18 January 2024 in Physica Scripta
The charge carrier density distribution in uniformly doped AlGaAs/GaAs superlattices with layer thicknesses of 1.5/10 nm and different numbers of quantum wells was studied. Both energy band theory and capacitance–voltage profiling were used to determine the carrier concentration profiles of the structures. During the analysis of the experimental and simulated capacitance–voltage characteristics, it was found that the maximum electron concentrations increase with an increase in the number of quantum wells from ∼ for three wells to ∼ for 25 wells with an overall superlattice doping level of ∼
1 January 2023 in Kondensirovannye sredy i mezhfaznye granitsy = Condensed Matter and Interphases
24 January 2022 in Surfaces and Interfaces
1 December 2022 in Scientific and Technical Journal of Information Technologies, Mechanics and Optics
Electron density distribution in uniformly doped AlGaAs/GaAs superlattices with respective layer thicknesses 1.5/10 nm and a different number of quantum wells was investigated. Experimental samples containing 3, 5 and 25 periods with the same layer parameters were grown by molecular beam epitaxy. Capacitance-voltage profiling was used to determine the carrier concentration profiles in the structures both numerically and experimentally. During the analysis of experimental capacitance-voltage characteristics it was found that the maximum electron concentration increases with an increase in the number of quantum wells starting from 7,1∙1016 сm–3 for 3 wells up to 9,2∙1016 сm–3 for 25 wells with overall superlattice doping level of 1017 сm–3. In some samples saturation areas are observed on the concentration profiles, that are associated with the region of superlattice. Concentration values, obtained from computer modeling, correspond to the experimental data with an error of less than 10 %. Capacitance-voltage profiling is a suitable technique for determining the carrier concentration profiles in thin barrier superlattices. Despite the fact that the method provides distribution of the “apparent” carrier concentration profile, it can be used to estimate the dopant atoms distribution in the strongly coupled quantum well heterostructures.
12 July 2024 in Kondensirovannye sredy i mezhfaznye granitsy = Condensed Matter and Interphases
The addition of a few percent of nitrogen to GaP or GaPAs allows obtaining GaPNAs solid solutions that are lattice-matched to the silicon substrate over a wide range of band gaps, which makes it possible to obtain optoelectronic silicon integrated circuits. However, materials with a small fraction of nitrogen are understudied due to the difficulty in epitaxial growth of quaternary solid solutions with three materials of group V. The purpose of the study was the investigation of the influence of the substrate temperature during the epitaxial growth of dilute nitride materials (GaPN solid solution and GaPNAs/GaP(N) superlattices) on their optical properties, as well as the influence of the growth temperature and superlattice design on the bandgap of the resulting material. It was shown that there is an optimal growth temperature for samples: at temperatures below the optimal, non-radiative recombination at defects predominates, and at a temperature higher than the optimal one, the solid solution of the GaPN layer material decomposes into components with a larger and smaller fraction of nitrogen. Studies were also carried out on the decay of photoluminescence intensity over time in the studied structures at room temperature, which allowed us to evaluate the influence of growth parameters and structure design on the lifetime of nonequilibrium charge carriers. The best lifetime for structures with superlattices was obtained for the GaPNAs/GaPN superlattice and amounted to ~0.2 ns. As a result, the optimal growth temperatures were determined for bulk GaPN layers and for GaPNAs/GaP(N) superlattices, which leads to an increase in the PL intensity and lifetime of the carrier
12 July 2024 in Kondensirovannye sredy i mezhfaznye granitsy = Condensed Matter and Interphases
Due to a large number of applications in the near and short-wave IR spectrum and a relatively high detectivity, PIN photodiodes based on epitaxial InGa(Al)As/InP heterostructures are of a great scientific interest. The operational spectral range of such photodetectors is up to 2.6 μm. However, to reach such wavelengths it is necessary to synthesize heterostructures with metamorphic buffer layers. In our study, we investigated the current-voltage and capacitance–voltage characteristics of PIN photodiodes based on InGa(Al)As/InP heterostructures with an original metamorphic buffer layer and an In0.83Ga0.17Asabsorbing layer grown by means of molecular beam epitaxy. The photodiode chips were formed using standard post-growth processing techniques. The diameter of the photosensitive area of the obtained diodes was 140 μm. The dark currents and the shunt resistance were ~ 300 nA and ~ 25 kΩ at the voltage of -10 mV respectively. Therefore, the suggested metamorphic buffer layer effectively eliminates threading dislocations in the active area of the heterostructure. The obtained heterostructures with metamorphic buffer layers can be used to produce IR photodetectors for the spectral range of 2.2-2.6 μm