Silicon nitride attracts increasing interest in integrated photonics owing to its low propagation loss and wide transparency window, extending from to 2350 nm. Scalable integration of active devices such as amplifiers and lasers on the platform will enable applications requiring optical gain and a much-needed alternative to hybrid integration, which suffers from high cost and lack of high-volume manufacturability. We demonstrate a high-gain optical amplifier in monolithically integrated on the platform using a double photonic layer approach. The device exhibits a net gain of at 1532 nm, and a broadband gain operation over 70 nm covering wavelengths in the S-, C- and L-bands. This work shows that rare-earth-ion-doped materials and in particular, rare-earth-ion-doped , can provide very high net amplification for the platform, paving the way to the development of different active devices monolithically integrated in this passive platform.
Whispering gallery mode resonator lasers hold the promise of an ultralow intrinsic limit of detection. However, the widespread use of these devices for biosensing applications has been hindered by the complexity and lack of robustness of the proposed configurations. In this work, we demonstrate biosensing with an integrated microdisk laser. doped with was utilized because of its low optical losses as well as its emission in the range 1020–1050 nm, outside the absorption band of water. Single-mode laser emission was obtained at a wavelength of 1024 nm with a linewidth of 250 kHz while the microdisk cavity was submerged in water. A limit of detection of 300 pM (3.6 ng/ml) of the protein rhS100A4 in urine was experimentally demonstrated, showing the potential of the proposed devices for biosensing.
Amorphous Al2O3 is an attractive platform for integrated photonics, providing active and passive functionalities. We have developed an integration procedure to create active and passive regions at the same level on one wafer. This fabrication process reduces the number of fabrication steps compared to vertical integration of two materials. The main advantage is that all structures are defined within a single photolithography and etching step and are therefore automatically aligned. As a proof of principle, we demonstrated the luminescence of an active ring resonator with passive bus waveguide.
A low-loss, broadband and high fabrication tolerant optical coupler for the monolithic integration of and polymer waveguides is designed and experimentally demonstrated. The coupler is based on the adiabatic vertical tapering of the waveguides. Low-loss operation is experimentally verified at both 976 and 1460–1635 nm wavelengths. Measured losses per coupler are as low as 0.12 and 0.14 dB at 976 and 1550 nm, respectively, and below 0.2 dB at both wavelengths for lateral misalignments between the and polymer waveguides up to 1.0 μm.
3 April 2019 in IEEE Journal of Selected Topics in Quantum Electronics
Low-cost, high-performance integration technologies are instrumental for active-passive integrated photonics devices. The monolithic integration of $\rm Al_{2}O_{3}$ and $\rm Si_{3}N_{4}$ is studied, enabling to combine the promising optical features of $\rm Si_{3}N_{4}$ with the excellent optical gain characteristics of rare-earth-ion doped $\rm Al_{2}O_{3}$ . The $\rm Al_{2}O_{3}$ and $\rm Si_{3}N_{4}$ layers are separated by a thin SiO2 film and coupled by adiabatically width-tapered $\rm Al_{2}O_{3}$ and thickness-tapered $\rm Si_{3}N_{4}$ waveguides. In this work, a detailed characterization of the couplers as well as a study of the influence of the different design parameters and fabrication tolerances on the final device performance is presented. Test structures are characterized under TE polarization. Measured loss per coupler is as low as 0.26±0.03 dB at the wavelength of 1030 nm, and below 0.24 dB in the spectral window of 1460-1635 nm. Lateral misalignment of ±1 μm results in less than 0.6 dB increase of the coupler loss at 1030 nm, and the tolerance of misalignment goes up to 1.7 μm at the investigated longest wavelength of 1635 nm without introducing extra coupler losses. The reported integration technology paves the way towards a double-layer platform monolithically integrating $\rm Si_{3}N_{4}$ and rare-earth-ion doped $\rm Al_{2}O_{3}$ for active-passive photonic functionalities.
20 October 2021 in Journal of Lightwave Technology
The increasing need for more efficient communication networks has been the main driving force for the development of complex photonic integration circuits combining active and passive building blocks towards advanced functionality. However, this perpetual effort comes with the cost of additive power losses and the research community has resorted to the investigation of different materials to establish efficient on-chip amplification. Among the different proposals, erbium-doped waveguide amplifiers appear to be a promising solution for high performance transmission in the C-band band with low fabrication cost, due to their CMOS compatibility and integration potential with the silicon\silicon nitride photonic platforms. In this paper we provide a holistic study for high-speed WDM transmission capabilities of a monolithically integrated Al2O3:Er3+ spiral waveguide amplifier co-integrated with Si3N4 components, providing a static characterization and a dynamic evaluation for (a) 4 × 40 Gbps, (b) 8 × 40 Gbps and (c) 8×60 Gbps WDM transmissions achieving clearly open eye diagram in all cases. The active region of the erbium doped waveguide amplifier consists of a 5.9 cm Al2O3:Er3+ spiral adiabatically coupled to passive Si3N4 waveguides combined with on chip 980 nm/1550 nm WDM Multiplexers/Demultiplexers. Experimental results reveal bit-error rate values below the KR4-FEC limit of 2×10-5 for all channels, without any DSP applied on the transmitter or receiver side for a 4×40 Gbps and 8×40 Gbps data stream transmission.