2 January 2024 in International Journal of Environmental Studies
30 December 2023 in Mining of Mineral Deposits
Purpose. Development of a methodology for determining the thermal state of block inverse gravel filters manufactured using low-temperature technology during their transportation in a well based on computer and mathematical modeling. Methods. The study of hydrodynamic processes occurring during the transportation of the filter in the borehole, as well as the calculation of thermal fields in the filter body, was performed using the Ansys Fluent software package. To determine the effective thermophysical characteristics of the filter, the approaches of the heat transfer theory in porous media were applied. To investigate the thermal conditions of the filter at heat exchange with well fluid, the use of analytical solution of the heat conduction problem in a cylindrical shell, taking into account the properties of porous dispersed water-saturated medium, is proposed. Findings. The methodology for calculating the thermal state of a gravel filter during its operation in a well has been developed. For estimation of the filter surface temperature, the expression obtained on the basis of the analytical solution of the heat conduction equation, taking into account the characteristics of the porous filter medium, is proposed. Hydrodynamic and thermal fields in the borehole and the filter body during the filter transportation process in the borehole have been obtained. Originality. For the first time, the problem of heat exchange of a gravel inversion filter, manufactured by low-temperature technology in a well is considered. The influence of hydrothermal conditions in the well on the process of filter heating during its transportation in the well is shown. The hydrodynamic fields during the flow of the drilling mud around the inverse gravel filter are determined. Practical implications. The proposed approaches and results of the study allow to determine and can be used in the development of technological regulations for the use of block gravel filters produced by low-temperature technology for the equipment of hydrogeological wells. The methodology for modelling the process of two-phase inversion transition of aggregate state of the binding agent during transportation of inverted block-type gravel filter during well construction has been developed.
28 February 2023 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Purpose. Determination of the influence of mining and geological conditions of drilling hydrogeological wells with backwash on the technological parameters of the airlift method of cleaning it from drilled rock and the properties of the ascending flow of aerated washing liquids. Methodology. The tasks were solved by a complex research method, including analysis and generalization of literary and patent sources, analytical, experimental studies, using computer and mathematical modeling methods. Findings. An algorithm for the functioning of the airlift circulation method during rotary drilling with backwash has been developed. The algorithm takes into account: hydrostatic and hydrodynamic pressures, and the effect on them of the rate of drilling of the well; the effect of the sludge content in the upstream. The effective values of the airflow rate, the density of the water-air mixture and the velocity of its upward flow are established. A method for estimating the effective values of technological parameters and their changes in the upward flow of the mixture is proposed. A model has been developed that allows analyzing the dependences of the air flow rate, the density of the mixture and the rate of its ascent on the parameters of the well being drilled. The model is applied to typical drilling conditions of a large-diameter water intake well at the Samskoye groundwater deposit on the Mangystau peninsula. Originality. A mathematical algorithm has been developed for the functioning of the airlift backwash method when drilling large-diameter water intake wells. The method is based on the analysis of the pressure balance in the descending and ascending flows of the washing agent. For the case of backwash, a formula for estimating the content of sludge in it was obtained. A method has been developed for determining the average effective density of the mixture in terms of the height of the well, as well as the air content in it. Based on the average effective values, a method is proposed for estimating changes in the density of the mixture, its flow rate and velocity along the upward flow. Practical value. The proposed algorithm is the basis of a computer model that allows you to determine the dependences of the values of the density of the mixture, the content of air and sludge in it and the rate of ascent, from the depth of the well, the depth of the mixer descent, the speed of deepening, the specified velocity of the upward fluid flow, as well as the diameters of the well and drill pipes. Specific modeling results have been obtained in relation to the Samskoye groundwater deposit of the Mangystau peninsula.
30 December 2019 in Mining of Mineral Deposits
30 October 2023 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
New+Mining +https://doi.org/10.33271/nvngu/2023-5 +/jdownloads/pdf/2023/5/05_2023_contents-en-GB.pdf
15 April 2020 in Series of Geology and Technical Sciences