mid-wave infrared sensing. These characteristics include the capability to produce a stable, low voltage bias on the infrared photodetector to maximize sensitivity, and that operating the circuit below room temperature increases the photoreceptor's dynamic range. Measurements show that even the simplest implementation of the photoreceptor circuit exhibits a dynamic range of logarithmic compression of 150 dB at room temperature. However, the dynamic range is ultimately limited by the mid-wave infrared photodetector's dark current activation energy, which is significantly lower than the threshold voltage (energy) of the photoreceptor's feedback transistor and, thus, there is an incentive for the photodetector's dark current to be diffusion-limited.

18 August 2025 in Journal of Applied Physics
Verified
Journal Article
Open access
JLJulie V. Logan
Julie V. Logan
ZAZinah M. Alsaad
Zinah M. Alsaad
CSChelsey M. Sturtevant
Chelsey M. Sturtevant
PWPreston T. Webster
Preston T. Webster
CMChristian P. Morath
Christian P. Morath
RCRigo A. Carrasco
Rigo A. Carrasco
Pyroelectric detectors are commonly used as the reference detector when measuring a photon detector’s spectral response using a Fourier-transform infrared (FTIR) spectrometer because their fundamental spectral response is independent of wavelength. However, their photoresponse also depends on modulation frequency and, because the moving mirror in the FTIR modulates each wavelength of light at a different frequency, this introduces a frequency-dependent attenuation to measured interferograms. Depending on FTIR mirror speed, this results in significant variations of over 20% in certain regions of measured spectra. This work presents a physics-based transfer function approach to correct for this frequency-dependent attenuation and obtain accurate spectral measurements. Transfer function parameters for two different DLaTGS pyroelectric detectors are derived from spectra acquired at various FTIR mirror speeds. These functions are shown to effectively remove the frequency-dependent perturbations, aligning the spectra independent of mirror speed. Applying the correction when calculating the spectral response of a semiconductor-based infrared photon detector of interest yields an accurate spectral shape, while uncorrected spectra exhibit an unphysical increase at shorter wavelengths. This transfer function correction method provides a robust solution for accurate spectral measurements using pyroelectric detectors in FTIR spectroscopy.

24 September 2025 in Journal of Applied Physics
Verified
Journal Article
Open access
RCRigo A. Carrasco
Rigo A. Carrasco
PWPreston T. Webster
Preston T. Webster
ANAlexander T. Newell
Alexander T. Newell
CHChristopher P. Hains
Christopher P. Hains
JDJoshua M. Duran
Joshua M. Duran
DMDiana Maestas
Diana Maestas
GaInAsSbBi nBn photodetectors are grown lattice-matched on GaSb by molecular beam epitaxy. Device structures exhibit smooth surface morphologies, minority carrier lifetimes on the order of 0.5 μs at 130 K, and demonstrate a 4.8 μm wavelength cutoff, a 0.3 μm cutoff extension to a Bi-free GaInAsSb nBn counterpart. Dark current and quantum efficiency measurements of the nBn provide a 3–5 μm in-band shot-noise-limited noise-equivalent irradiance that is ∼12× the Rule 07 reference in which unity quantum efficiency is assumed. The analysis of the device behavior indicates that detector performance is limited by the valence band alignment at the barrier/active region interface, which imparts a barrier to photocollection at lower operating biases and leads to a significant reduction in the quantum efficiency with decreasing temperature. While more investigation is required to optimize the valence band alignment, the results in these detectors indicate that performance comparable to Rule 07 is within reach.