Yuichiro Yamashita

Yuichiro Yamashita

Auto-generated profile, based on publicly available information

Yuichiro Yamashita

Taiwan Semiconductor Manufacturing Company (TSMC), Hsinchu 300-78, Taiwan

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 September 2019 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Open access
AXAugusto Ronchini Ximenes
Augusto Ronchini Ximenes
PPPreethi Padmanabhan
Preethi Padmanabhan
MLMyung-Jae Lee
Myung-Jae Lee
YYYuichiro Yamashita
Yuichiro Yamashita
DYDun-Nian Yaung
Dun-Nian Yaung
Edoardo CharbonEdoardo Charbon
Edoardo Charbon
This article introduces a modular, direct time-of-flight (TOF) depth sensor. Each module is digitally synthesized and features a 2x (8 x 8) single-photon avalanche diode (SPAD) pixel array, an edge-sensitive decision tree, a shared time-to-digital converter (TDC), 21-bit per-pixel memory, and in-locus data processing. Each module operates autonomously, by internal data acquisition, management, and storage, being periodically read out by an external access. The prototype was fabricated in a TSMC 3-D-stacked 45/65-nm CMOS technology, featuring backside illumination (BSI) SPAD detectors on the top tier, and readout circuit on the bottom tier. The sensor was characterized by single-point measurements, in two different modes of resolution and range. In low-resolution mode, a maximum of 300-m and 80-cm accuracy was recorded; on the other hand, in high-resolution mode, the maximum range and accuracy were 150 m and 7 cm, respectively. The module was also used in a flexible scanning light detection and ranging (LiDAR) system, where a 256 x 256 depth map, with millimeter precision, was obtained. A laser signature based on pulse-position modulation (PPM) is also proposed, achieving a maximum of 28-dB interference reduction.

16 April 2018 in IEEE Journal of Selected Topics in Quantum Electronics
Verified
Journal Article
Open access
Myung-Jae LeeMyung-Jae Lee
Myung-Jae Lee
AXAugusto Ronchini Ximenes
Augusto Ronchini Ximenes
PPPreethi Padmanabhan
Preethi Padmanabhan
TWTzu-Jui Wang
Tzu-Jui Wang
KHKuo-Chin Huang
Kuo-Chin Huang
Edoardo CharbonEdoardo Charbon
Edoardo Charbon
We present a high-performance back-illuminated three-dimensional stacked single-photon avalanche diode (SPAD), which is implemented in 45-nm CMOS technology for the first time. The SPAD is based on a P + /Deep N-well junction with a circular shape, for which N-well is intentionally excluded to achieve a wide depletion region, thus enabling lower tunneling noise and better timing jitter as well as a higher photon detection efficiency and a wider spectrum. In order to prevent premature edge breakdown, a P-type guard ring is formed at the edge of the junction, and it is optimized to achieve a wider photon-sensitive area. In addition, metal-1 is used as a light reflector to improve the detection efficiency further in backside illumination. With the optimized 3-D stacked 45-nm CMOS technology for back-illuminated image sensors, the proposed SPAD achieves a dark count rate of 55.4 cps/μm 2 and a photon detection probability of 31.8% at 600 nm and over 5% in the 420-920 nm wavelength range. The jitter is 107.7 ps full width at half-maximum with negligible exponential diffusion tail at 2.5 V excess bias voltage at room temperature. To the best of our knowledge, these are the best results ever reported for any back-illuminated 3-D stacked SPAD technologies.

1 January 2016
Verified
Conference Paper
Closed access
TAToshiki Arai
Toshiki Arai
TYToshio Yasue
Toshio Yasue
KKKazuya Kitamura
Kazuya Kitamura
HSHiroshi Shimamoto
Hiroshi Shimamoto
TKTomohiko Kosugi
Tomohiko Kosugi
SKShoji Kawahito
Shoji Kawahito
There is an increasing demand for high-reality video systems. The ITU-R has standardized video parameters for ultra-high-definition TV (UHDTV), and the full-specification video signal stated in this international standard is prescribed as having a 7,680 (H) × 4,320 (V) pixel count, 120Hz frame frequency with progressive scanning, 12b tone reproduction, and wide color gamut. A 33Mpixel 120fps CMOS image sensor with a 12b column-parallel analog-to-digital converter (ADC) is reported in [1]. In addition to standard operation, higher sensitivity, smaller pixels, and a higher frame rate of 240fps or more are required for CMOS image sensors. Backside-illuminated stacked CMOS image sensors [2] are effective for simultaneously achieving both high sensitivity for small pixels and high operation speed. However, these stacked structures are still insufficient for high-frame-rate UHDTV image sensors since the pixel wafer and the ASIC wafer are connected by through-silicon vias in the peripheral area.

8 November 2017 in IEEE Transactions on Electron Devices
Verified
Journal Article
Open access
TAToshiki Arai
Toshiki Arai
TYToshio Yasue
Toshio Yasue
KKKazuya Kitamura
Kazuya Kitamura
HSHiroshi Shimamoto
Hiroshi Shimamoto
TKTomohiko Kosugi
Tomohiko Kosugi
SKShoji Kawahito
Shoji Kawahito
In this paper, a 1.1- $\mu \text{m}$ -pitch 33-Mpixel 240-fps backside-illuminated 3-D-stacked CMOS image sensor with three-stage cyclic-cyclic-successive-approximation-register (SAR) analog-to-digital converters (ADCs) is developed. The narrow-pitch interconnection technology that connects the pixels and arrayed ADCs inside the pixel area is described. The 3-D-stacked architecture, constructed using the interconnection technology, makes it possible to place a $\textsf {1932} ~{(}\textsf {H}{)} \times \textsf {4}~ {(}\textsf {V}{)}$ correlated-double-sampling/ADC array underneath the pixel area. Furthermore, the pipelined and parallel operation of the three-stage cyclic-cyclic-SAR ADC architecture effectively reduces the conversion time period and power consumption and achieves 12-b precision within one horizontal scan time of $0.92~\mu \text{s}$ . As a result, the interconnection technology and ADC architecture achieved a high frame rate of 240 fps in 33 Mpixels. Random noise of 3.6 $\text{e}^{-}$ and low power consumption of 3.0 W were attained at an extremely high pixel rate of 7.96 Gpixel/s. A good figure of merit is achieved compared with recently developed image sensors.

15 May 2018 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
YYYuichiro Yamashita
Yuichiro Yamashita
SSShigetoshi Sugawa
Shigetoshi Sugawa
A color crosstalk model for an area image sensor with a color filter (CF) array is proposed, which quantifies the crosstalk in a physically intuitive manner by introducing “inter-CF optical crosstalk (inter-CF crosstalk).” The model separates the structural design originated crosstalk from the CF material itself, revealing the sole characteristics of microstructures on a photodiode. A constrained nonlinear estimation is used to solve the model equation of system matrices with an objective function focusing on matching between the modeled quantum efficiency spectra and measured ones at both the peak and crosstalk regions. The model is applied to 1.1- $\mu \text{m}$ backside-illuminated CMOS image sensors having four different kinds of optical structures on the photodiode of the same design, and successfully provides the ground of comparison with excellent matching between the models and the measurement results.

7 December 2018 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
YYYuichiro Yamashita
Yuichiro Yamashita
SSShigetoshi Sugawa
Shigetoshi Sugawa
A new figure of merit (FoM) is developed with a theory, which enables the comparison of power efficiency of different image sensors based only on the pixel array size, frame rate, and total power consumption. The mathematical foundation of the FoM is provided, enabling the application of FoM to a generic image sensor supporting various read-out configurations. The model assumes a nonlinear relationship between the power consumption and operating frequency of building blocks, and the nonlinear factor is numerically derived based on the analytical modeling of image sensors. The FoM is applied to the studies from 1999 to 2018, which clarifies the trend of improvement as well as visualizes several breakthroughs in the development history.