This article presents a ring voltage-controlled oscillator (RVCO)-based pulse-injection-locked clock multiplier (ILCM) with a complementary-injection scheme, an adaptive pulsewidth adjustment, and a hybrid frequency tracking loop (FTL). The developed complementary-injection scheme introduces a combination of traditional narrow-pulse injection and wide-pulse injection to achieve phase error cancellation and enhance noise suppression. Based on the derived optimal pulsewidth principle, the proposed adaptive pulsewidth adjustment technique automatically maintains the optimal noise suppression across process, voltage, and temperature (PVT) variations. To achieve enhanced in-band noise suppression and extend the locking range, a hybrid FTL that incorporates a conventional phase-locked loop (PLL), a developed timing-adjusted loop (TAL), and an automatic locking mechanism (ALM) is designed. Fabricated in a 28-nm CMOS process, the ILCM occupies an active area of 0.133 mm2. The measurement results show that it achieves 43.9-fs rms jitter and −59.1-dBc spur level. The calculated figure-of-merit (FoM) is −255.5 dB, which outperforms other state-of-the-art works.
8 April 2025 in IEEE Journal of Solid-State Circuits
This article presents a 112-Gb/s four-level pulse amplitude modulation (PAM-4) analog-to-digital converter (ADC)-digital signal processing (DSP)-based retimer transceiver for reaching-distance extension. An injection-locked oscillator (ILO)-based jitter-filtering clocking scheme with relaxed bandwidth limitation and low-power consumption is proposed to obtain synchronous low-jitter clocks. The transmitter (TX) utilizes an internal feed-forward equalizer (FFE) cascaded with a forward-coupling pad driver to improve the output inter-symbol interference (ISI) jitter, and a timing-optimized 4:1 multiplexer (MUX) to reduce the serialization jitter. The receiver (RX) combines a flexible continuous-time linear equalizer (CTLE), a signal-to-noise ratio (SNR)-optimized ADC with 8-bit quantization, and a high-resolution digital equalization to further minimize the bit-error rate (BER). Fabricated in a 28-nm CMOS process, the prototype transceiver achieves 1E-12 raw BER at 112 Gb/s while compensating 31.2-dB channel loss. The clock network delivers a rms recovered clock jitter of 252 fs and a power efficiency of 0.56 pJ/bit, which outperforms other state-of-the-art works.