20 September 2018 in IEEE Journal of Solid-State Circuits
This paper presents a fully integrated, self-starting shock-optimized synchronous electric charge extraction (SECE) interface for piezoelectric energy harvesters (PEHs). After introducing a model of the electromechanical system under shocks, we prove that the SECE is the most appropriate electrical interface to maximize the harvested energy from our PEH. The proposed interface is then presented, both at system and transistor levels. Thanks to a dedicated sequencing, its quiescent current is as low as 30 nA. This makes the proposed interface efficient even under time-spaced shocks occurring at sporadic and unpredictable rates. The circuit is, for instance, able to maintain its self-powered operation while harvesting very small shocks of 8 μJ for every 100 s. Our chip was fabricated in CMOS 40-nm technology and occupies a 0.55-mm² core area. The measured maximum electrical efficiency under shocks reaches 91%. Under shocks, the harvested energy by the proposed shock-optimized SECE interface is 4.2x higher than using a standard energy harvesting circuit, leading to the best shock figure of merit (FoM) among the prior art.
7 March 2022 in Smart Materials and Structures
The present work deals with tunable electrical interfaces able to enhance both the harvested power and bandwidth of piezoelectric vibration energy harvesters. The aim of this paper is to propose a general, normalized, and unified performance evaluation (with respect to the harvested power and bandwidth) of the various electrical strategies that can tune the harvester’s frequency response. By mean of a thorough analysis, we demonstrate how such interfaces influence the electromechanical generator response through an electrically-induced damping and an electrically-induced stiffness. The choice of the strategy determines these two electrical quantities, and thus the achievable frequency response of the system. Thereafter, we introduce a collection of graphical and analytical tools to compare and analyze single- and multi-tuning electrical strategies, including a qualitative performance evaluation of existing strategies. Finally, we establish a unified comparison of single- and multiple-tuning strategies which is supported by the definition and evaluation of a new optimization criterion. This comparison reveals which strategy performs best depending on the electromechanical coupling of the piezoelectric harvester and on the losses in the electrical interface. Furthermore, it quantifies the power and bandwidth gain brought by single- and multi-tuning strategies. Such quantitative criterion provides guidance for the choice of a harvesting strategy in any specific applicative case.
20 December 2018 in Smart Materials and Structures
This paper introduces a new electrical strategy for maximizing the energy scavenged from highly coupled and lowly damped piezoelectric energy harvesters (PEHs). The proposed strategy named Short-circuit synchronous electric charge extraction (SC-SECE) introduces a SC phase whose start time ϕ
s
and duration Δ ϕ can be adjusted. The control of ϕ
s
and Δ ϕ allows to electrically adapt the dynamics of the electromechanical harvester. In a first part, we analytically derive the influences of ϕ
s
and Δ ϕ on the harvester dynamics, and prove that they both affect the damping induced by the electrical interface on the mechanical resonator and its resonant frequency. Thereafter, we numerically evaluate the SC-SECE performances as a function of the intrinsic harvester’s characteristics. We expose that if the coupling and/or mechanical quality factor of the harvester are important enough, the SC-SECE leads to enhanced power frequency responses compared to SECE and SEH strategies. Experimental results on a high coupling PEH associated with the SC-SECE strategy have been realized and are in good agreement with the analytical predictions. Under various vibrations amplitudes, the harvester’s resonant frequency has been tuned on a frequency range as large as 35% of its natural resonant frequency. We have been able to harvest more than 92 μ W for vibration frequencies ranging from 90 to 140 Hz, under an external acceleration of 0.2 G.
9 November 2022 in Smart Materials and Structures
Extending the frequency bandwidth (BW) of vibration energy harvesters (VEH) that power wireless sensor nodes is of scientific and industrial interest. In this aim, electrical methods to tune the resonant frequency of piezoelectric harvesters with strong electromechanical coupling coefficients have been developed. In this work, we provide guidelines for designing such strongly coupled VEH and present a broadband harvester with high normalized power density (NPD). Through an analytical model, we explain how the coupling coefficient and the quality factor of a cantilever can be jointly maximized, thereby maximizing the figure of merit . The proposed cantilever prototype made of PZN-5.5PT and aluminum offers one of the best coupling coefficients among the state-of-the-art ( k 2 = 49.8%) and a high quality factor (
Q
m
= 140). Associated to an appropriate tunable electrical interface (short-circuit synchronous electric charge extraction (SECE) in our case), the prototype exhibits a NPD of 12.0 mW g −2 cm −3 and a frequency BW of 36.0% (56.5 Hz around 157 Hz) at 0.34 m s −2 with a tunable electrical interface: the short-circuit SECE. This represents the highest product NPW × BW from state of the art.
25 November 2020 in Engineering Research Express
Acoustic power transfer and communication through metal layers is of great interest in many applications where the integrity of metal boxes, tanks, pipes or walls must be preserved by avoiding through-hole electrical connections. While acoustic power transfer has been widely studied last decades, the optimization of such systems has not been assessed comprehensively regarding the choice of transducers’ dimensions and materials and the impact of the wall characteristic acoustic impedance. This paper stands at answering these optimization issues, using a new implementation of an analytical model and two figures of merit to evaluate performances: the power transfer efficiency and a new figure of merit, the normalized transmitted power, a crucial characteristic for electronics implementation. Among other results, we disprove the commonly used design rule stating that equalizing the characteristic acoustic impedance of wall and transducers is the best option. We propose a method to quantify the impact of acoustic impedance mismatches on performances and show that intermediary layers sized with our optimization process can solve these acoustic impedance issues, resulting in an important gain in the transmitted power (multiplied by 40 in our example) and opening up great opportunities for the acoustic power transfer technology.
2 August 2024 in Energy Conversion and Management