Mengya Xue

Mengya Xue

Auto-generated profile, based on publicly available information

Mengya Xue

Key Laboratory of Rock Mechanics and Geohazards of Zhejiang Province, College of Civil Engineering, Shaoxing University, Shaoxing, Zhejiang 312000, China

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2021 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
TWTianzuo Wang
Tianzuo Wang
CWChunli Wang
Chunli Wang
FXFei Xue
Fei Xue
LWLinxiang Wang
Linxiang Wang
BTBeyene Hana Teshome
Beyene Hana Teshome
MXMengya Xue
Mengya Xue
To explore the characteristics of rock deformation and failure under cyclic loading and unloading, the MTS815 rock mechanics test system and acoustic emission (AE) signal acquisition system were used to perform cyclic loading and unloading tests on red sandstone samples. The results showed that, compared with the uniaxial compression test, cyclic loading and unloading had a certain strengthening effect on the strength of the samples. The plastic deformation of the rock samples increased as the number of cycles increased. Based on AE signals, the cracking mode classification was analyzed on the basis of the average frequency and the rise angle of the waveforms. It was observed that the Felicity ratio gradually decreased with the increase in the stress level, which showed a cumulative damage effect. From the perspective of energy, the obvious increase of AE energy rate was mainly concentrated in the early and late stages of uniaxial compression, while the significant increase of dissipated energy rate occurred in the late stage of uniaxial compression. During the cyclic loading and unloading, most of the work done by external forces in the compaction stage and the elastic stage was converted into elastic strain energy, and dissipated energy began to gradually increase in the stage of stable fracture development. In addition, it was found that the damage evolution of the rock samples changed from slow to fast, and the dissipated energy ratio increased when failure was approaching.

25 October 2021 in Geofluids
Verified
Journal Article
Open access
PDF file
TWTianzuo Wang
Tianzuo Wang
LWLinxiang Wang
Linxiang Wang
FXFei Xue
Fei Xue
MXMengya Xue
Mengya Xue
HXHangcheng Xie
Hangcheng Xie
NTNingbo Tang
Ningbo Tang
Liquid nitrogen (LN2), which can greatly improve the efficiency of hot dry rock (HDR) mining, is commonly used as a cooling material in the enhanced geothermal system (EGS). Physical property, triaxial compression, and permeability tests were undertaken on treated granite samples, for a better scientific understanding of the effect of the LN2 cooling method on the mechanical and permeability properties of the rocks after heat treatment. The experimental results indicated that the physical properties of the treated granite change significantly, such as the density and wave velocity are substantially reduced. Meanwhile, with the increase of treatment temperature, the macroscopic cracks on its surface are gradually generated and the volume is expanded clearly. In addition, the surface wettability of granite gradually increases with increasing temperature. Compared with the air/water cooling methods, under LN2 cooling condition, the mechanical properties decrease markedly. When the temperature exceeds 600C, the granite strength decreases significantly to only 56.16 of the reference value. The deformation properties also change significantly, with a final strain of about 3 at failure for a sample at 800C, showing an obvious ductile deformation characteristic. Further, an appreciable correlation also exists between the initial permeability of granite and temperature. Once the temperature exceeds 200C, the increase in temperature contributes to the increase in initial permeability. In addition to the effect of temperature, the increase in load also leads to a change in the permeability coefficient. When the temperature reaches 600C, the permeability of granite first decreases and then increases with the increases in axial stress. The results of this paper are valuable in understanding the effect of thermal shock by LN2 on the fracturing efficiency and permeability characteristics of dry hot rocks.

1 January 2021 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
TWTianzuo Wang
Tianzuo Wang
MXMengya Xue
Mengya Xue
Peng ShaPeng Sha
Peng Sha
FXFei Xue
Fei Xue
LWLinxiang Wang
Linxiang Wang
In order to reveal the influence of prophase stress levels on the fatigue damage characteristics of granite, uniaxial fatigue tests of granite with different prophase stress levels were carried out on the basis of the MTS 815.04 rock mechanics test system. The results show that, under the same number of cycles, the failure degree increases with the increase of the prophase stress level. Under the low upper limit of cyclic stress, the tangent modulus and dissipated energy increase significantly with the increase of prophase stress level at the early stage of the cycle loading, while the increasing trend is not obvious with the increase of prophase stress level at the late stage. Under the high upper limit of cyclic stress, the tangent modulus and dissipated energy are less affected by the prophase stress level. The development trend of elastic release energy is not obvious with the increase of prophase stress level, which is less affected by the number of cycles. From the damage parameters defined by dissipative energy, under the low upper limit of cyclic stress, the initial damage is less affected by the prophase stress level. With the increase of the number of cycles, the influence of the prophase stress level on the development trend of the damage variable increases gradually. And the development trend of damage variables shows “C‐shaped” damage.