This paper reports on a monolithically integrated gallium arsenide (GaAs)-based photonic integrated circuit platform for wavelengths around 1064 nm. Enabled by spatially selective quantum well removal and two-step epitaxial growth, it supports on-chip gain as well as passive waveguides. In addition, shallow- and deep-etched waveguides are realized. The former result in waveguide losses of less than 2 dB/cm, while the latter enable compact integrated waveguide components. To demonstrate the performance of the platform, racetrack ring resonators based on deep-etched Euler bends and shallow-etched directional couplers are realized, achieving high intrinsic quality factors of 2.6 × 105 and 3.2 × 105 for the fundamental TE and TM mode, respectively. To demonstrate the use of these resonators, ring-resonator-coupled lasers are fabricated, resulting in one-sided output powers of up to 14 mW and single-mode operation with 40 dB side-mode suppression. The successful integration of ring resonators on a GaAs-based active/passive photonic integrated circuit platform paves the way for the realization of fully monolithic, widely tunable, and narrow linewidth ring-resonator-coupled laser sources.
The mode hopping behavior of high-power distributed feedback lasers emitting near $$780\,\hbox {nm}$$ is studied. The lasers have highly reflective rear and anti-reflection coated front facets. The influence of the phase of the grating at the rear facet is investigated by means of numerical simulations in the time domain taking into account spatial hole burning and self-heating effects. The simulation results are in agreement with experimental findings.
We present a high-power ridge waveguide distributed feedback (DFB) laser with a high-reflective coating and a phase shift section at the rear facet. The phase shift section is realized by means of a micro heater that is placed parallel to the ridge waveguide and the uniform grating. This type of heater section is easy to integrate into existing laser designs and allows adjusting and controlling the spectral behavior of the distributed feedback laser by shifting the rear facet phase condition, which makes it possible to overcome the challenges of mode-hop-free tuning of regular DFB lasers with highly reflective cleaved rear facet. Accordingly, we use the device to quantify rear facet phase conditions where mode hops occur, which are compared to theory with good agreement.
A distributed feedback laser with integrated quarter‐wave phase shift and more than 100 mW optical output power at an emission wavelength of 780 nm is presented. The laser provides mode‐hop‐free tuning over a wide range of injections currents and operating temperatures by design and can serve as an enabling component for more complex systems such as chips with additional monolithically integrated amplifiers, chip arrays and sources for hybrid integrated photonic circuits.